







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Long Beach Homeowners Choose CGI Construction
Penhallow Remodeling Long Beach provides independent CGI construction service in Long Beach: we install, repair and reface CGI frameless and ready-to-assemble cabinet lines in kitchens, baths and ADU kitchenettes. What sets our CGI work apart is diagnosis before demolition. We measure whether the box is still square before we quote a single door, so you pay for the repair the cabinet actually needs. We’re an independent CGI service provider, not affiliated with or authorized by CGI. Call (833) 510-6967.
Long Beach construction is its own animal. You’re building in a coastal port city where the California Coastal Commission, city building review and shoreline overlays can each take a turn at your plans, and where marine air and salt work on fasteners and metal every year the house stands. That shapes cabinet work more than most homeowners expect: coastal-facing walls in Belmont Shore and Naples take moisture differently than an inland wall in Lakewood-adjacent east Long Beach, and a kitchen set against an exterior wall needs its ledger and shims planned for a floor that may move.
Our crews work on independent installers who cut their teeth on CGI cabinetry and interior build-outs. Practical, layout-first advice. Not a catalog read back to you.
Why Trust Penhallow Remodeling Long Beach for Your CGI Construction?

Our technicians have up to 22 years of experience, and much of that time has been spent in kitchens and baths where CGI boxes are already in the wall. That matters because CGI’s frameless Euro construction behaves differently from a face-frame cabinet. Full-overlay slab and shaker doors, 32mm system holes, thin-core RTA boxes. We know which hinge plate a given box takes, and we know where the pilot holes tend to strip.
We use OEM-compatible CGI doors, hinges and glides when the box still has life left, and we say so plainly when it doesn’t. Warranty-safe practice means matching the factory face profile rather than talking you into a mismatched door that reads as a patch from across the room. When the original hardware is the weak point, we step up to quality aftermarket soft-close glides and hinges instead of replacing sound boxes.
Every job gets a written price before work starts, a defined arrival window, and our 365-Day Done Right Promise. Background-checked technicians in uniform. A live person answers the phone 24/7, so you’re not leaving a message and hoping.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Long Beach
CGI cabinets fail in recognizable patterns. Here’s what we see most often in Long Beach homes, and why each one happens.
- Frameless boxes racked out of square. Set a CGI Euro-style frameless run on an uneven slab or a garage-grade floor with no shim and ledger plan, and the boxes twist. Doors and drawers drift off alignment, and the gap at the top of a cabinet grows toward one end of the run. Long Beach’s older bungalows and post-war housing often have floors that have settled since the cabinets went in.
- Thermofoil and laminate faces peeling. The bottom rail and the cabinets flanking the dishwasher and sink take the steam. Moisture wicks under the foil edge, bubbles it, then lifts it. This is the single most common CGI door complaint we get, and it’s a face problem, not a box problem.
- Particleboard and MDF edges swelling. CGI RTA and MDF boxes are not water-resistant the way plywood is. A slow drip under the sink or a dishwasher leak swells the core along the bottom edge, and no amount of drying reverses it once the board has taken water.
- Glides and hinges stripping out. The pilot holes on CGI RTA boxes are thin. Load a 40-inch pot drawer to the top and the screws gradually wallow out. That grinding drawer under the cooktop is usually stripped glide screws, not a broken glide.
- Out-of-square boxes throwing the countertop and backsplash line. When the run racks, the countertop and backsplash joints don’t line up anymore, and a homeowner reads that as a countertop failure when the cabinets underneath are the real cause.
CGI Parts & Our Repair-vs-Replace Approach

Here’s how a typical CGI job usually goes. A homeowner notices the kitchen cabinet doors no longer sit flush and a drawer under the cooktop grinds when it opens. On inspection, the run was set years ago on a floor that has since settled, so the frameless boxes are out of square and the particleboard bottom rail near the dishwasher has begun to swell. A qualified local installer typically re-levels and re-shims the run, replaces the failed bottom cabinet and the stripped glides, swaps peeling thermofoil doors for OEM-matched faces, then checks the countertop and backsplash joints so the whole wall lines back up.
We choose CGI OEM parts when a factory-matched face is what keeps the kitchen from looking patched, and quality aftermarket soft-close hardware when the original hardware is the weak link. If the boxes are swollen or racked, refacing money is better spent toward replacement boxes than chasing delamination. We source parts per job rather than claiming a stocked shelf. Call (833) 510-6967 and we’ll tell you which side of that line your cabinets are on, with a written price before anything starts.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We check the box for square with a level and a diagonal measure, inspect the bottom rails near the sink and dishwasher for swelling, and test every hinge and glide under load. Written findings, written price.
- 2
Repair or install. Re-shim and re-level the run, replace failed boxes and stripped hardware, or install new CGI cabinetry with the ledger planned for the actual floor. OEM-matched doors where the face needs to blend.
- 3
Test. Open and close every door and drawer through its full travel. Check the reveal lines top to bottom, and verify the countertop and backsplash joints sit true across the wall.
- 4
Warranty. Written guarantee on every job, backed by our 365-Day Done Right Promise. If a repair fails inside the year, we return at no charge, no service call fee.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Long Beach
We work across CGI’s cabinet families: Euro-style frameless kitchen cabinets in full-overlay slab and shaker doors, the Ready-to-Assemble lines in white shaker and gray shaker finishes, wood and MDF vanity and bath cabinet collections, and solid-surface and quartz-compatible countertop and backsplash packages. That covers the full run from a full kitchen to a single bath vanity. Whether your boxes are ten years old or going in next week, we quote the work the same way: written price, real arrival window, clean job site. Call (833) 510-6967.
We Also Service These Brands
Penhallow Remodeling Long Beach isn’t tied to one brand. Alongside CGI, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz, and Kohler and Moen fixtures. If your kitchen mixes a CGI cabinet run with a Cambria top and Kohler faucet, you don’t need three contractors coordinating each other. One written price, one guarantee, one crew answerable for the whole room.
FAQs – CGI Construction Service in Long Beach

Yes, in most cases. Peeling thermofoil or laminate is a door-face problem, not a box problem. If the cabinet box behind the door is sound and square, we replace the failed faces with OEM-matched CGI doors and keep your existing boxes. You save the tear-out and the kitchen stays intact. If the box core has swelled, replacement is the honest answer, and we’ll show you why rather than sell you a remodel you don’t need.
Because the boxes themselves are out of square, not because the hinges keep failing. Frameless Euro boxes have no face frame to hide a twist, so a run set on a settled or uneven floor racks and every door inherits the lean. Re-adjusting hinges buys you weeks. Re-leveling and re-shimming the run fixes it. Long Beach homes with older floors see this often, and it’s the first thing we check.
It can be, if it’s installed with the floor conditions in mind. CGI’s RTA lines and frameless boxes fit compact kitchenettes well, and the cost leaves room in the budget for the countertop and fixtures. The catch is moisture and floor movement. An ADU or garage conversion often sits on a slab that moves, and the boxes need proper shimming and a water-resistant plan near the sink. We quote ADU cabinets the same as any other job. Call (833) 510-6967 for a written price.
An island is one freestanding cabinet run with a top, electrical if you want it, and a leveling job on one footprint. A full remodel is cabinet tear-out, new boxes across multiple walls, countertop, backsplash, plumbing and electrical. That’s why the ranges differ so much. A CGI island installation in Long Beach typically runs $3,000 – $10,000. A full kitchen remodel runs $14,000 – $45,000, and a smaller kitchen $9,000 – $20,000. Cabinet installation alone lands at $4,000 – $13,000. Call (833) 510-6967 for an exact quote. Estimates are free.
Not if the work is done correctly. Using OEM-compatible parts and matching the factory face profile is the warranty-safe path, and that’s how we work. Where a manufacturer warranty has lapsed or doesn’t cover a given failure, our own written guarantee and the 365-Day Done Right Promise stand behind the repair instead. We’ll tell you which coverage applies before you commit to anything.
It depends on scope, but here are real ranges for the Long Beach market. We give a written price before any work starts, so the number on day one is the number on the invoice.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (833) 510-6967 for an exact quote on your CGI job. Estimates are free.
A straight swap, same footprint and plumbing rough-in, is usually a one-visit job. Changing the vanity size or moving the drain puts it into a second visit. Bathroom vanity installation runs $800 – $3,000 depending on the cabinet, top and whether the plumbing has to move. Call (833) 510-6967 and we’ll give you a written price and a real window.
Book Your CGI Service in Long Beach, CA
If your CGI cabinets are racking, peeling or grinding, or you’re planning a new run for a Long Beach kitchen, bath or ADU kitchenette, call (833) 510-6967. We’ll inspect the boxes, tell you honestly whether repair or replacement makes sense, and put the price in writing before anything moves. Free estimates. Written guarantee on every project.
Written by the team at Penhallow Remodeling Long Beach.












