A Penhallow company - serving Long Beach, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Long Beach

Moen Home Additions & ADU in Long Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled primary suite with built-in wardrobes and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Home Additions & ADU: The Long Beach Owner’s Guide

If you’re planning a home addition or ADU and want Moen fixtures specified from the start, expect a Long Beach home addition to run $45,000 – $130,000 and an ADU to land between $90,000 – $220,000, depending on size, foundation work, and how the plumbing is routed. Additions and ADUs aren’t same-day work, and anyone who tells you otherwise is selling you something. What we do is put a written price in front of you before the first permit is pulled, so the number on day one is the number on your invoice.

Call (833) 510-6967

Most Long Beach owners don’t land on this page because a Moen part failed. They land here because they’re deciding which fixtures to put into a new bathroom or kitchenette and want to know whether Moen holds up in a coastal climate. That’s the real question, and we’ll answer it plainly. Moen’s ceramic cartridge and 1222/1225-style valve lines are among the most repairable fixtures on the market, which matters when the fixture lives in a back addition where access is tight. We install Moen alongside Kohler, and we source countertops and cabinetry from KraftMaid, Cambria, and Silestone, so a new addition gets coherent hardware and finishes, not a mismatched set pieced together from three different supply runs.

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen faucets and shower valves fall into a handful of cartridge families, and knowing which one you have tells you what replacement parts will fit and how accessible the repair is down the road. The most common in residential additions are the 1222 and 1225 single-handle cartridges (used across the Chateau, Adler, and Banbury lines), the 4000-series for two-handle configurations, and the Posi-Temp pressure-balancing valve found in most newer shower builds. If your addition calls for a thermostatic or transfer valve, that’s a 3- or 6-function M-CORE or ExactTemp setup, and those need to be planned into the rough-in, not retrofitted later.

To identify what you have, pull the handle and look for a stamped number on the cartridge retaining nut. Most Moen cartridges carry a small white or brass tag with the model number. If you can’t read it, a photo of the valve body plus a measurement of the cartridge diameter (most single-handle units run just under 2 inches) gets you a match. On the OEM-versus-aftermarket question: Moen’s own cartridges carry a limited lifetime warranty against leaks and drips for the original purchaser, which is a real advantage in a new addition where you plan to stay. Third-party equivalents cost less up front but usually void that coverage and can differ a few thousandths of an inch in bore diameter, enough to cause a slow drip at the bonnet. In a fixture buried behind tile, we specify OEM and don’t think twice about it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Home Additions & ADU Is Failing

Here’s what a Moen install that’s aging badly actually looks like. Each of these traces to a specific cause, not bad luck.

  • A drip from the spout that won’t stop. The cartridge seal has worn or mineral has built up on the ceramic disc. In Long Beach’s hard water (our supply runs roughly 10 – 14 grains per gallon depending on the zone), this happens faster than most owners expect, often within three to five years on a heavily used kitchen faucet.
  • Water that won’t get hot enough, or scalds when a toilet flushes. A failed pressure-balancing spool in the Posi-Temp valve. The valve is designed to hold temperature steady; when the spool sticks, you lose that protection and get temperature swings.
  • Low flow at one fixture only. Usually a clogged aerator or a failing cartridge restricting the port, not a supply-line problem. A quick pressure check at the nearest hose bib confirms whether the rest of the house is fine.
  • Water staining at the base of the valve or along the shower wall. A failed O-ring or a loose bonnet nut letting water weep behind the tile. This is the one to take seriously, because a slow leak inside a new addition’s wall cavity can rot framing before you ever see a drip on the floor.
  • Handle that’s stiff or won’t return to center. Cartridge binding from mineral scale or a worn spring. Left alone, the extra torque eventually cracks the handle or strips the stem.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

For Long Beach homeowners, a faucet cartridge replacement or valve repair typically runs $180 – $420 installed, depending on access and whether trim has to come off. A full shower valve replacement, including opening and re-closing the wall, lands around $600 – $1,400. If you’re planning the addition itself, the project numbers are $45,000 – $130,000 for a home addition and $90,000 – $220,000 for an ADU; a garage conversion runs $30,000 – $80,000. Those ranges reflect square footage, foundation and grading, permit and inspection fees with the City of Long Beach, and fixture and finish selections.

