







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Long Beach Owner’s Guide
Quikrete-ready fence installation in Long Beach typically runs $3,500 – $9,000 installed, depending on lineal footage, post spacing, and whether we’re setting into sand, hardpan, or an existing concrete curb. We handle the whole job: layout, digging, post setting, and panel or picket hang. As a general contractor, we’re an independent provider and not affiliated with Quikrete; we just know their setting mixes and fast-setting products cold, because that’s what holds up in coastal Long Beach soil.
Owners usually discover the problem the same way. A fence post that used to stand plumb starts to lean after a wet winter. You push it back, it moves. Or a gate that swung free for years now drags because the hinge post has rotated a few degrees. Sometimes the concrete collar around a post is cracked and lifting, and you can see daylight between the post and the mix. By the time the fence line looks like a wave, the failure started months earlier at the base, not the boards.
Which Quikrete Models This Applies To

Quikrete makes a few different products that get called “fence concrete,” and they’re not interchangeable. Fast-setting concrete is the one most homeowners grab for post setting because it lets you pour dry mix into the hole and add water without pre-mixing. Regular concrete mix needs a mixing tub and the right water ratio, and it sets slower. Post-setting foam is a newer option that works for lighter loads but isn’t the right call for a 6-foot privacy fence taking coastal wind in Long Beach. Get the product wrong and the post either sets soft or cracks out within a season.
To identify what you’re working with, read the bag label closely. Fast-setting concrete cures fast and usually lists a post-setting ratio on the bag; regular mix does not. If the label is gone, look at the collar around the post: a fast-set collar tends to be uniform and dense, while a hand-mixed one often shows aggregate pockets and a rougher top. There’s no OEM part to match here, only the right mix for the right post and soil. If you’re unsure which product was used on an existing fence, we can identify it on a site visit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Fence Installation Is Failing
Fence bases fail slowly in Long Beach, and the symptoms show up before the fence falls. Here’s what we look for on a first walkthrough.
- A post leaning more than a few degrees. The concrete collar has cracked or the soil under it has shifted. Once a post leaves plumb, it rarely comes back without resetting.
- Cracks and uplift in the concrete collar. Often caused by too much water in the mix or a collar poured too shallow for the post height. A shallow collar in sandy soil lets the post rock.
- A gate that drags or swings crooked. The hinge post has rotated in the ground. Gate posts carry more load than line posts and need a deeper, wider collar.
- Loose pickets or panels that sway independently of the post. The post is holding, but the fasteners or rails have loosened. This one is often fixable without pulling the post.
- Visible rot or termite damage at or below grade. Wood posts in coastal Long Beach soil take on moisture fast. If the post is soft at the base, the concrete is holding a dead post.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed fence work in Long Beach runs $3,500 – $9,000 for the lead range on this page, and that number moves with a few real variables: lineal footage, post spacing (6-foot vs 8-foot centers), fence height, material (wood, vinyl, or aluminum), and whether we’re setting posts into open soil or cutting out old concrete. A short run of standard wood privacy fence sits at the low end. A longer run with gate posts, mixed materials, or old concrete demolition pushes toward the top.
What’s in that number: layout, digging or concrete removal, Quikrete fast-setting mix and water, post setting and plumb, rail and panel or picket installation, gate hang and adjustment, hardware, and cleanup. Parts and labor are itemized on the written quote, so you can see the mix cost separately from the labor. Every job carries our 365-Day Done Right Promise in writing: if a post we set shifts or a gate we hung fails inside the year, we come back and fix it at no charge. The written price you get before we start is the number on the final invoice.
DIY or Call Us?
There’s a real split here. What you can safely check yourself: walk the fence line and push each post; note any that move. Look at the collar top for cracks or uplift. Check whether gate posts have rotated by holding a level against them. Look at the base of each wood post for softness or termite damage. That walkthrough tells you how many posts are actually failing versus how many just look tilted because one board is warped.
Where DIY goes wrong is the reset. Pulling a post that’s set in a cracked collar often takes a long pry bar and patience, and if the old concrete isn’t fully removed, the new mix sits on rubble and fails again. Mixing ratio is the other trap: too much water weakens the fast-set, too little leaves dry pockets. And a gate post set too shallow will rotate again within a season. If more than one or two posts are moving, call us. We’ll give you a written number before any work starts, and a live person answers (833) 510-6967 any hour. Estimates are free.
FAQs

A properly set fast-setting concrete post in Long Beach soil typically holds for 15 to 25 years, with the post material usually failing before the concrete does. Coastal moisture and marine air are the main limiters; wood posts rot before the mix gives out. Call (833) 510-6967 for a free estimate on your fence line.
Yes, if the post itself is sound and only the collar has cracked or lifted. We can often reset a single post without tearing out the whole fence, which is a fraction of a full replacement. If the post is soft or rotated significantly, replacement is the honest answer. Call us and we’ll tell you which one you’re looking at.
A single post reset is usually a few hours on site, including digging out the old collar and giving the new fast-set mix time to cure. A full fence run with fresh posts runs one to three days depending on footage and whether old concrete has to come out. We give you an arrival window in writing before we start.
We source Quikrete fast-setting concrete through standard building-supply channels and match the mix to your post size, soil, and fence height. We don’t claim to stock parts on a truck; the mix is ordered for your job and delivered to the site. We also work alongside other trade brands on related projects, including KraftMaid, Cambria, and Silestone cabinetry and countertop work when a fence job is part of a larger project.
When you’re ready to stop pushing a leaning post back into place, call Penhallow Remodeling Long Beach at (833) 510-6967. You’ll get a live person, a written price before any work starts, and a 365-Day Done Right Promise on the finished fence. Estimates are free and there’s no pressure to book. Our technicians have up to 22 years of experience, and every one of them is background-checked and arrives in uniform.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












