A Penhallow company - serving Long Beach, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Long Beach

Moen Roofing in Long Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled primary suite with built-in wardrobes and a window seat
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Roofing: The Long Beach Owner’s Guide

Moen makes the plumbing fixtures, not the roof over them, so a homeowner searching for “Moen roofing” is usually looking at flashing and vent penetrations around a Moen shower vent, a Moen tub spout on an upper-floor bathroom, or a bath fan termination on the roof deck. Roof repair around those penetrations in Long Beach typically runs $400 – $1,800, and a full roof replacement runs $8,000 – $20,000 depending on square footage, pitch and whether the old layers get torn off. We schedule estimates within a normal arrival window; planned roof work is not a same-day job, and anyone who tells you otherwise is selling you something.

Call (833) 510-6967

Most owners find the problem after a Santa Ana wind event or the first real rain of the season. A brown ring appears on the ceiling below an upstairs bathroom. Granules start collecting in the gutter. A Moen shower valve gets blamed for a leak when the water is actually coming through a failed boot around the exhaust vent four feet away. We’ve made that diagnosis in Bixby Knolls, in Belmont Shore bungalows with original 1940s framing, and in the newer three-story builds near Downtown where the roof deck is tight and the penetrations sit close together.

One thing to say plainly up front: we’re an independent remodeling company, not affiliated with Moen. We install and repair the roofing and venting around Moen fixtures, and we install Moen, Kohler, Delta and Grohe fixtures in the bathrooms underneath. That’s the whole relationship.

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen doesn’t publish a “roofing” line, so there’s no model number on a box to match. What you’re matching is the roof penetration tied to a Moen installation. The common cases:

  • Upper-floor Moen shower or tub installations where the vent stack or fixture penetration passes through the roof deck. The roof boot, collar and flashing around that stack is what fails, not the valve.
  • Moen bath fan terminations on the roof surface, where the hood or damper assembly has cracked or the seal has dried out.
  • Moen-equipped second-story bathroom remodels in older Long Beach homes where the roof was never re-flashed after the bathroom was reconfigured.

How to identify what you’re actually replacing

Go up in the attic, not on the roof, first. Look for a wet or stained area on the sheathing and trace it up. Measure the diameter of the pipe passing through the deck: standard vent stacks run 1.5″, 2″ or 3″. The boot or collar sized for that diameter is the part. On the roof side, the pitch of your roof determines the flashing style, and Long Beach roofs range from nearly flat on mid-century carports and additions to steep on the 1920s Craftsman stock in Rose Park and Bluff Heights. A flashing made for a 4/12 pitch will not seat correctly on a 9/12 roof, and that mismatch is one of the most common causes of repeat leaks we get called back on.

OEM vs. aftermarket flashing

For the roof-side parts, aftermarket is generally fine. Quality EPDM and silicone boots from recognized manufacturers hold up as well as anything branded, and the price difference is small. What matters more than the brand is the material: standard neoprene boots degrade noticeably faster under Long Beach’s UV load than silicone boots do. If you’re paying someone to climb up there, the silicone version is worth the extra few dollars. On the Moen fixture side, use Moen genuine parts when a cartridge or trim piece is the issue, because aftermarket cartridges are the single most frequent cause of the “fixed it and it broke again” callback.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Roofing Is Failing

  • Ceiling stains below an upstairs Moen bathroom. Water tracking along the sheathing from a failed vent boot lands several feet from the actual leak, so the stain location and the leak location are rarely the same spot.
  • Granules in the gutter or at the downspout outlet. Granule loss is normal aging, but sudden heavy shedding after a hot summer points to a roof surface near the end of its service life. Asphalt shingles in Long Beach’s coastal sun and salt air commonly give 15 – 20 years where a shaded inland roof might run longer.
  • Daylight visible in the attic. A pinhole of light along the roof deck is a failed flashing or a lifted nail. This one is worth checking before the rainy season, not after.
  • Cracked or missing vent boots and collars. Rubber boots crack from UV exposure and heat cycling. A cracked boot lets water in along the pipe, and the leak shows up as a wet patch on the bathroom ceiling below.
  • Water staining or soft spots around the Moen valve wall from above. If the wall behind the shower valve is wet from the top down, the roof above the penetration is the first thing to check, not the valve body.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Installed pricing in Long Beach for the work that actually addresses a Moen-related roof problem:

Job Typical installed range
Roof repair (flashing, boots, isolated shingles) $400 – $1,800
Tile roof repair $600 – $2,500
Roof replacement (asphalt shingle) $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the number: the size and pitch of the roof, how many layers have to come off, sheathing condition, whether the attic is accessible, and material choice. A simple flashed-boot replacement on an accessible roof sits at the bottom of the repair range. A tear-off on a steep, multi-plane roof over a 1920s Long Beach home with original sheathing sits at the top of the replacement range.

You get a written price before any work starts: a line-item number for the repair or the replacement, not a verbal range. That number doesn’t move once we’ve taken a look, and it doesn’t move when the crew finds a soft panel or a rotted fascia, because we quote those contingencies up front. Every job comes with a written guarantee and the 365-Day Done Right Promise. If the repair fails inside that year, we come back and fix it at no charge, and there’s no service-call fee or re-inspection fee for that return visit.

DIY or Call Us?

Here’s an honest split of what’s reasonable and what isn’t. In the attic, on your feet, with a flashlight: check for water staining, look for daylight, and photograph the underside of the roof deck. That’s safe, and it tells you a lot about the scale of the problem. On the roof is a different story. Ladder work on a two-story Long Beach home, walking a pitched roof, cutting and fitting flashing around a vent stack, and getting the shingle course to seal back down correctly are all jobs where the failure mode is either a fall or a leak that shows up the next time it rains. We see plenty of both. If the roof is more than one story up or steeper than a walkable pitch, stay off it.

One more honest note: the Moen cartridge swap that homeowners often assume is the culprit is itself a job to be careful with, because accessing a cartridge set inside a wall or behind a trim can lead to damaging finishes or the valve body if the wrong tool is used or the trim isn’t seated back correctly. The roof-side fix and the fixture fix are different trades. If both are in play, we’d rather look at it once and tell you which one you’re actually dealing with. Call (833) 510-6967 to set up a free estimate, and a real person will pick up.

FAQs

A built-in window seat in a bay window

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
New painted shaker cabinets with an organized deep drawerA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA dining nook with a built-in banquette

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-6967
Local Service Coverage

Request a Free Estimate in Long Beach

Tell us what you need - Penhallow Remodeling Long Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch