







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Long Beach Owner’s Guide
We install and replace PGT windows and doors for Long Beach homeowners, and most full window replacement jobs in this city land between $4,500 and $15,000 installed, with impact-rated units running $8,000 to $25,000 depending on count, series and glass package. If it’s a single failed component – a balancer, a roller, a weatherstrip seal, a lock – we source the matching part and get it out to you, and we’ll tell you up front whether that part fix is worth doing or whether you’re throwing money at a window that’s already past its service life.
Long Beach owners usually find us the same way. A bedroom window in Belmont Shore suddenly won’t stay up. A slider in Bixby Knolls starts grinding halfway through the track. Salt air off the water has chewed through the weatherstripping on the ocean side of a Naples canal home, and now the thing whistles in a Santa Ana. Or a single-hung in Lakewood won’t latch and the sash rattles every time the door slams. These are part failures, not window failures, and they’re worth pricing honestly before you decide.
Which PGT Models This Applies To

PGT is a Florida-based manufacturer, and its windows show up all over Southern California, most often the WinGuard impact line, the EnergyVue series, and older PremierVue and Aluminum series units that have been in Long Beach homes for a couple of decades. Parts are not universal across those lines. A balance assembly for one series will not fit another, and PGT has changed sash dimensions and hardware suppliers over the years, which is exactly where homeowners get burned buying a part online that “looks right.”
The reliable way to identify your unit is to read the etching on the bottom corner of the glass, then cross-check the series label on the sash edge or the frame jamb, and measure the actual sash and balance length with a tape. Do not trust the model number on an old sticker alone. On the OEM-versus-aftermarket call: for balances, rollers, tilt latches and locks, a quality aftermarket equivalent from a U.S. hardware supplier is often as good as the factory part and available faster. For the glass unit itself and for anything on a WinGuard impact-rated window, we stay with OEM-spec or better, because the impact rating and the warranty depend on the specific assembly.
One note we want to be clear about: Penhallow Remodeling Long Beach is an independent service provider. We’re not affiliated with PGT, and we’re not an authorized PGT parts dealer. We identify the part you need and source it from suppliers who carry it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Windows & Doors Is Failing
Most of what goes wrong on a PGT window is mechanical or seal-related, and the symptom tells you which. Here’s what we see and what’s behind it:
- Sash won’t stay open, or slams down. The balance assembly has lost tension or the cord has snapped. On a single-hung or double-hung, the balance is the spring mechanism that holds the sash up, and once it goes, no amount of fiddling fixes it.
- Slider drags or grinds in the track. Usually a worn or flat-spotted roller, or debris and oxidized aluminum in the track. Salt air in Long Beach accelerates the oxidation, so coastal sliders wear faster than inland ones.
- Draft, whistle or water at the edges. The weatherstripping or the glazing seal has failed. On a 15-year-old unit near the water, the pile seal and bulb seal are often both gone and the sash is no longer sealing against the jamb.
- Fogging or a haze between the panes. The insulated glass unit’s seal has broken and moisture has entered. The glass itself has to be replaced; there’s no part fix for a failed IGU.
- Latch won’t catch or the lock turns but won’t engage. A worn lock, keeper or tilt latch. Sometimes the sash is out of square rather than the hardware being bad, and that’s a different repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers fall in Long Beach, and what we’re actually quoting when we give them to you:
| Job | Installed range |
|---|---|
| Single component repair (balance, roller, latch, lock, weatherstrip) | Priced per part plus labor; call for the number |
| Window replacement (whole unit) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: how many openings, the series and glass package, whether it’s impact-rated, and whether the frame is sound or the opening needs work. Parts-plus-labor is transparent on our quotes. We write the price before any work starts, so the number on day one is the number on the invoice. Every job carries our 365-Day Done Right Promise, and if the work fails inside that window, we come back and fix it at no charge.
DIY or Call Us?
Some checks are safe and worth doing yourself. You can read the glass etching for the model, measure the sash and balance length, clean and inspect the track, look at whether the weatherstripping is cracked or flattened, and see if the sash sits square in the frame. That information makes the phone call shorter and the part order right the first time.
Where DIY goes wrong: ordering a balance or roller that doesn’t match the series, forcing a sash that’s out of square, or prying a tilt latch and cracking the sash. On impact-rated units, the assembly has to stay intact for the rating to mean anything, and that’s not a project to improvise. If you’re not sure which part you have, call us at (833) 510-6967. We’ll help you identify it and give you a written price before anything starts.
FAQs

Plan on 15 to 25 years for the window itself, with the moving parts wearing out sooner. Balances, rollers, weatherstripping and locks typically need attention in the 8-to-15-year range, and salt air near the water pushes that toward the shorter end because oxidation and UV break down seals faster. Call (833) 510-6967 for a written price on a repair or replacement.
Often yes. A broken balance, a worn roller, a bad latch, failed weatherstripping or a lock can be repaired, and that’s frequently the right call on a sound frame. A fogged insulated glass unit is the exception where you’re replacing the glass, and if the frame is rotten or the sash is out of square, replacement is the honest answer. Call us for a free estimate and we’ll tell you which one you’re looking at.
A single component repair is typically a short visit, often same day to a couple of days depending on whether the part has to be ordered. A whole-window replacement depends on the number of openings and whether the frame needs work, and we’ll give you a real arrival window and a written timeline before we start. Call (833) 510-6967 to schedule your free estimate.
We identify the series from the glass etching and the sash label, measure the sash and balance, and order the matching OEM or OEM-equivalent part from suppliers who carry PGT hardware. For impact-rated units we stay with OEM-spec glass and components so the rating holds. We don’t claim to stock parts or carry them on a truck; we source what your window actually needs. Call (833) 510-6967 and we’ll get the right part in front of you.
If a PGT window or door in your Long Beach home has a failed part, the fastest way to a straight answer is a free estimate. We write the price down before any work starts, we arrive in the window we gave you, and every repair carries our 365-Day Done Right Promise. Our technicians have up to 22 years of experience, and we also work with KraftMaid, Cambria and Silestone on the larger remodeling projects homeowners ask us about alongside their window work. Call Penhallow Remodeling Long Beach at (833) 510-6967 to schedule your free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












