







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Long Beach Owner’s Guide
Boral makes clay and concrete roof tiles, and the parts that fail most are the ones you rarely see from the street: field tiles, ridge and hip caps, eave closures, and the underlayment beneath them. In Long Beach, roof repairs run $400 – $1,800 for isolated damage and full roof replacement runs $8,000 – $20,000, depending on tile type, square footage, and how much of the underlayment has to come up. We install and repair Boral-compatible roofing and can usually get an estimator out within a few days.
Most Long Beach owners find out something’s wrong the same way. A tile slides loose after a windy night. A brown stain creeps across a bedroom ceiling after the first real rain of the season. Or a roofer up for an unrelated job points at a cracked ridge cap and says, “That’s been like that a while.” Boral tile itself holds up for decades. The pieces around it, and the layer underneath, are what age first.
Key takeaways:
- Boral field tile rarely fails; caps, closures, and underlayment do.
- Long Beach salt air and marine moisture shorten underlayment life compared to inland installs.
- Spot repairs run $400 – $1,800; full replacement $8,000 – $20,000.
- We’re an independent contractor, not affiliated with Boral, and we source matching tile by profile and color.
Which Boral Models This Applies To

Boral’s roof line splits into two families: clay tile (including its flat and barrel profiles) and concrete tile (including the low-profile and barrel-look lines). Each profile has its own dimensions, and that’s where matching gets tricky. A barrel field tile from one profile won’t interlock cleanly with another, and a cap that’s close but not exact will sit proud or leave a gap at the ridge. Get the profile wrong and you’ll see it from the driveway.
To identify what you have, start on the roof only if it’s safe to look from a window or with binoculars. Check the underside of an eave tile for a stamp or the back of a loose field tile for a manufacturer mark. Measure a single tile’s width and length, note whether it’s barrel (curved) or flat, and photograph the ridge detail. Those four things narrow the Boral line fast.
On the OEM-versus-aftermarket question: for Boral specifically, matching the original profile matters more than matching the brand. A correct-profile tile from a quality maker will weather in alongside your existing roof; a wrong-profile Boral tile won’t. We source to the profile, and when we can’t find an exact current match, we tell you before ordering rather than after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile is a long-lived product, but the system around it isn’t. Here’s what actually goes wrong, and why:
- Cracked or slipped field tiles. Thermal cycling and foot traffic from a past repair loosen tiles over time. A slipped tile lets water straight to the underlayment, which is the real problem.
- Crumbling or missing ridge and hip caps. The mortar or mechanical fasteners holding caps break down faster than the field. Once a cap lifts, wind gets under it and the next one goes.
- Ceiling stains after rain. Water is getting past the tile layer and through failed underlayment. Tile sheds most water, but it isn’t the waterproof layer; the felt or membrane beneath it is.
- Granule or surface erosion on concrete tile. Concrete tile in coastal air slowly loses its surface finish. It’s cosmetic until the tile turns porous and starts holding moisture.
- Loose or missing eave closures and bird stops. Small parts, real consequences. Missing closures let wind-driven rain and pests into the eave, and they’re among the cheapest things to fix before they cause damage.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for Long Beach roofs:
| Scope | Typical installed range |
|---|---|
| Roof repair (isolated tiles, caps, closures) | $400 – $1,800 |
| Tile roof repair (larger sections, underlayment patches) | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation (if you’re re-roofing entirely) | $15,000 – $40,000 |
What moves the number: roof pitch and height, how many tile courses have to come up to reach the underlayment, whether matching tile is in stock or has to be ordered, and whether the repair is one isolated spot or scattered across several planes.
Every quote we write is line-item: parts, labor, disposal, and any underlayment work, priced separately. The number on day one is the number on the invoice. And every job carries our 365-Day Done Right Promise in writing, plus a free return visit if a repair fails. No service-call fee, no re-inspection charge.
DIY or Call Us?
What you can safely check from the ground or a window: whether tiles are visibly slipped or missing, whether a ceiling stain is spreading, and whether you can read a stamp on a loose tile you can reach without climbing. Photograph what you see. That’s genuinely useful.
Where DIY goes wrong: getting up on a tile roof. Tiles are brittle, they crack under a foot placed wrong, and a cracked tile is a leak waiting for the next rain. Working at height on a pitched roof is the real danger here, so we’d rather you didn’t. Leave the roof itself to us. Call (833) 510-6967 and we’ll take a look.
FAQs

How long does Boral roof tile last in Long Beach? Boral clay and concrete tile itself commonly lasts 50 years or more, but the underlayment beneath it typically lasts 20 – 30 years. In Long Beach, marine air and salt exposure tend to shorten that underlayment life, which is why the tile can look fine while the roof is already leaking.
Can my Boral roofing be repaired instead of replaced? Often, yes. Isolated cracked tiles, loose ridge caps, and missing eave closures are straightforward spot repairs. Once several areas or the underlayment are involved, replacement becomes the better value. Call (833) 510-6967 for a free estimate and an honest read on which you’re facing.
How long does a tile or cap swap take? A single-tile or small-area repair usually takes a few hours. A larger repair touching several ridge caps or underlayment sections is typically a one- to two-day job. We give you a real arrival window and hold to it.
How do you source the right Boral tile? We match by profile, dimensions, and color, using manufacturer marks and measurements when the exact line is unclear. When an exact current match isn’t available, we tell you what we found and what the closest correct-profile option is before anything is ordered. We also install KraftMaid, Cambria, and Silestone products when your project reaches inside the house.
Ready to stop guessing? Call (833) 510-6967 for a free estimate. A live person answers around the clock, and we’ll put a written price in front of you before any work starts, backed by the 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












