







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Long Beach Owner’s Guide
We handle Mr-Glass bathroom remodeling projects in Long Beach, and a complete bathroom remodel typically runs $9,000 – $28,000 depending on the size of the room, the shower or tub configuration, and the finish level you choose. We give you a written price before any work starts, so the number on day one is the number on the invoice. For a failing fixture or part, we can often look at it within a day or two of your call. Call (833) 510-6967 and a real person picks up, any hour.
Most Long Beach homeowners don’t go looking for a Mr-Glass resource until something stops working. A shower door that won’t stay shut. A frame that’s pulling away from the tile. A seal that’s been letting water behind the wall for a year and only shows up as a soft spot underfoot. The brand on the fixture tells you what will fit; the symptom tells you how far the damage has gone. That’s what this page covers, and it’s written for the owner who already knows the part and just needs it matched, priced honestly, and installed right.
One thing up front: Penhallow Remodeling Long Beach is an independent remodeling company. We are not affiliated with Mr-Glass, and we don’t claim to be. What we do is install and repair bathroom components that fit Mr-Glass and other recognized lines, and we stand behind the work in writing. That independence is actually useful to you: we’re not tied to one brand’s parts counter, so we match what fits and explain the tradeoffs.
Key Takeaways
- A full Mr-Glass bathroom remodel in Long Beach runs $9,000 – $28,000; smaller rooms land $5,000 – $12,000.
- We’re an independent contractor, not affiliated with Mr-Glass, and we price the work in writing before we start.
- Every job carries the 365-Day Done Right Promise, backed in writing.
- A live person answers (833) 510-6967 around the clock.
Which Mr-Glass Models This Applies To

Mr-Glass fixtures show up across a range of bathroom product lines, and the part that fits depends far more on measurements than on a model name. The fastest way to identify the right replacement is to look for the manufacturer’s label on the frame, the door edge, or the threshold, then measure the opening yourself: the width between jambs, the height from finished floor to the header, and the glass thickness (common stock runs 3/8 inch and 1/2 inch, and the hinges and seals are built differently for each). Bring those three numbers to any conversation about parts and you’ll skip most of the guesswork.
On Long Beach projects, the compatibility snag we see most often isn’t the glass at all. It’s the hinge pattern and the wall profile. A replacement door or panel that matches on width can still fail to mount if the existing frame uses a hinge style that’s been revised, or if the tile surround was installed over a different backer thickness than the original. That’s where an OEM part makes sense: matching the original hardware keeps the existing frame and glass aligned and avoids a full tear-out. Where the frame itself is sound and only a seal, sweep, or hinge has failed, a quality aftermarket equivalent from a recognized brand can do the job at a lower cost, and we’ll tell you plainly which way we’d go for your specific setup.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
Bathroom components rarely fail all at once. They give you signals for months. Here’s what we see on Long Beach jobs and what’s usually behind it:
- Water pooling at the base of the shower or tub. The door sweep or threshold seal has hardened and lost contact with the floor, so water creeps out on every use. Left alone, it reaches the substrate and softens the flooring.
- Glass that won’t stay in position or drifts open. Hinge tension has worn or the hinge screws have pulled from the frame. The glass is fine; the hardware holding it isn’t.
- Cloudy, etched, or spotted glass that won’t clean up. Long Beach’s marine air and hard water combine to mineral-stain glass over time. Once the surface is etched, no cleaner brings it back; the panel needs replacing.
- A frame that’s pulling away from the tile. Failed caulk or a missing shim has let the frame shift, which in turn cracks tile and opens a path for water behind the wall. This one gets worse fast.
- Mold or a musty smell that returns after cleaning. Moisture is trapped behind the surround or caulk line. The visible mold is the symptom; the water path is the problem.
Each of these is a real signal, not cosmetic noise. A soft spot under the floor or a bubbling paint line on the adjacent wall means water has already been traveling for a while, and that’s the point to get eyes on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Long Beach, a full bathroom remodel runs $9,000 – $28,000. A small bathroom remodel lands $5,000 – $12,000. If you’re replacing just the shower, a shower replacement runs $3,000 – $8,500, a walk-in shower installation runs $4,500 – $12,000, and a tub-to-shower conversion runs $3,500 – $10,000. A vanity swap alone is $800 – $3,000, and a backsplash-style finish behind the vanity is $800 – $2,500.
What drives the number up or down: the size of the room, whether the layout moves (which means plumbing), the shower or tub style, glass and hardware grade, and the backer and waterproofing you choose behind the tile. We itemize parts and labor on the written quote so you can see where the money goes. Finish brands like KraftMaid, Cambria, and Silestone (which we also install) can shift the total, and we’ll tell you honestly when a premium finish is worth it and when it isn’t.
Every project carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and make it right at no charge, in writing. And if a repair fails, the return visit is free, no service call fee.
DIY or Call Us?
Some of this you can safely check yourself. You can measure the opening, verify the glass thickness, confirm whether the hinge screws are stripped, and look for water staining or a soft floor near the shower base. If you find a seal that’s simply worn, replacing a sweep or a bead of caulk is within reach for most homeowners.
Where DIY goes wrong is anything structural: re-setting a door in a misaligned frame, repairing a substrate that’s taken on water, or chasing a leak that’s already behind the tile. Those jobs look small and turn into tear-outs when the underlying problem isn’t addressed. If you find soft flooring, a frame pulling loose, or moisture behind the wall, that’s the point to call. A real person answers (833) 510-6967 any time, and we’ll give you a written price before any work begins.
FAQs

Expect 10 to 15 years from a well-installed shower door and hardware, less if the seals aren’t kept up. Long Beach’s salt air and hard water are hard on glass and metal, so hardware and seals wear faster here than in drier inland markets, and routine caulk and sweep replacement is what stretches the life of the whole assembly.
Often, yes. A door that drifts, a sweep that leaks, or a frame that’s pulled loose can frequently be fixed by replacing the failed hardware or re-setting the frame rather than buying a whole new unit. If the glass is etched or the substrate behind the surround has taken on water, replacement is usually the honest answer, and we’ll tell you which one you’re facing.
A hardware or seal replacement is typically a same-day job, while a full shower or door replacement usually takes one to three days depending on tile and waterproofing work. A complete bathroom remodel runs longer, and your written quote will spell out the schedule so you know what to expect before we start.
We match by measurement and existing hardware first, then source an OEM part when keeping the original frame and glass aligned matters, or a quality aftermarket equivalent from a recognized brand when the frame is sound and only a component has failed. We don’t claim to keep parts in stock or on a truck; we confirm fit, then order what’s right for your setup.
Call (833) 510-6967 for a free estimate. A live person answers around the clock, we’ll give you a written price before any work starts, and every job is backed by the 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












