







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Caesarstone Home Additions & ADU: The Long Beach Owner’s Guide
Nothing has “failed” yet at the start of an addition, and that’s the honest starting point: a home addition in Long Beach typically runs $45,000 – $130,000 turnkey, and an ADU $90,000 – $220,000. This page exists for the owner standing in a finished addition where a Caesarstone surface is chipping at an edge, staining at the sink, or flexing underfoot because whatever sits beneath the slab moved. In Long Beach, that movement is common in older slabs and pier-and-beam floors near the shore. Penhallow Remodeling Long Beach is an independent remodeling contractor, not affiliated with Caesarstone, and we build additions and ADUs with Caesarstone surfaces specified from the start.
Which Caesarstone Models This Applies To

Caesarstone’s quartz lines come in a handful of families – Classico, Concetto, Supernatural, and the New Generation collections – and each has its own thickness and slab standards. The version detail that matters most is thickness: 13mm, 20mm, and 30mm slabs fail differently. A 13mm slab spanning a bar top in an ADU kitchenette needs correct substrate support; a 30mm slab at a bathroom vanity overhangs without flex. Identifying what you have takes the engraved slab label (usually the underside near a toe kick or drawer), the series name, and a real measurement – not a guess from a photo.
For Caesarstone specifically, the OEM-versus-equivalent decision is really a fabrication decision. Replacement slabs are matched by series and color name, but the seams, edge profiles, and cutouts are done by the fabricator, not the manufacturer. A contractor working with Caesarstone and Cambria knows the series codes and can source matched stock through local slab yards. The same goes for the surrounding build: KraftMaid and Wellborn cabinetry and Silestone or Cambria countertops get specified on the same drawings, so the addition reads as one build, not three installs glued together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Caesarstone Home Additions & ADU Is Failing
Watch for these five, and match the symptom to the cause before you accept a quote.
- Chipping along an edge or corner. Usually a fabrication edge that wasn’t eased enough for a well-used space. Quartz chips at exposed corners in a way granite rarely does.
- Staining that won’t lift near a sink or coffee station. Quartz is non-porous to most things, but prolonged sitting liquid at an unsealed seam draws in. The seam is often the culprit, not the surface.
- Flexing underfoot or a hollow sound at a slab joint. The slab isn’t the problem – the substrate or support beneath it has moved. Crawl space and old slab shifts are common in Long Beach additions where a new slab meets an original foundation.
- Hairline cracks radiating from a cutout. Often a sink or cooktop cutout that left too little structural margin, or an unsupported span under a bar.
- Delamination at a glued seam. Adhesive failure that shows as a fine line that catches a fingernail. Left alone, it widens as the season shifts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For an ADU or addition, the relevant costs are the surface and the structure around it. Countertop installation runs $2,000 – $6,500, and a kitchen island installation $3,000 – $10,000 – each covering slab, fabricator labor, cutouts, and edge finishing. If the failing surface is part of a larger kitchen in the new space, a full kitchen remodel on the addition runs $14,000 – $45,000, and a bathroom remodel $9,000 – $28,000. What drives the number: slab series and thickness, number of seams, edge profile, and whether the substrate needs correcting. Every price is written before work starts; the number on the quote is the number on the invoice. The 365-Day Done Right Promise backs the work in writing – if it fails inside the year, we return and fix it at no charge.
A word on hiring out to a handyman: the safety concern isn’t dramatic, it’s mechanical. Quartz slabs are heavy. A two-person install of a 30mm counter without the right support blocks, lifting gear, or adhesive can injure backs and hands or flex a slab before it’s set. That’s a professional’s job. This is also why we work only through trained fabricators on Caesarstone, Cambria, and Silestone surfaces.
What a Buyer Can Check vs. What to Leave Alone
You can safely do a few things yourself: photograph the engraved slab label and any series code, measure the thickness and overhangs with a tape, and note where the failure starts – seam, edge, or cutout. That information is what saves time on a quote call. Leave alone anything requiring lifting, cutting, or prying. That includes slab removal, seam injection, and substrate repair; a wrong cut or bad pry cracks the slab and can drop it. What’s genuinely doable is the documentation and a clear description of the symptom, so our estimator arrives with the right expectations.
When you’re ready, call our Long Beach team at (833) 510-6967. A live person answers 24/7, and your free estimate is scheduled with a real arrival window.
FAQs

Fifteen to twenty years with correct substrate and a sealed seam, and often longer if the fabricator did the cutouts right. In Long Beach’s humidity and salt air, the failures you see sooner are at seams and exposed edges, not the slab itself. If a seam starts catching a fingernail, get it looked at before the next season shift. Call (833) 510-6967 for a free seam inspection and a written price.
Sometimes. A fine chip can be color-matched and filled; a short seam gap can be re-adhered. A crack that runs through a cutout or a slab that’s flexing underneath can’t be reliably repaired, only replaced – we’ll tell you honestly which you have. Our written quote states whether the repair is covered by our 365-Day Done Right Promise, so if it fails inside that year we return at no charge.
The swap itself is typically one to two days for a countertop; the lead time is in fabrication, usually two to three weeks from template to install. If we’re correcting the substrate first, add a day. You get the written timeline with your estimate.
We identify the series from the slab label and engraved underside, then source matched stock from trade suppliers – never a guessed visual match. The fabrication is handled by trained fabricators who work with Caesarstone, Cambria, and Silestone, and our technicians have up to 22 years of experience. You get the material specification in writing before work starts. Call (833) 510-6967 to schedule a free estimate.
Written by the team at Penhallow Remodeling Long Beach.