What drives the range up: second-story framing, structural reinforcement in older Long Beach homes, and upgraded plumbing rough-in for multiple valve locations. What keeps it down: building on an existing slab and keeping fixtures on shared wet walls.

Every repair and every project comes with a written price before any work starts, and a written guarantee on the work itself. If a repair fails inside the 365-Day Done Right Promise, we come back and fix it at no charge, including the free return visit, no re-inspection fee. Parts are sourced from Moen directly or through authorized distribution, and we’ll show you the part number and receipt on request.

DIY or Call Us?

There’s a real split here, and it’s worth being honest about which side you’re on. You can safely identify your Moen model, check the aerator for debris, confirm supply pressure at an outdoor spigot, and even swap an accessible cartridge on a kitchen faucet if you shut the water off first and have the right puller tool. Plenty of homeowners do exactly that, and we don’t talk anyone out of a $30 repair they can handle.

Where it goes wrong: shower valve work inside a wall, anything involving the pressure-balancing spool, and any repair where you’re chasing a leak you can’t see. Opening a finished wall in a new addition to fix a valve is a different job than swapping a cartridge, and if you’re not certain the leak stopped, you’ll be doing it twice. There’s no high-tension or electrical hazard in a Moen fixture, but there is a moisture hazard, and moisture behind drywall is where the expensive damage lives. If you’re not sure, call (833) 510-6967 and we’ll help you decide whether it’s a parts swap or a repair. A live person answers around the clock, and estimates are free.

FAQs

A finished backyard cottage with a small covered porch

How long does a Moen faucet or valve last in Long Beach? Most Moen cartridges last five to ten years in Long Beach’s water, and pressure-balancing valves typically go eight to twelve before they need attention, though hard water on the east side of town shortens that. Routine cartridge swaps keep the faucet body going for decades. Call (833) 510-6967 if you want us to assess yours; estimates are free.

Can the part be repaired instead of replaced? Yes, often. A dripping faucet is usually a cartridge-and-seal kit, not a whole fixture, and that runs far less than replacing the valve. If the valve body itself is cracked or the trim is obsolete, replacement makes more sense than repair. Call (833) 510-6967 and we’ll give you a written number either way.

How long does a cartridge or valve swap take? A faucet cartridge swap is a same-visit job, usually under an hour once we’ve confirmed the model. A valve replacement inside a wall is a half-day job, because we open the wall, swap the valve, pressure-test, close it up, and patch. We schedule a defined arrival window and stick to it.

How do you source the part? We order Moen OEM cartridges and valves through authorized channels and match the part number to your model before we arrive, so there’s no second trip. If a part is back-ordered, we tell you the lead time before you commit. Call (833) 510-6967 to get your model identified and your free estimate scheduled.

Key Takeaways:

  • Home additions in Long Beach run $45,000 – $130,000; ADUs run $90,000 – $220,000.
  • Moen 1222 and 1225 cartridges and Posi-Temp valves are the most common in residential additions and the most repairable.
  • Hard water shortens cartridge life in Long Beach; routine swaps are cheap and keep the fixture body intact.
  • Every project comes with a written price before work starts and a 365-Day Done Right Promise.
  • Penhallow Remodeling Long Beach is an independent contractor and is not affiliated with Moen.

If you’re planning an addition or an ADU and want the fixtures and finishes specified correctly from the start, or you’ve got a Moen valve that’s giving you trouble, call (833) 510-6967 for a free estimate. A real person answers 24/7, we give you a written price before any work starts, and we stand behind the work with the 365-Day Done Right Promise.

Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
New painted shaker cabinets with an organized deep drawerA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled living room with built-in shelves around the fireplace

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-6967
Local Service Coverage

Request a Free Estimate in Long Beach

Tell us what you need - Penhallow Remodeling Long Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch