







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Windows & Doors: The Long Beach Owner’s Guide
We install and service windows and doors that pair with James Hardie exterior trim and siding systems here in Long Beach, and most full replacements run $8,000 – $25,000 installed, depending on count, glazing and material. A single unit or a repair-level fix often lands between $450 and $1,800. This is planned work, not same-day work: we give you a written price first, then schedule an arrival window you can count on.
Owners usually find us after a smaller problem announces itself. A door starts dragging on the threshold once summer humidity settles in. Window trim pulls away from the wall after a stretch of marine air. Rainwater streaks the interior side of a frame during the first big storm of the season. That’s the moment the phone call happens, and it’s exactly the right moment.
To be clear about who we are: Penhallow Remodeling Long Beach is an independent remodeling contractor and not affiliated with James Hardie. We’re stating that plainly because it matters when you’re trying to source a part or a matching trim profile.
Key Takeaways
- Installed window and door replacement in Long Beach typically runs $8,000 – $25,000; smaller projects and repairs are less.
- James Hardie is known primarily for siding, trim and exterior products; window and door units are sourced from manufacturers and finished with Hardie trim systems, so matching the right profile matters.
- Written price before work starts, every time. The number on day one is the number on the invoice.
- 365-Day Done Right Promise backs every project in writing, with a free return visit if the work fails.
Which James Hardie Models This Applies To

This is where most homeowners get stuck, so let’s slow down for a moment. James Hardie’s core product line is fiber cement siding and trim, including the HardiePlank lap siding, HardiePanel vertical siding, and HardieTrim board families (HardieTrim Smooth, HardieTrim Rustic, and the HardieTrim Reveal lines). Windows and doors are typically supplied by window and door manufacturers, then finished with HardieTrim as the surrounding exterior trim system. What that means for you: when you’re matching a window or door surround, the part you’re often actually matching is the trim profile and the flashing detail around it, not a “Hardie window” itself.
Identify what you have before ordering anything. Look for a manufacturer label on the window sash or door jamb (often a sticker on the frame edge or a stamped marking on the sill). Measure the rough opening, not the unit itself. Record the trim profile: thickness, width, and whether it’s a smooth or textured finish. The compatibility gotcha most owners miss: HardieTrim boards are 11/16-inch to 1-inch thick depending on the line, and that thickness affects how the window trim laps against the siding and how the flashing sits behind it. Get that wrong and the trim won’t seat cleanly against the wall.
On the OEM-versus-aftermarket question, the honest answer for most Long Beach projects is that the window or door itself comes from a window manufacturer, and the trim and flashing components are what need to match a specific Hardie line. We source from recognized trade brands so the material behind the guarantee is solid, and we’ll walk you through what’s genuinely a Hardie-compatible part versus a generic substitute that won’t hold up in coastal air.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Windows & Doors Is Failing
These are the symptoms we hear about most often in Long Beach, and each one points to a specific underlying cause.
- Condensation between the panes. The sealed glass unit has lost its seal, which lets moisture in. This is a failed insulated glass unit (IGU), not a frame problem.
- Draft or cold spots near the frame. Weatherstripping or the seal around the unit has broken down, often after a few years of marine humidity expansion and contraction.
- Door dragging or sticking on the threshold. Wood or composite frames swell and shift with seasonal moisture, especially in older Long Beach homes three to five blocks from the water.
- Trim separating from the wall or bubbling paint. Water is getting behind the HardieTrim flashing detail, and the caulk line or the flashing itself has failed.
- Visible rot or soft spots around the frame. Ongoing moisture intrusion has reached the substrate. This one needs inspection before it spreads into the wall cavity.
Replacement Cost & What’s Included

In Long Beach, window replacement typically runs $4,500 – $15,000, while impact window installation (for properties that need it) runs $8,000 – $25,000. A repair-level fix on trim, flashing or a single failing unit often lands closer to $450 – $1,800. What drives the range up: number of openings, whether the rough opening needs reframing, the glazing package, and whether the existing trim system can be reused or has to be rebuilt.
Here’s what’s in the written price: removal of the old unit, any reframing, new flashing detail, HardieTrim replacement where it’s part of the job, prep and finish, and our 365-Day Done Right Promise. There are no change orders on the work we quoted, because the number on day one is the number on the invoice. Labor and materials are itemized so you can see exactly where the money goes.
| Service | Installed range (Long Beach) |
|---|---|
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Trim, flashing or single-unit repair | $450 – $1,800 |
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: confirm the manufacturer label on the frame, measure the rough opening, note the trim thickness, and photograph the failure point. What you shouldn’t do yourself is remove a window or door unit, reframe an opening, or rebuild flashing detail. Miss the flashing and water gets into the wall cavity, which turns a window job into a substrate repair. Older Long Beach homes near the water also tend to hide moisture damage that only shows up once the unit comes out. That’s not a scare tactic, it’s just the reality of coastal building stock.
Our technicians have up to 22 years of experience, arrive background-checked and uniformed, and a real person answers the phone 24/7. If you want a straight answer on whether your James Hardie-trimmed window or door needs a full swap or just a repair, give us a call. We’ll tell you which one it is.
FAQs

Well-installed windows with proper flashing and finish typically last 20 – 25 years, and HardieTrim holds up well to marine air when the finish is maintained. What fails first is usually the seal or the flashing detail, not the trim board itself. If yours is older than 20 years or the IGUs are fogging, call us at (833) 510-6967 for a free estimate.
Often yes. A failed seal, loose trim, or deteriorated caulk line can usually be repaired without replacing the whole unit. We’ll inspect and tell you honestly which one makes sense for your window or door. Call (833) 510-6967 for a free estimate and a written repair price.
A single window or door is typically a one-day job; a full-house replacement runs two to five days depending on count and whether reframing is needed. You’ll get a defined arrival window in writing before we start. Call (833) 510-6967 to schedule your free estimate.
We order from recognized trade brands and match the Hardie trim profile and thickness to your existing system, so the fit is right the first time. You’ll see materials itemized in your written quote, and the work carries our 365-Day Done Right Promise. Call (833) 510-6967 for a free estimate.
Get Your Written Price
We’re also glad to talk through window and door work alongside our cabinetry and countertop projects (KraftMaid, Cambria, Silestone are brands we install regularly) if you’re planning a bigger remodel. But for the window or door that’s failing right now, the next step is simple. Call Penhallow Remodeling Long Beach at (833) 510-6967 for a free estimate. You’ll get a written number before any work starts, a real arrival window, and a 365-Day Done Right Promise behind the job. A live person answers, any hour.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












