







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Long Beach Owner’s Guide
KraftMaid fence installation in Long Beach typically runs $3,500 to $9,000 for a vinyl or aluminum run, and it’s scheduled work, not same-day emergency repair. That range covers materials, tear-out of the old line, post setting, and a written guarantee on the install. What brings most Long Beach homeowners to us isn’t a brand-new fence, though. It’s a fence panel or gate hardware they thought was matched to their KraftMaid build, only to find the replacement piece doesn’t line up. Fences age fast in Long Beach’s salt air, and the wrong part shows it within a season.
Key Takeaways
- Installed fence runs in Long Beach: $3,500 – $9,000, priced in writing before work starts.
- Salt air and coastal humidity drive faster corrosion on metal hardware than most of Southern California.
- Match the part by label and measurement, not by looks, before you buy anything.
- Our technicians have up to 22 years of experience, and every job carries the 365-Day Done Right Promise.
Which KraftMaid Models This Applies To

KraftMaid is a cabinetry and millwork brand, so if you’re matching a fence gate or hardware component to a KraftMaid element on your property, the fit depends on series and spec, not brand name alone. KraftMaid cabinet lines and the millwork that surrounds them (post wraps, panels, gates built to match a cabinetry finish) come in different profiles, and a part that fits one series won’t seat on another.
Here’s how to identify the right piece before you spend a dollar:
- Find the label. Look inside the gate frame, behind a hinged panel, or on the inner face of the post wrap. KraftMaid marks its components, and that sticker carries the series and part reference.
- Measure the actual opening. Not the old part. Sweep, swing, and frame dimensions from the fence line itself.
- Check the finish code. A paint or stain code lets you match a replacement to the surrounding fence, whether the millwork is the fence itself or a cabinetry-treated element alongside it.
On the OEM-versus-aftermarket question: for a failing hinge, latch, or bracket, a quality aftermarket piece in the correct spec often outlasts a like-for-like OEM replacement in coastal conditions, because the material grade matters more than the badge. For anything structural, match KraftMaid’s spec. We’re an independent service provider and not affiliated with KraftMaid, so we’ll tell you straight when the OEM part is the right call and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Fence Installation Is Failing
- Hardware that won’t tighten. Screws that spin in place mean the fitting has stripped or the material behind it has softened from moisture. Coastal Long Beach air accelerates both.
- A gate that sags or drags. A sagging gate usually means a hinge or post base has lost its grip or the post has shifted. Catch it early and the fix is a part; wait and it’s a new post.
- White or chalky deposits on metal. That’s corrosion starting, and it moves fastest on hinges, latches, and brackets. It’s the single most common failure we see on Long Beach fence lines.
- Panels that rattle or pull loose. Loose fasteners and shifting panels point to a failed connection or settling ground, not just a cosmetic issue.
- A finish that’s peeling or fading unevenly. Sun and salt strip finish unevenly, and the exposed spots then take on moisture. Fade alone isn’t failure, but peeling is a warning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence replacement and installation in Long Beach runs $3,500 to $9,000. What moves the number up or down: the length of the run, whether we’re tearing out old fencing or adding to a clean line, and the material you choose. A vinyl run sits at the low-to-mid end; an aluminum run with custom gate hardware prices higher.
Here’s where that range breaks down, transparently:
- Vinyl fence installation: $3,500 – $9,000
- Aluminum fence installation: $4,000 – $10,000
- Replacement hardware and gate parts (parts plus labor): typically a smaller line item within the range, depending on what’s failing.
Every job gets a written price before any work starts, so the number on day one is the number on the invoice. Every install carries a written guarantee, and for a failing repair we make a free return visit. Our technicians arrive background-checked and uniformed, and if the work fails inside the 365-Day Done Right Promise, we come back and fix it at no charge.
DIY or Call Us?
Some of this you can check yourself. Look for corrosion on hardware, tighten a loose latch screw, and confirm the part label and measurements so you’re matching the right piece. That’s good, safe information gathering, and it saves you time.
Where DIY goes wrong: you replace the hinge, and three weeks later the post it was anchored to lets go because the real failure was underneath. Coastal fencing is a system, and a part that seems to be the problem is often riding on a post or frame that’s failed. Replacing the visible piece without confirming the structure behind it is the most common wasted trip to the hardware store we hear about. If the water damage or failure runs into cabinetry-adjacent millwork, that’s a job for a written repair, not a weekend of guessing. Call (833) 510-6967 and we’ll tell you whether it’s a part or a bigger fix. Estimates are free.
FAQs

A properly installed vinyl run lasts 20 years or more, and aluminum hardware often lasts 10 to 15 years before corrosion bites, though Long Beach’s salt air shortens that compared to inland cities. How long anything lasts here depends on material grade and finish more than the brand.
Often, yes. A failing hinge, latch, or bracket can usually be replaced without touching the rest of the fence, and the finish can be matched if you have the color code. Structural failures at the post or frame are the ones that call for replacement. Call (833) 510-6967 for an exact quote after a look.
A single part swap or a short gate repair is usually a single visit. A full fence run install is scheduled over one to three days depending on length. You’ll know your defined arrival window before we come, and we don’t promise same-day on planned installs, because rushing a coastal install is how things fail. Call (833) 510-6967 to schedule your free estimate.
We match the piece by label, measurement, and finish code, and we source through recognized trade suppliers rather than stocking any parts. When a KraftMaid-spec component is what’s called for, we’ll order the right one, and when an equivalent does the job better in salt air, we’ll say so. We also install Cambria, Silestone, and Kohler products when a project crosses into cabinetry or fixtures.
Reach out to Penhallow Remodeling Long Beach and we’ll give you a written price before any work starts, confirm the arrival window, and handle the install to the standard we stand behind. Call (833) 510-6967 for your free estimate.
Written by the team at Penhallow Remodeling Long Beach.












