A Penhallow company - serving Long Beach, CA
An open living room and dining area after a whole-home remodel
T
Therma-Tru · Long Beach

Therma-Tru Construction Service in Long Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Long Beach Homeowners Choose Therma-Tru Construction

Penhallow Remodeling Long Beach provides independent Therma-Tru construction service across Long Beach: diagnosis, repair, slab replacement and full door installation on Therma-Tru entry and patio systems. We’re not authorized by Therma-Tru and we don’t pretend to be. What we bring is familiarity with the actual series in this city’s housing stock (Fiber-Classic, Smooth-Star, Classic-Craft, the Mahogany Collection) and the specific ways coastal air, salt and stucco detailing make those doors fail here.

Call (833) 510-6967

Therma-Tru doors sit on a lot of Long Beach homes, from pre-war bungalows near the older core to post-war tract houses on the east and north sides. Fiberglass slabs and composite frames hold up well when they’re detailed right and poorly when they aren’t. That’s most of what we see.

If yours is sticking, dragging, letting in water or won’t latch, call us at (833) 510-6967. You’ll get a written price before any work starts, and a live person answers the phone around the clock.

Why Trust Penhallow Remodeling Long Beach for Your Therma-Tru Construction?

A finished basement family room with a media wall and wet bar

Therma-Tru builds a good door. The problems we fix usually aren’t manufacturing defects; they’re installation and maintenance realities that show up years later. Knowing which is which is the whole job. Our technicians have up to 22 years of experience, and that time has been spent learning how a Fiber-Classic slab takes on water at the bottom rail, how a composite jamb behaves after a decade of sun-cycling, and when a door can be saved versus when it needs to come out.

We source OEM-compatible slabs, sills, sweeps and multipoint hardware. Where an aftermarket weatherstrip or closer matches the original dimensions and finish, we’ll use it and tell you why. When it doesn’t match, we don’t force it. Warranty-safe practice matters here: we keep the existing frame whenever it’s sound, because replacing a slab inside a healthy jamb preserves the rest of the assembly and costs you less.

You get a written price before work begins and a written guarantee on every repair. If something we fixed fails inside the guarantee period, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every Long Beach job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Therma-Tru Construction Problems We Fix in Long Beach

  • Fiber-Classic and Smooth-Star bottom-rail wicking. When the factory finish gets breached, or the sill pan doesn’t drain the way it should, the slab edge absorbs moisture and swells. The door starts dragging on the threshold or won’t latch because the slab has grown a fraction of an inch. This is the most common Therma-Tru call we get in Long Beach, and it’s almost always a water problem, not a hinge problem.
  • Rot and delamination at frame legs and sill. We regularly see Therma-Tru frames set directly against stucco without proper head flashing or a backer rod behind the joint. Coastal exposures make it worse: marine air and wind-driven rain find that gap, and the frame leg or sill rots from the outside in. Once the frame is saturated, rehanging a slab doesn’t solve anything.
  • Sagging or binding entry doors. Hinge screws pull out of the composite frame jamb after years of sun-cycling and heavy daily use. The door drops, rubs the strike side, and eventually stops latching cleanly. Sometimes the fix is longer screws and a hinge adjustment; sometimes the jamb itself has lost its bite and needs repair first.
  • Failed foam weatherstrip and door-bottom sweeps. Therma-Tru’s foam seals break down faster in salt-laden coastal air than they do inland. Wind-driven winter rain pushes past a worn sweep, and you end up with interior finish damage and rising energy loss long before you notice the seal itself is gone.
  • Multipoint lock hardware drift. On Therma-Tru doors with multipoint locking, the strike plates and keepers can shift as the slab moves with moisture and temperature. The handle turns but the door doesn’t seal tight, or one point engages while another doesn’t. It reads like a lock failure; it’s usually an alignment issue tied back to the slab or frame.

Therma-Tru Parts & Our Repair-vs-Replace Approach

A small remodeled galley kitchen with cabinets to the ceiling

We don’t stock Therma-Tru parts locally. Every part is sourced for the job once we’ve measured the door and identified the series. That’s slower than grabbing something off a shelf, but it means the slab, sill or sweep actually fits your frame instead of nearly fitting it.

Our stance on repair versus replace is straightforward. If the frame is intact and the slab is dry, replacing the slab or rehanging and re-weatherstripping the existing door is usually the honest call. It’s less disruptive, it costs less, and it keeps the rest of the assembly working. Once the bottom rail or the frame legs are saturated, though, patching around it just delays the same problem. Full replacement is the durable fix at that point, and we’ll tell you so plainly.

Every repair we do carries a written guarantee, and if the fix fails inside that window we come back at no charge. Call (833) 510-6967 for a free estimate and a written price before anything is ordered.

