







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Long Beach Owner’s Guide
When a PGT window or door component fails inside a Long Beach addition or ADU, repairs are rarely a parts-counter swap – the replacement has to match the exact series, glass package, and rough opening of your unit. Most failures show up as fogged insulated glass, a door that drags or won’t latch, water staining on the interior trim after a storm, or a moving panel that suddenly needs two hands. Price depends on the scope: a single component replacement can run a few hundred dollars, while a full addition build in Long Beach runs $45,000 – $130,000 and an ADU runs $90,000 – $220,000. The part you’re chasing is almost always tied to the whole assembly, which is why we check the unit’s label before quoting anything.
Which PGT Models This Applies To

PGT makes several lines that land in Southern California additions and accessory dwelling units: WinGuard aluminum impact products, aluminum series sliders and single-hungs, vinyl new-construction windows, and the vinyl replacement lines. The label is the key. Look on the top or side of the sash, or inside the head jamb of a slider, for a sticker with the series, size code, glass package, and date of manufacture. That sticker tells us whether your unit is impact-rated, what glass makeup it carries, and which hardware and screen track it takes.
The compatibility gotcha in Long Beach: an impact-rated PGT unit and a non-impact unit of the same nominal size do not share glass, sash, or lock hardware. A standard-weight sash won’t sit in an impact frame correctly, and the wrong lock set won’t pull the panels tight against the weather seal. On OEM versus aftermarket, we go OEM where the part must match a structural or impact rating – sash, frame, glass – and quality aftermarket for wear items like rollers, weatherstrip, and screen frames, where a well-made equivalent does the same job for less. Any glazing replacement on an impact unit needs the correct rated glass; a plain pane voids the rating. We’re an independent service provider, not affiliated with PGT, so we source by part number rather than brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
- Fogged or hazy glass. The insulated seal has failed and moisture is between the panes. This is common in Long Beach units facing the marine layer, where daily temperature swings stress the edge seal.
- Water staining on interior trim or drywall near a window or door. A failed perimeter seal or blocked weep path. Left alone, it rots the framing and the cement board behind the finish.
- A slider or door that drags, sticks, or won’t latch. Worn rollers, a settled frame, or a worn lock. On an impact slider, a dragging panel can mean the panel weight has overloaded the track.
- Sash that won’t stay up, or hardware that feels loose. Failed balances or stripped hardware screws. The sash can drop without warning.
- Drafts, condensation, or visible daylight at the frame. Weatherstrip or sealant has aged out. Coastal humidity finds every gap, and this is one of the most common calls we get in Long Beach additions.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a PGT unit inside a Long Beach addition or ADU, single-component work – rollers, hardware, weatherstrip, screen – typically runs $250 – $900 installed. Sash or glass replacement on an insulated or impact unit runs $600 – $1,800 per unit depending on size and rating. Where a failing window or door is part of a broader addition scope, the full build sits at $45,000 – $130,000 for a home addition and $90,000 – $220,000 for an ADU in this market. What drives the range: unit size, whether the glass is impact-rated, OEM versus quality aftermarket parts, and access to the opening.
Every quote is written before work starts, with the part number, the labor, and the guarantee spelled out. If a part fails inside the guarantee period, we come back and fix it at no charge under our 365-Day Done Right Promise. We install recognized trade brands on the build side too – KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone countertops – so the materials behind the guarantee hold up the same way the PGT factory parts do.
DIY or Call Us?
You can safely check a few things yourself: read the PGT label and write down the series and size code, run a finger along the weatherstrip to feel for gaps, and test the lock and latch with the panel closed. What we’d steer you away from is glass replacement on an insulated or impact unit, sash removal on a heavy slider, and any repair that requires lifting a panel out of its track. Those carry real injury risk from a dropped sash or shattered glass, and a wrong-pane install voids an impact rating. Call (833) 510-6967 and we’ll tell you over the phone whether it’s a wear item or a full sash. Estimates are free.
FAQs

How long does a PGT window or door last in Long Beach? Figure 15 – 25 years for the frame, with glass edge seals and moving hardware often aging out sooner in coastal air. Long Beach humidity and marine-layer temperature swings are hard on edge seals, so fogged insulated glass is the first thing most owners notice.
Can a failing PGT unit be repaired instead of replaced? Often yes. Worn rollers, hardware, weatherstrip, and a single fogged pane can be swapped without replacing the whole unit. Structural damage to the frame or sash usually points to replacement. Call (833) 510-6967 and we’ll tell you which one your unit is.
How long does the swap take? A hardware or weatherstrip repair is usually a single visit of a few hours. Glass or sash replacement takes a bit longer, since the correct rated pane has to be sourced by part number. We give you a real arrival window, not a vague range, and honor it.
How do you source the right PGT part? By part number off your unit’s label, not by eyeballing the size. We pull OEM parts where the rating and fit demand it and quality aftermarket for wear items, and we tell you which we’re using before the work starts.
If you have a PGT window or door in a Long Beach addition or ADU that’s fogged, dragging, or leaking, a written quote takes one phone call. Call (833) 510-6967 for a free estimate and we’ll match the part to your unit before any work begins.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












