







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Home Additions & ADU: The Long Beach Owner’s Guide
If you own an Atlas home addition or ADU in Long Beach and something in the structure is failing, the installed fix usually runs $45,000 to $130,000 for a full addition and $90,000 to $220,000 for an ADU, depending on foundation, framing and finish level. We install to Atlas-compatible specs, and we’re an independent service provider, not affiliated with Atlas. Most Long Beach owners don’t notice a problem until a hairline crack in the drywall starts spreading, a door in the new wing stops latching, or the ceiling in the addition sags near where it ties into the original house. By then the cause has usually been moving underfoot for a season or two.
Which Atlas Models This Applies To

Atlas builds additions in a few configurations, and the part that fails depends on what you have. The most common in Long Beach are stick-framed room additions tied to a single-story or two-story house, attached and detached ADUs, and garage conversions. Each has a different weak point. Additions that tie into an older Long Beach house often fail at the connection point, where the new roof plane meets the original. Detached ADUs fail more often at the slab and the exterior shell. Garage conversions fail where the old garage slab meets the new finished floor.
To identify what you’re working with, check the permit set you got at completion. The title block names the Atlas series, the plan number, and the structural schedule. If you don’t have the set, pull it from Long Beach’s permit records, or measure the wall thickness at a window jamb and the ceiling height at the ridge. A 2×6 wall at 16 inches on center is a different spec than a 2×4 wall at 16. For an Atlas addition, matching the OEM framing and tie hardware to the original plan matters more than swapping in a generic equivalent, because the load path was calculated for that hardware. Where an OEM bracket is back-ordered, we use a rated aftermarket equivalent and document the substitution with the inspector.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Home Additions & ADU Is Failing
An Atlas addition can look fine from the street and still be failing behind the drywall. Here’s what we see in Long Beach, and what each symptom usually means.
- Hairline cracks above doors and windows that keep spreading. This usually means the header or the tie hardware between the new wall and the original is settling, not that the drywall is bad. Patching the drywall without fixing the movement is why the crack comes back.
- A door in the addition that won’t latch, or sticks in one season and swings free in another. That’s often seasonal movement in the framing, driven by our coastal humidity swings. If it only sticks in summer, the framing is moving more than it should.
- Water staining on the ceiling where the addition roof meets the original house. The flashing at the tie-in is the most common leak point on any Atlas addition in Long Beach. Water finds the low corner first.
- Soft spots or a hollow sound when you walk across the floor in the new wing. On a raised-floor addition, that’s subfloor or joist moisture. On a slab addition, it can be the slab itself.
- A musty smell or higher-than-normal humidity in the ADU. Detached ADUs in Long Beach sit close to the marine layer, and a failed vapor barrier or a blocked foundation vent turns the unit into a moisture trap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

An Atlas addition in Long Beach typically runs $45,000 to $130,000 installed, and an Atlas ADU runs $90,000 to $220,000. A garage conversion runs $30,000 to $80,000. The number moves with foundation type, whether the addition is attached or detached, roof tie-in complexity, finish level, and the permitting path. We give a written price before any work starts, so the number you get on day one is the number on the invoice.
What drives the top of that range: a full foundation pour versus a post-and-pier, a roof tie-in into an older Long Beach house with a nonstandard pitch, and the finish package. What keeps you at the bottom: a simple rectangular footprint, an existing slab, and modest finishes.
Parts and labor are broken out line by line on the quote. The 365-Day Done Right Promise covers the work in writing. If something fails within the year, we come back and make it right at no charge, and the return visit is free, no service call fee, no re-inspection fee.
DIY or Call Us?
Some checks are safe for an owner. You can look for cracks at the door and window corners, walk the floor to feel for soft spots, check the exterior caulk and flashing at the roof tie-in, and run a moisture meter on the drywall in the addition. That’s detective work. It’s not dangerous.
The repair itself is where DIY goes wrong. Moving framing, cutting into a load path, or re-flashing a roof tie-in without knowing the structure behind it can make a $3,000 repair into a $30,000 one. Anything that touches the framing, the foundation, or the roof tie-in needs a trained professional. We’d rather tell you that up front than clean up after a weekend project.
Call (833) 510-6967 to schedule a free estimate. A live person answers, day or night.
FAQs

An Atlas addition in Long Beach should hold up 40 to 50 years if it was built well and the moisture is managed, but the roof tie-in and the foundation are what fail first, often in 15 to 25 years, not the framing. Salt air and the marine layer are the reasons. Call (833) 510-6967 for an inspection and an exact quote, which is free.
Often yes. A single tie-in leak or a non-latching door can be repaired without rebuilding the addition. Structural movement or a soft floor usually means partial replacement. We look first, tell you which one it is, and give you a written price on both options.
A targeted repair on an Atlas addition usually takes 2 to 5 days once materials are in hand. A structural repair or a roof tie-in rebuild runs 1 to 3 weeks. A full addition runs 3 to 6 months. We give you an arrival window and keep to it.
We pull the Atlas plan number from your permit set or Long Beach permit records and match the hardware and framing to spec. Where an OEM part is available, we use it. Where it’s back-ordered, we use a rated aftermarket equivalent and document it for the inspector. We don’t claim to stock parts, but we install KraftMaid, Cambria and Silestone finishes alongside the structural work.
Call (833) 510-6967 for a free estimate, a written price before work starts, and the 365-Day Done Right Promise in writing. Call to schedule your free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












