







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Long Beach Owner’s Guide
If a section of your ActiveYards paver driveway has shifted, settled, or started holding water, we replace and re-lay those pavers in Long Beach, and a typical paver driveway installation runs $7,000 – $18,000 depending on square footage, base prep, and border detail. We’re an independent remodeling contractor, not affiliated with ActiveYards, and we source matching pavers rather than guessing at color and profile.
Owners usually find the problem the same way. A car tire drops half an inch at the end of the driveway after a winter of rain. Or a paver at the apron rocks when you step on it. Or the joint sand washes out every time the sprinklers run, leaving lines of loose grit by the garage door. On the coast side of Long Beach, salt air and marine moisture work on the joints faster than inland heat does, so the first sign is often sand loss, not a cracked stone.
Which ActiveYards Models This Applies To

ActiveYards pavers aren’t sold under a single model number the way a cabinet or a fixture is. The brand covers a family of paver profiles and colors, and what matters for a match is the product line, the profile (for example a 4×8 tumbled or a 6×9 plank-style), the color name, and the thickness. Standard driveway pavers run 2 3/8 inches thick; some ActiveYards wall and patio profiles are thinner, and putting a patio-grade paver in a driveway is how you get cracking under a loaded vehicle. Check the original installation paperwork or the contractor’s spec sheet if you have it. If you don’t, pull one loose paver and measure its length, width, thickness, and face profile (chamfered, tumbled, straight edge) before anything else. A phone photo next to a tape measure, taken in daylight, gets us most of the way there.
The OEM-versus-aftermarket decision is simpler here than with mechanical parts. ActiveYards pavers are a hardscape product with a color and profile, so a quality equivalent from a recognized brand (Belgard and Unilock are two we work with) can match closely if the profile and color family line up. The catch is dye lot: a paver made this year won’t be a perfect color match to one laid ten years ago, even in the same line. We’re upfront about that before we order. Aging, sun, and Long Beach’s marine air shift the tone of the existing field, so we usually plan to blend the new pieces into the field rather than run them in an obvious patch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
- Sections sinking or settling. The base under the pavers (the compacted gravel and sand layer) has shifted, usually from water getting under the edge or a poorly compacted original install. A driveway that dips in one lane is a base problem, not a paver problem.
- Joint sand washing out. Coastal rain and sprinkler overspray strip the polymeric or regular joint sand faster in Long Beach than inland. Once the joints empty, pavers loosen and start to rock.
- Pavers rocking underfoot or under tires. Loose pavers mean the bedding layer has failed or the edge restraint has let go. Left alone, a rocking paver grinds its neighbors and the failure spreads.
- Chipping, spalling, or hairline cracks. Usually a sign of a paver that was too thin for driveway traffic, or a winter freeze that got water into a saturated stone. Freeze-thaw in the colder months does this to under-thickness pavers.
- Efflorescence (white powdery haze) that keeps coming back. A cosmetic mineral bloom that points to moisture trapped in the base. It can be cleaned, but if it returns, the water source underneath is the real issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway and paver work runs in Long Beach, installed, so you can plan:
| Work | Installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
What drives the number up or down: square footage, how much base has to be torn out and re-compacted, edge restraint and border detail, and whether the existing field can be blended or needs full replacement. A repair that re-lays a settled section costs far less than a full drive. You get a written price before any work starts and a written guarantee on the repair, and if the repair fails inside the 365-Day Done Right Promise window, we come back and fix it at no charge.
DIY or Call Us?
You can safely do the inspection yourself. Take photos, measure a loose paver, note where the water pools, check whether the joint sand is gone, and see if the edge restraint is cracked. That costs nothing and helps us quote accurately. Where DIY goes wrong is the repair: re-laying pavers means digging out and re-compacting the base, setting the bedding layer at the right depth, and locking in edge restraint so the section doesn’t sink again next season. Skipping the base work is why a driveway that was “fixed” two years ago is dipping again now. If the driveway sits over a buried utility, gas line, or irrigation run, that’s another reason to have it done properly. Call (833) 510-6967 and we’ll look at your photos and give you a free written estimate.
FAQs

A properly installed paver driveway with a solid base and good drainage holds up 25 to 50 years, and the pavers themselves often outlast the base beneath them. In Long Beach’s coastal air, the joints and base need attention sooner than the stones do, so expect joint sand refreshing every few years and a reseal on a similar schedule. Call (833) 510-6967 for an exact quote on your drive.
Often yes. Settled sections, rocking pavers, and washed-out joints can be lifted, the base re-compacted, and the same pavers re-laid, which is far cheaper than a full replacement. If the base is failing across the whole drive or the pavers are too thin for traffic, replacement makes more sense, and we’ll tell you which one you’re looking at before you spend a dollar. Estimates are free at (833) 510-6967.
A section repair or re-lay of a few pavers is usually a one- to two-day job, while a full paver driveway installation runs several days depending on square footage and base excavation. We give you a defined arrival window and a real timeline up front, not a vague “we’ll be by sometime.” Call (833) 510-6967 to get your window.
We match by product line, profile, color family, and thickness, sourcing from recognized hardscape brands like Belgard and Unilock when an exact ActiveYards match isn’t available, and we’re honest about dye-lot differences before we order. We don’t claim to stock pavers ourselves; we source what your drive needs. Call (833) 510-6967 for a free written estimate.
If your ActiveYards driveway has a section that’s settled, rocking, or washing out every time it rains, the fix starts with a look and a written number. We’ll assess the base, match your pavers, and hand you a written price and guarantee before any work begins. Our technicians have up to 22 years of experience, and we also work with KraftMaid, Cambria, and Silestone on the interior side. Call Penhallow Remodeling Long Beach at (833) 510-6967 to schedule your free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












