







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Driveway & Pavers: The Long Beach Owner’s Guide
If your American Standard driveway and paver system is cracking, settling or losing its finish, we install and replace these systems for Long Beach homeowners at $7,000 – $18,000 for a full paver driveway. That’s the installed price, labor and base material included, written down before we start. Most Long Beach owners don’t wake up and say “my pavers failed.” They notice a hairline crack near the apron that widens after a rain, or a low spot in the drive that holds water for two days after the sprinklers run.
We’re Penhallow Remodeling Long Beach, an independent contractor working with American Standard paver systems and the underlying hardscape that supports them. We’re not affiliated with American Standard, so when we tell you what’s right for your Long Beach home, it’s not a manufacturer script. Our technicians have up to 22 years of experience with California hardscape, and every job comes with the 365-Day Done Right Promise in writing.
Which American Standard Models This Applies To

American Standard paver systems aren’t a single product line; they’re a family of interlocking concrete and clay pavers in different thickness classes, joint patterns and edge restraints. The most common failure we see in Long Beach is a mismatch between the paver thickness and the base depth under it. A 60mm paver set on 4 inches of compacted base will crack at the driveway apron where the city sidewalk meets your property; a 80mm paver on 6 inches of base with a proper geotextile layer holds up far better to Long Beach’s clay-heavy soil and the Coastal Plain drainage that comes with it.
Here’s how Long Beach owners identify what they actually have:
- Measure the paver thickness. A tape measure at a broken edge tells you 40mm, 60mm or 80mm. Driveway pavers should be 60mm minimum for foot traffic, 80mm for vehicles. If you find 40mm pavers in a driveway, that’s the failure waiting to happen.
- Look for the edge restraint. American Standard systems use a rigid plastic or concrete edge restraint. If your pavers are spreading at the driveway edges, there’s no restraint or it’s failed, and no amount of re-sanding will fix it.
- Check the joint sand. The stabilizing sand between pavers that’s missing, washed out or replaced with playground sand won’t lock the field together. Long Beach rain will spread a compromised field within one or two seasons.
- Check the base material at the crack. If you can see fine soil or clay under a failed paver, the base was too thin or never compacted. That’s a base failure, not a paver failure, and swapping pavers alone won’t hold.
On the OEM-versus-aftermarket question: American Standard pavers are a proprietary system, and exact-color replacements sometimes need to come from American Standard directly. But the base prep, bedding sand, edge restraint and joint sand can use quality equivalents from Belgard or Unilock without hurting the system. We’ll tell you which parts need the OEM match and which don’t, in the written price, before we order anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Driveway & Pavers Is Failing
Here’s what a real failure looks like at the paver level, with the cause behind each one. Long Beach soil behavior and the marine air are both working against a marginal install.
- Hairline cracks radiating from the driveway apron. This is usually base settlement right where your drive meets the city sidewalk, the single most common failure point in Long Beach. The apron takes the vehicle load, the base is thinnest at the transition, and the crack opens season by season.
- Rocking or loose pavers in the field. A paver that moves underfoot has lost its bedding sand. In Long Beach, that usually means either the sand was never compacted or water is getting under the field and washing it out, which points to a drainage problem, not just the pavers.
- Joint sand washing out after rain. Stabilizing sand is supposed to lock the field. If it’s gone after the first winter, the joint spacing is wrong or the pavers are the wrong thickness class for the load they’re carrying.
- Efflorescence, that white chalky bloom on the surface. It’s a sign of water moving through the pavers, usually from a base that stays wet. Long Beach’s foggy mornings and clay soil trap moisture, and a paver field with no drainage layer will bloom season after season.
- Low spots or standing water in the driveway. Water pooling more than 24 hours after rain means the slope is off, the base settled unevenly or the drainage plan was wrong. Standing water on pavers eventually loosens the joint sand and opens cracks, so this is a “fix it before winter” item.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Paver driveway installation in Long Beach runs $7,000 – $18,000 depending on square footage, paver thickness class, base depth and whether the old driveway has to come out. A driveway replacement, including tear-out of the existing surface plus new base and pavers, typically runs $5,000 – $14,000 if you’re changing the material but keeping the existing footprint. A full paver patio runs $3,500 – $11,000.
What drives the top of the range: poor base soil that needs excavation and imported compacted base, a driveway apron that needs its own engineered transition to the city sidewalk, drainage work, and thick 80mm pavers instead of 60mm. What we do not do is quote a range and then change the number after demolition. Every homeowner gets a written price before any work starts, and that’s the number on the invoice. The written guarantee covers the workmanship for 365 days, and if the joint sand washes out or a paver cracks at the base, we come back and fix it at no charge. Materials come from trade brands we trust, including Belgard and Unilock for pavers; the same sourcing standard applies to our KraftMaid, Cambria and Silestone work indoors.
DIY or Call Us?
There are three things a Long Beach homeowner can safely check: measure a few paver thicknesses, look for the edge restraint at the driveway border, and note where water pools after rain. That’s it. Replacing pavers yourself is possible for a single cracked unit. Rebuilding a failure isn’t. A paver driveway is a system, and 90% of the work is buried in the base, the compaction and the slope. Resetting pavers on top of a compromised base is the single most common DIY mistake we get called to fix. The good news: a crack at the apron is a job we can scope in one visit. Call (833) 510-6967 for a free estimate, and if you want a second look after the first repair, third-party or ours, we’ll come back free with no service call fee.
FAQs

A properly installed American Standard paver driveway with 80mm pavers on 6 inches of compacted base should hold 25 to 30 years in Long Beach’s coastal climate. The pavers themselves last longer; the base, joint sand and edge restraint are what determine lifespan, and Long Beach’s clay soil and marine moisture accelerate a marginal base failure. Call (833) 510-6967 for an honest assessment of what you have under your current drive.
Yes, if the failure is localized, usually just a few pavers at the apron or a section of edge restraint, we can replace the failed field and re-lock it with fresh stabilizing sand. If the base has settled across more than a small area, or water pools in three or more spots, a full rebuild is usually cheaper than three years of spot repairs. We’ll give you both prices in writing so you can see the comparison. Call (833) 510-6967 for a free estimate.
A typical Long Beach paver driveway replacement is a 2 to 4 day job, remove the old surface, prep the base, install the pavers and joint sand. Larger drives or a base that surprises us can push it to a week. We give you a written arrival window, not a range, and we keep the job site clean while we work. Call (833) 510-6967 to schedule.
American Standard pavers and system components come from the manufacturer or an authorized supplier, and we check the thickness class and color match against what you already have before ordering. If an exact color match is no longer made, we’ll tell you plainly and give you the closest available option, plus what changes with it. We don’t stock parts and we don’t carry them on a truck; every part is sourced per job. Call (833) 510-6967 and we’ll walk you through what matches.
Whether it’s a single hairlined apron or a full driveway rebuild, we’ll give you a written price before we pick up a tool. Call Penhallow Remodeling Long Beach at (833) 510-6967 for your free estimate. A real person answers 24/7, and the number on day one is the number on the invoice.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












