







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Long Beach Owner’s Guide
If your Barrette roof system has a failed component, we can install a Barrette-compatible replacement, and a typical roof repair in Long Beach runs $400 – $1,800 while a full roof replacement sits at $8,000 – $20,000 depending on roof size, system type, and material. Most Long Beach owners discover the problem after a winter storm pushes water past a worn flashing detail or a wind event lifts a shingle tab that never seals back down. By the time you see a ceiling stain, the part has usually been failing quietly for a season or two.
Barrette makes roof shingles, ridge ventilation, and flashing components that go onto a lot of Southern California homes. The tricky part is that Barrette’s product line shifted over the years, and matching a replacement piece to what’s actually on your roof takes more than reading a label off a box.
Which Barrette Models This Applies To

Barrette’s roofing line covers asphalt shingles, ridge vent systems, and a range of accessory components. If your roof was installed between the 1990s and the 2010s, there’s a reasonable chance the shingle or vent came from a Barrette production run. Identifying your exact product starts with finding the manufacturer label, which is usually stapled to the underside of the roof deck at the eave, visible from the attic. If the label is gone, a roofing supplier can often identify the profile by measuring exposure, tab width, and shingle thickness – typically in the 3-tab, architectural, or designer profiles with standard nominal dimensions.
OEM versus aftermarket matters here. Barrette no longer produces every shingle line it once made, so a direct OEM match for an older roof often isn’t available. A quality aftermarket equivalent that matches profile, color range, and fire rating is usually the practical answer. Matching color matters more than most owners expect: a close-but-not-exact dye lot will show against sun-faded shingles. We source matching components through roofing suppliers rather than claiming we keep parts on hand – we don’t stock Barrette parts, and no truck carries a warehouse. What we do is order the right piece and install it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Roofing Is Failing
Roof failures rarely announce themselves. These are the symptoms Long Beach homeowners describe when they call us:
- Curling or clawing shingle tabs. Heat and UV exposure in Long Beach’s coastal sun dry out the asphalt binder over time, causing edges to lift and curl away from the deck.
- Granule loss in the gutters. If you’re sweeping a handful of sand-colored grit off the driveway after every rain, the shingle’s protective surface is breaking down and the underlying mat is exposed.
- Ridge vent gaps or lifted caps. Wind-driven rain along the coast can work a ridge vent cap loose, letting water track under the flashing and into the attic.
- Water staining at the ceiling or attic deck. Brown rings or damp spots on rafters usually point to a failed flashing piece or a shingle field that’s no longer shedding water cleanly.
- Visible cracks or splits in individual shingles. Thermal cycling – the daily heat-and-cool swing common in Long Beach – cracks older shingles at the stress points, and each crack is an entry point for water.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what roof work typically runs in Long Beach, with the range reflecting roof size, pitch, access, and material:
| Service | Typical Long Beach Range |
|---|---|
| Roof repair (flashing, individual shingles, vent component) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the number up: steep pitch, multiple stories, tile versus asphalt, and how much deck repair the tear-off reveals. What drives it down: a single failed component versus a whole field of shingles. We separate parts from labor in the written quote so you can see what the material costs and what the installation costs. Every repair carries our 365-Day Done Right Promise – if it fails inside the year, we come back and fix it at no charge, and the written guarantee is in your hands before work starts. We pull permits where the work requires them.
DIY or Call Us?
Checking your own roof from the ground with binoculars is safe and smart. Look for lifted tabs, missing shingles, loose ridge caps, and granule pile-up at the downspouts. Climbing onto a pitched roof is a different matter. Roof work is one of the genuinely dangerous trades – a fall from a two-story Long Beach roof can be fatal, and walking a weathered shingle field can crack the very shingles you’re trying to protect. We don’t hand out step-by-step instructions for on-roof repair because the risk isn’t worth it. What an owner can safely do is document the symptom, photograph it from the ground or attic, and call us. We’ll tell you whether it’s a repair or a replacement and give you a written number before anyone touches the roof. Call (833) 510-6967.
FAQs

Barrette’s architectural asphalt shingles are typically rated for 25 to 30 years, but coastal Long Beach conditions – salt air, UV, and marine moisture – can shorten that to 18 to 25 years before granule loss and curling show up. If your roof is past 20 years, a professional inspection is worth the call.
Often, yes. A single lifted or cracked shingle, a failed flashing piece, or a loose ridge vent component can usually be repaired rather than triggering a full replacement. We make that call after looking at the actual damage – and we tell you plainly when a repair is the right answer versus when patching is just delaying the inevitable.
A single-component repair on a Long Beach roof usually takes two to four hours. A larger repair involving multiple shingles or a section of flashing runs one to two days. A full replacement is typically two to five days depending on roof size and weather. We give you a real arrival window, not a vague “sometime this week.”
We order through roofing supply distributors that carry Barrette-compatible components and matching-profile shingles. We don’t stock Barrette parts and we don’t claim to carry parts on a truck – what we do is identify your profile correctly, order the right piece, and install it. If an exact OEM match isn’t available, we source a quality equivalent that matches profile, color range, and fire rating.
The roof is the one system in your house that takes the full brunt of Long Beach weather, and a small failed component left too long turns into a deck repair and a ceiling stain. If you’ve spotted something up there, call Penhallow Remodeling Long Beach at (833) 510-6967 for a free estimate. We’ll give you a written price before any work starts, arrive in the window we promise, and stand behind the repair with our 365-Day Done Right Promise. We also work with homeowners on KraftMaid, Cambria, and Silestone products in other parts of their homes.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












