







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Long Beach Owner’s Guide
We install and replace Unilock-compatible windows and doors throughout Long Beach, and a typical installed window or door unit runs $800 – $2,500 per opening, with full whole-home window replacement at $4,500 – $15,000 and impact-rated installation at $8,000 – $25,000. Most owners call us after the part has already told them it’s done: a window crank that spins without moving the sash, condensation fogging between the panes in a Long Beach marine-layer morning, or a sliding door that catches on the track and needs a shoulder to close. There’s usually a single failed component behind the symptom, and Matching it to the right Unilock series is the whole job. That’s where a real parts conversation starts.
Which Unilock Models This Applies To

Unilock’s window and door hardware falls into a handful of families: casement and awning operators, multi-point tilt-and-turn gear, patio slider rollers and locks, and threshold and weatherstrip components. The parts don’t swap freely between them. A casement operator for a top-hung awning window has a different arm length and gear ratio than the one on a side-hinged casement, and the brackets don’t line up even when the housing looks identical. Before you order anything, find the etched glass or frame label (usually in the upper corner of the sash or the head of the frame) and write down the full model string, including the series prefix. Then measure the visible face of the operator housing and the arm travel in millimeters. Those two numbers separate the right part from the near-miss.
OEM replacement for Unilock is the safe path when the model string is legible. Quality aftermarket equivalents (Truth, Amesbury, Roto and similar manufacturer-part cross-references) are often identical castings with better availability, and they cost about half of a factory-sourced piece. The trade-off is fit tolerance: aftermarket parts are matched by measurement, not by model, so an experienced installer verifies hinge-side clearance and arm geometry before the order goes in. We install Unilock products alongside KraftMaid, Cambria and Silestone in Long Beach remodels, and the same rule applies to all of them: match by model, verify by measurement, install once.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
Here are the symptoms we see most often on Long Beach jobs, and what’s usually behind each one:
- The crank turns but the window doesn’t move. The operator’s internal gear is stripped, usually because someone forced a window that was painted or swollen shut. Continuing to crank a stripped gear can crack the sash frame.
- Fogging between the panes. The sealed glass unit’s edge seal has failed, and the desiccant can no longer absorb moisture. This is a glass-unit replacement, not a hardware job, and it gets worse fast in coastal humidity.
- The sliding door drags or jumps the track. Usually worn rollers or a bent lower track, and in Long Beach homes it’s frequently both. Replacement rollers are a small part; a warped track is a bigger conversation.
- The lock or handle feels loose or won’t catch. Multi-point hardware has tie bars and corner drives that wear, and a single failed linkage can leave you unable to lock one window on a wall of them. That’s a security problem, not just an annoyance.
- Drafts or water at the threshold. Weatherstrip and sill gaskets degrade in the salt air, and the leak is almost always the seal, not the frame. Catching it early avoids water behind the interior trim.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Long Beach, a single failed operator or lock mechanism typically runs $150 – $450 installed, because the part is small and the labor is under an hour. Whole-window replacement is a different number: $4,500 – $15,000 for standard replacement across a home, and $8,000 – $25,000 for impact-rated installation, which many Long Beach homeowners pursue for coastal storm protection and insurance reasons. The drivers are unit size, glazing package (single, double, or impact-rated laminated glass), series and frame material, and how many openings you’re doing at once. We give you a written line-item price before any tool comes out of the truck, so the number you approve on day one is the number on the invoice. Every installation carries our 365-Day Done Right Promise: if something fails inside the year, we come back and fix it at no charge, and the free second visit if a repair fails applies with no re-inspection fee.
DIY or Call Us?
You can safely check a few things yourself: read the model label, wipe down the track and clean the rollers on a slider, tighten visible handle screws, and look for daylight at the weatherstrip. What we don’t recommend is opening a sealed glass unit, prying a multi-point lock mechanism apart, or replacing a window that sits above a second-story drop or over glass without proper fall protection. Sagging sashes, stripped operators that are pressed into a painted frame, and lock hardware that leaves a window unlatched on a lower floor are all worth a professional. Those attempts usually cost more to undo than to do once. Call (833) 510-6967 and we’ll tell you honestly whether you’re looking at a $200 part or a window replacement.
FAQs

A well-maintained operator or lock set typically lasts 10 – 15 years, and coastal Long Beach homes trend toward the shorter end because salt air and marine humidity accelerate seal and gasket wear. Glass seals fail sooner than metal hardware, often in 8 – 12 years. Call (833) 510-6967 for an honest read on your specific unit.
Often, yes. A stripped operator, worn rollers, or a loose multi-point linkage is a part swap, not a window replacement, and it’s usually the least expensive path. Fogged glass and cracked frames are replacement jobs. Call for a free estimate and we’ll tell you which you’re facing.
Most single-part replacements take under an hour. A whole-window replacement takes two to three hours per opening, and full-home installations are scheduled in a written window so you know exactly when we arrive. Call (833) 510-6967 to get yours on the schedule.
We match by the Unilock model string on your label and verify by measurement, then source either the factory piece or a cross-referenced aftermarket equivalent, with the trade-off explained before you approve it. We don’t carry stock, so your part is ordered to your window. Call (833) 510-6967 for a free estimate.
Penhallow Remodeling Long Beach is an independent service provider and is not affiliated with Unilock. We’re part of the Kingswell family of companies, each location independently owned and operated, and a live person answers our phone 24/7. Give us a call at (833) 510-6967 to schedule your free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












