







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Long Beach Owner’s Guide
When Long Beach homeowners search for KraftMaid roofing, they’re usually looking for roofing components that coordinate with KraftMaid’s cabinetry and exterior product lines, and that work is typically quoted as part of a roof repair ($400 – $1,800) or a full roof replacement ($8,000 – $20,000) depending on the scope. We aren’t affiliated with KraftMaid; we’re an independent remodeling contractor that installs and repairs the roofing systems around Long Beach that connect to KraftMaid-spec exterior packages. Most owners find us after they notice a soft spot near a dormer, granules in the gutter, or a stain on the ceiling below an exterior wall that a previous roofer said was already fixed.
The pattern is familiar: the leak was patched, the patch held for a season, and now the same corner is failing again. That’s usually not a roofing-brand problem. It’s a flashing, ventilation, or underlayment detail that was never done to spec in the first place.
Key Takeaways
- Roof repair in Long Beach runs $400 – $1,800; full replacement runs $8,000 – $20,000.
- Most KraftMaid-coordinated roof failures trace to flashing and ventilation details, not the shingles.
- Coastal Long Beach air is salt-laden and humid, which shortens the life of standard fasteners and edge metal.
- We give a written price before work starts, and the 365-Day Done Right Promise covers the install in writing.
Which KraftMaid Models This Applies To

KraftMaid’s exterior and roofing-adjacent lines aren’t identified by a single model number the way a bath vanity is. The label lives on the inside face of the cabinet door or on the back panel of the exterior package documentation, and it typically shows a series name, a finish code, and a production date. If your home was built or remodeled with KraftMaid cabinets and the exterior trim package was ordered to match, the finish code on that label is what a roofer needs to match fascia, soffit, and drip-edge profiles to the same color family.
The compatibility gotcha most Long Beach owners hit: KraftMaid finish codes are not standardized to any roofing manufacturer’s color system. A “painted linen” on a cabinet door and a “linen” on a fascia board from a different supplier will read as two different whites in coastal light. We match by physical sample, not by name.
On the OEM-versus-aftermarket question, roofing has no true OEM path the way cabinetry hardware does. Shingles, underlayment, flashing, and edge metal come from the roofing manufacturers, and the decisions that matter are:
- Shingle profile and exposure: 3-tab versus architectural, and the exposure (the visible height of each shingle course) has to match what’s already on the roof or the replacement will show a line where the new section meets the old.
- Flashing gauge: thin 26-gauge aluminum flashing is common and it’s the first thing to fail near the coast; 24-gauge or copper holds up far longer in Long Beach’s salt air.
- Underlayment type: felt versus synthetic. Synthetic is the honest upgrade for a coastal Long Beach roof because it resists the moisture cycling that comes with marine-layer mornings.
We also coordinate with products from Cambria, Silestone, and Kohler when a roof repair turns into an exterior refresh, but the roofing spec itself is what drives this page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Roofing Is Failing
Roof failures in Long Beach rarely announce themselves. They show up in small ways first. Here are the five symptoms we see most often, and what’s usually behind each one.
- Granules collecting in the gutter or at the downspout base. The shingle’s protective mineral surface is shedding, which means the asphalt underneath is aging faster than the rest of the roof. In Long Beach’s marine layer, this often starts on the north-facing slope first.
- A brown ring on the ceiling below an exterior wall. That’s water traveling along a flashing joint, typically where a wall meets the roof plane or around a vent pipe. The stain appears far from the actual entry point, which is why patching the visible spot rarely fixes it.
- Soft spots when you press near the ridge or a dormer. Decking has absorbed moisture long enough to delaminate. This one gets worse quietly and is the reason we don’t recommend waiting on a repair.
- Curling or lifted shingle edges along the eaves. Usually a ventilation problem. If the attic can’t breathe, heat builds and the shingles cook from underneath, and Long Beach’s warm afternoons accelerate it.
- Daylight visible in the attic between roof boards. That’s a direct opening, and it means water has a clear path. It also means the fix is structural, not cosmetic.
Any one of these is worth a look. Two or more together usually means the roof section needs replacement, not another patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Long Beach, roof repair runs $400 – $1,800 and full roof replacement runs $8,000 – $20,000. Those ranges are real installed prices, not a teaser. What moves you up or down:
- Square footage and pitch. A steep roof takes longer and needs more safety setup, which is labor.
- Flashing and edge metal. Upgrading from 26-gauge aluminum to 24-gauge or copper adds material cost but buys years in coastal air.
- Decking repair. Soft sheathing gets replaced, and that’s a per-sheet number on top of the roofing labor.
- Ventilation corrections. Ridge vents, soffit vents, or a solar attic fan, quoted as a line item.
Every quote is written before work starts, with parts and labor broken out, so the number on day one is the number on the invoice. Tile roof repair, where it applies, runs $600 – $2,500. The 365-Day Done Right Promise covers the installation in writing; if it fails inside the year, we come back and fix it at no charge.
DIY or Call Us?
Roofing is one of the trades where DIY goes wrong in ways that aren’t obvious until the next rain. Two stories up, on a pitch, with a flashing detail that has to shed water a specific direction, there’s very little margin. We’d rather be honest about that than sell you a ladder.
What an owner can safely check:
- Look at the attic from the hatch with a flashlight. Note any daylight, staining on the rafters, or damp insulation.
- Look at the gutters from the ground after a rain. Granule piles and shingle bits are a clear signal.
- Photograph any ceiling stain and measure it. That helps the estimate.
Where DIY goes wrong: climbing onto a wet or steep roof, prying shingles to check flashing (which can break the seal and create the leak you were checking for), and sealing a joint with caulk that will fail in a season. The three most common Long Beach roofing injuries we hear about are falls from ladder placement mistakes, cuts from exposed metal flashing, and respiratory problems from old roofing materials in an unventilated attic.
Call (833) 510-6967 and we’ll schedule a free estimate. A live person answers, and a background-checked, uniformed technician shows up in the window we gave you.
FAQs

Architectural shingles typically last 20 to 30 years in most climates, but Long Beach’s salt air and marine-layer humidity shorten that to roughly 15 to 22 years on the coastal side of the city, and the fasteners and flashing fail first, not the shingles. That’s why we spec 24-gauge or copper flashing on coastal Long Beach roofs. Call (833) 510-6967 for a free assessment.
Yes, if the damage is localized to a flashing joint, a small section of decking, or a few shingles, and the repair runs $400 – $1,800. If more than a quarter of the roof plane shows granule loss, curling, or soft decking, replacement at $8,000 – $20,000 is the honest recommendation, because patch after patch adds up to more than the replacement.
A repair is usually a single day; a full replacement on a typical Long Beach home is two to four days depending on pitch and decking condition. We give you the arrival window in writing and leave the site cleaner than we found it.
We order from recognized trade manufacturers and match to your existing roof by physical sample, not by name, because KraftMaid finish codes don’t translate directly to any roofing color system. Your written quote lists the shingle profile, flashing gauge, and underlayment type before work starts, and every job comes with the written guarantee.
Long Beach homeowners who’ve already been burned by a contractor who never showed shouldn’t have to wonder whether the next one will. We put the price in writing first, answer the phone 24/7 with a real person, and back the work with the 365-Day Done Right Promise and a free return visit if anything fails. Call (833) 510-6967 for a free estimate, and we’ll walk through what your roof actually needs.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