Our Therma-Tru Service Process – Step by Step

  1. 1
    Diagnosis. We check the sill pan and frame legs for rot, test the slab for moisture at the bottom rail, and look at hinge and strike alignment. A door that sticks usually tells you why once you know where to look.
  2. 2
    Written price. Before we touch the door, you get a written number: what we’ll do, what parts are involved, what it costs. The price on day one is the price on the invoice.
  3. 3
    Repair or install. We dry and re-seal a salvageable slab, replace the bottom sweep and weatherstrip, adjust hinges, or install a new OEM-compatible slab or full door assembly. Parts are ordered for your specific Therma-Tru series.
  4. 4
    Test. We open and close the door through a full cycle, check the latch and any multipoint hardware, and confirm the seal sits tight against the jamb. Then we clean up the site.
  5. 5
    Guarantee. You get a written guarantee on the work. If it fails inside the guarantee period, we return and fix it at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Therma-Tru Products We Service & Install in Long Beach

A low-threshold walk-in shower with a bench and grab bar

We work on the Therma-Tru series that show up most on Long Beach homes. Fiber-Classic and Smooth-Star entry and patio doors are the bulk of it. Classic-Craft shows up on higher-end entries, and the Fiber-Classic Mahogany Collection appears on homes where the entry was upgraded as part of a larger remodel.

On the installation side, we integrate Therma-Tru entry and patio doors into full kitchen and bathroom remodels and window replacement work. That’s the Penhallow scope: kitchen remodeling, bathroom remodeling, whole-home remodels. When the door is part of a bigger project, the door detailing gets the same written price and written guarantee as the rest of the job. We don’t claim authorization from Therma-Tru; we install and service their products as an independent contractor.

We Also Service These Brands

We’re not a single-brand shop. Alongside Therma-Tru doors, we work with KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone countertops, and Kohler and Moen fixtures. When a Therma-Tru door is part of a kitchen or bathroom remodel, you deal with one contractor and one written price instead of juggling three.

FAQs – Therma-Tru Construction Service in Long Beach

Is Penhallow Remodeling Long Beach an authorized Therma-Tru dealer or installer? No. We’re an independent contractor, not an authorized Therma-Tru dealer or installer, and we don’t claim any manufacturer authorization. We service and install Therma-Tru products using OEM-compatible parts. Call (833) 510-6967 for a free estimate.

My Therma-Tru Fiber-Classic door is sticking and the bottom rail looks swollen – can it be fixed or does it need replacement? It depends on how much moisture the slab has taken on. If the core is still dry and the swelling is limited to the edge, we can often dry and re-seal the slab, replace the bottom sweep and weatherstrip, and adjust the hinges. If the bottom rail is saturated, the slab needs replacing; the frame usually can stay. Call (833) 510-6967 and we’ll diagnose it and give you a written price either way.

Why do Therma-Tru doors in Long Beach fail faster than elsewhere? The marine layer, salt-laden coastal air and occasional heavy winter rain put more stress on door assemblies than inland conditions do. Fasteners and metal components corrode faster, moisture intrudes on coastal-facing walls, and foam weatherstrip breaks down sooner. A Therma-Tru frame set against stucco without proper head flashing rots faster here too. Long Beach projects near the water also face more layers of review, which is worth knowing if your door work is tied to a bigger remodel.

Can a Therma-Tru door be installed as part of a kitchen or bathroom remodel? Yes. Door and window integration is within our remodel scope, and we handle it as part of the same written price and written guarantee. Call (833) 510-6967 for a free estimate.

Do you repair Therma-Tru multipoint locks and weatherstrip, or only replace the whole door? We repair them. Multipoint lock hardware can usually be realigned, and weatherstrip and bottom sweeps are replaceable without touching the slab. We only recommend full replacement when the frame or slab has failed structurally. Call (833) 510-6967 for a free estimate and a written price.

How much does Therma-Tru construction cost in Long Beach? Here’s how our Long Beach pricing breaks down for door and window work within a larger remodel:

Service Typical Range (Long Beach)
Full Kitchen Remodeling (door and window integration within project scope) $14000 – $45000
Full Bathroom Remodeling $9000 – $28000
Window Replacement $4500 – $15000

Standalone door repair and slab replacement are quoted per job once we’ve measured and identified the series. Call (833) 510-6967 for an exact quote; estimates are free.

Book Your Therma-Tru Service in Long Beach, CA

Whether it’s a sticking Fiber-Classic slab, a rotting sill on a coastal-facing entry, or a Therma-Tru door going into a kitchen or bathroom remodel, we’ll diagnose it, give you a written price before work starts, and stand behind the repair in writing. Call Penhallow Remodeling Long Beach at (833) 510-6967 for a free estimate.

Written by the team at Penhallow Remodeling Long Beach.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A walk-in shower with large-format tile and a built-in nicheA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sink

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-6967
Local Service Coverage

Request a Free Estimate in Long Beach

Tell us what you need - Penhallow Remodeling Long Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch