







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Roofing: The Long Beach Owner’s Guide
Schluter doesn’t make roofing shingles, and that’s the first thing to get straight. Schluter Systems makes the underlayment, edge profiles, drainage mats, and waterproofing layers that sit beneath a tile roof or on a low-slope deck. If you’re searching for “Schluter roofing” in Long Beach, you’re usually dealing with a failing roof detail, not a door or spring: a cracked tile field over failing underlayment, water tracking under a Schluter edge profile, or a drainage mat that has clogged and backed water up into the sheathing. Full roof replacement in Long Beach runs $8,000 – $20,000; a focused repair to a Schluter-based assembly typically lands between $400 and $1,800, and we can usually get an estimate scheduled within a day or two. We install and repair Schluter-compatible roof assemblies as an independent contractor; we’re not affiliated with Schluter Systems.
Which Schluter Models This Applies To

Schluter’s roofing side centers on a few product families, and knowing which one is under your roof changes what a fix looks like. Schluter-DITRA-DRAIN is the bonded drainage mat used over waterproofing on balconies and low-slope decks. Schluter-KERDI is the sheet waterproofing membrane. Schluter-DILEX and the TREP and FINEC edge profiles handle movement joints and tile edges at roof-to-wall transitions. If you have a tile roof or a walkable deck, there’s a good chance one or more of these is part of the assembly.
To identify what you’ve got, look for printed product codes on the membrane selvage or edge trim (DITRA-DRAIN has a visible grid and a fleece back), measure the roll width and thickness, and photograph any transition where tile meets flashing or a wall. Those photos plus the tile profile let us match the right Schluter system. On OEM versus aftermarket: for the membranes and drainage mats, use the actual Schluter system. An imitation mat may not bond or drain the same way and can void the manufacturer warranty with no savings worth the risk. For edge profiles, a compatible stainless profile is a fair aftermarket call, but only after we confirm the leg height and finish match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Roofing Is Failing
- Water stains on the ceiling below a tile deck or balcony. This usually means the KERDI membrane has a breach or the DITRA-DRAIN mat is clogged and water is wicking sideways under the tile.
- Tiles that sound hollow or lift at the edge. Hollow tile over a Schluter assembly often points to a failed bond or a mat that stopped draining, so the setting bed stayed wet.
- Green or black growth in the grout and profile joints. Persistent growth that returns after cleaning usually isn’t a cleaning problem; it’s trapped moisture under the tile over a backed-up drainage layer.
- Cracked or separated edge profiles. A failed Schluter edge trim lets water slip behind the tile edge, and that water tracks toward the wall and sheathing.
- Moldy smell or soft spots in an attached soffit or framing. This is the late-stage symptom: long-term moisture has reached framing, and the job shifts from cosmetic to structural.
Replacement Cost & What’s Included

For Long Beach, a focused repair to a Schluter-based tile or deck assembly typically runs $400 – $1,800, and a full roof replacement with the underlayment and drainage detail done correctly runs $8,000 – $20,000. Tile roof repair specifically lands $600 – $2,500 when the work involves re-setting tile and renewing membrane. The range is driven by how much square footage failed, whether the fix is membrane-only or includes re-setting tile, and whether the flashings and edge profiles need replacing too. Every price is written before we start, with parts and labor broken out, so you can see exactly what the membrane, the mat, and the labor each cost.
Every repair carries our 365-Day Done Right Promise, backed in writing. If the same area fails inside the year, we come back at no charge, and the return visit has no service call or re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do a few checks yourself. Look for the product code on any exposed membrane or edge trim, photograph the transition points where tile meets wall or flashing, and note whether the leak tracks to one area or spreads. What you shouldn’t do is pull tiles and cut into the membrane to “see what’s under there.” A Schluter assembly depends on continuous bonding at every seam and edge; one opened seam that isn’t reinstated correctly becomes a new leak point. Roofs also mean height and fall risk. If water is reaching framing or the assembly has failed over more than a small patch, that’s a job for background-checked, uniformed technicians who know how to re-lay the membrane and re-set tile to manufacturer spec. Call (833) 510-6967 and we’ll schedule a free estimate.
FAQs

How long does a Schluter roof assembly last in Long Beach? A correctly installed membrane and drainage layer can serve 20 – 30 years, but Long Beach’s marine air, salt, and winter rain cycles stress it faster; assemblies that don’t drain properly fail in 10 – 15 years. If yours is older than that and leaking, it’s worth a look. Call (833) 510-6967 for a free assessment.
Can it be repaired instead of replaced? Often, yes. Small membrane breaches and localized drainage clogs can be repaired without touching the whole roof, which is why the repair range stays at $400 – $1,800. We tell you when a repair is the right call and when it’s throwing money at a failing system. Call (833) 510-6967 for a free estimate.
How long does the swap or repair take? A localized repair is usually a one-to-two-day job; a full re-cover or roof replacement runs several days depending on square footage and weather. We give you a written schedule and arrival window before work starts. Call (833) 510-6967 for a free estimate.
How do you source the part? We source genuine Schluter membranes, drainage mats, and edge profiles from licensed supply channels so the manufacturer warranty stays intact, and we confirm compatibility against your existing assembly before ordering. If you’ve been comparing cabinetry names, this is a different category: Schluter handles the roof layer, while for kitchens and baths we work with KraftMaid, Cambria, and Silestone. Call (833) 510-6967 and we’ll walk you through options.
Get Your Free Estimate
If your Schluter-based roof or deck assembly is leaking, clogged, or failing around Long Beach, call Penhallow Remodeling at (833) 510-6967. You’ll get a written price before any work begins, a real arrival window, and a written guarantee on the repair. A live person answers the phone day or night, and we’re ready to schedule your free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












