







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Long Beach Owner’s Guide
If you own a Jerith addition or ADU component that’s failing, here’s the short answer: we install and replace Jerith-compatible home additions and ADU systems in Long Beach, with most installed projects running $45,000 – $130,000 depending on footprint, foundation work and finish level. We don’t claim to be Jerith or affiliated with them; we’re an independent contractor that has worked on enough Jerith assemblies to know where they fail. Most Long Beach owners find us the same way: a hairline crack that shows up near a door frame, a floor that’s started to feel soft underfoot, or a roofline on the addition that no longer sits flush with the main house. Call (833) 510-6967 and we’ll come look.
Which Jerith Models This Applies To

Jerith builds its addition and ADU lines in modular series, and the part you need depends entirely on which series and year you have. Look first at the manufacturer label inside the unit – usually a metal or foil tag mounted on the interior wall or under a threshold plate. That label gives you the model designation and the build date, and those two facts are what let us match a replacement component instead of guessing. Measure the opening or panel in question yourself before you call; measurements plus the label get you a firm number faster than anything else.
The OEM-versus-aftermarket call matters here. Genuine Jerith components fit the original framing exactly, which shortens install and protects the existing warranty terms. Quality aftermarket equivalents can cost 20 – 30% less and hold up fine, but only when they match the same load and moisture spec – and mismatched aftermarket panels are the single most common reason a “cheap fix” fails again within a season. On the coast, our salt air and the seasonal moisture swing from Long Beach marine layer to summer dry heat accelerate wear on seals and fasteners, so a part that passed in a dry inland market may not survive here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
These are the symptoms we hear most often from Long Beach owners before they call. Each points to a specific underlying cause.
- Soft floor or spongy decking in the addition. Water has reached the subfloor through a failed seal or flashing, and the substrate is breaking down. Catching this early is the difference between a small repair and a full section replacement.
- Hairline cracks at seams or door frames. Settlement or a shifting foundation is transferring stress to the joints. A single crack is often cosmetic; a growing network of them points to movement underneath.
- Roofline that no longer meets the main house cleanly. Flashing or fascia separation lets water in at the most vulnerable seam. This is the cause of most interior water damage on additions we see in Long Beach.
- Doors and windows that stick or won’t latch. The frame has racked – the unit is out of square, often from foundation or header movement. Sticking doors are a structural signal, not a hardware problem.
- Visible moisture, staining or musty smell inside. A seal has failed and moisture is trapped. Left alone, this reaches insulation and framing, and the repair scope grows fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Long Beach, installed home addition work typically runs $45,000 – $130,000, and ADU construction lands at $90,000 – $220,000. Garage conversions, which some owners pursue instead of a full addition, run $30,000 – $80,000. A targeted component replacement – a panel, seal, or section – sits well below the full-project range, and we’ll tell you plainly whether you’re in repair territory or replacement territory before you commit to anything.
What drives the number: footprint and square footage, foundation and site work, whether we’re matching an existing finish or starting fresh, and the finish grade you choose. Your written price covers parts, labor, permit pull and inspection. Every project comes with the 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge, and that’s written into the agreement. If a repair fails, the return visit is free – no service call fee. We source materials through recognized trade brands like KraftMaid, Cambria and Silestone where countertops or cabinetry are part of the scope, so the products behind the promise hold up as well as the work.
DIY or Call Us?
Some things you can safely check yourself. Walk the perimeter of the addition and note where the roofline meets the main house. Look for staining, probe gently at any soft spot with a screwdriver, and check that doors and windows open and close without binding. Those observations help us quote accurately.
What we’d steer you away from: pulling panels to inspect framing, resealing flashing at roof level, or resetting a racked frame. Those are where DIY goes wrong – you can open a moisture path you can’t see, and a racked frame that looks simple to square is rarely just out of alignment. On anything involving the roof or structural framing, a trained professional should be the one on the ladder. Call (833) 510-6967 for a free look – we’ll tell you what’s checkable and what needs our hands.
FAQs

Fifteen to twenty-five years is the realistic window for well-maintained components in this climate – our marine layer and salt air shorten that compared to inland markets. Seals and flashing are the wear items; the framing behind them usually outlasts both. If yours is past fifteen years and showing staining or soft spots, it’s worth a look now. Call (833) 510-6967 for a free assessment.
Often yes – a single failed seal, a section of flashing, or one panel can usually be repaired without touching the rest. The deciding factor is whether moisture has reached the substrate; if it has, a patch will fail again. We’ll tell you honestly which side of that line you’re on. Call (833) 510-6967 and we’ll take a look.
A targeted component swap is typically a one to three day job; a full section replacement runs longer depending on scope and permit timing. We’ll give you a real timeline in writing, not a ballpark, before we start. Call (833) 510-6967 to schedule your free estimate.
We match by the manufacturer label on your unit plus field measurements, so the replacement fits your specific series rather than a generic equivalent. We don’t stock parts – we source the correct one for your model and confirm fit before install. Call (833) 510-6967 for an exact quote – estimates are free.
If you’re in Long Beach and your Jerith addition or ADU is showing its age, don’t wait for a small seal failure to become a framing repair. Give us a call at (833) 510-6967 for a free estimate, a written price you can hold us to, and a clear answer on whether you’re looking at a repair or a replacement.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












