







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Long Beach Owner’s Guide
Barrette kitchen remodeling in Long Beach is a full kitchen project built around Barrette cabinetry and the parts that support it, and most homeowners find us when a door hinge, drawer glide or cabinet box has started to fail. Typical installed projects run from $14,000 to $45,000 depending on layout, cabinet line and countertop material. We install Barrette-compatible cabinetry and hardware; Penhallow Remodeling Long Beach is an independent service provider and is not affiliated with Barrette.
The picture is almost always the same. A homeowner in Belmont Shore opens a cabinet and hears a soft crack, or a drawer in a 1950s bungalow off Anaheim Street stops closing flush against the face frame. Sometimes it’s a hinge that no longer holds the door at 90 degrees, leaving a gap at the top corner. What looks like one broken part usually turns out to be a hardware run at the end of its life, and the fix depends on matching the exact series and finish before anyone picks up a screwdriver.
Key Takeaways
- We install Barrette-compatible cabinetry and hardware across Long Beach, not just the part that failed.
- Long Beach kitchens typically run $14,000 to $45,000 installed, with cabinet installs from $4,000 to $13,000.
- Written price before any work starts, the 365-Day Done Right Promise, and a live person on the phone.
- Hardware match matters: an off-spec hinge will fit the screw holes but strain the door over time.
Which Barrette Models This Applies To

Barrette cabinetry has changed hands and spec sheets over the years, so the model on your label matters more than the brand name on the door. Barrette’s stock and semi-custom lines share hinge bore spacing and drawer glide mounts within a series, but not across series. A door from a Barrette 24-inch base cabinet in one line may hang on the same 35mm euro hinge cup as another, but the overlay (how far the door sits over the face frame) can differ by a few millimeters – and a few millimeters is exactly why a replacement door looks wrong next to the others.
To identify the right part, look first at the sticker inside a base cabinet or on the back of a drawer box. It usually lists the series name, the cabinet dimension in inches, and a date code. If the sticker is gone, measure three things: the hinge cup bore (usually 35mm, but confirm), the overlay from the cabinet edge to the door edge, and the drawer glide mount spacing between screw holes. Write those numbers down before you call anyone.
OEM parts are the safest match when you’re replacing one piece in a run of Barrette cabinets you plan to keep for years. Quality aftermarket hinges and glides – Blum, Grass, Salice among the common equivalents – cost less and often perform as well, but only if the overlay and bore match. We don’t stock parts or carry them on a truck; we source them against your model and measurements, then install on the scheduled visit. In a Long Beach kitchen, the salt air and coastal humidity in a home near the water work on metal faster than inland, so we also check the existing hardware for corrosion when we’re matching replacements. If you’re weighing a swap against a broader update, the same sourcing logic applies to KraftMaid, Cambria and Silestone work we do in nearby kitchens.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Doors that won’t hold their position. The hinge has lost tension or the cup bore has cracked. On Barrette cabinets more than ten years old, this usually means the hinge spring fatigued before the door itself did.
- Drawers that stick or drop. Undermount glides wear at the wheel or the track bends out of true. Once a glide drops, the drawer front starts rubbing the face frame and the finish goes first.
- A gap at one corner of a closed door. The overlay has shifted, either from a loose hinge screw or a cabinet box that has settled. This one is worth checking early because the strain compounds.
- Soft or swollen areas at the bottom of a base cabinet. Moisture has reached the substrate (the board under the finish), usually from a slow leak or a dishwasher that’s been venting into the cabinet for years.
- Cracking or peeling at the door edge. The laminate or finish is separating from the core. Cosmetic at first, but the exposed edge absorbs moisture with every Long Beach marine layer and gets worse.
In Long Beach, we see the moisture-driven failures most in ground-floor kitchens near the water and in older homes where the cabinet run sits against an exterior wall. We also see plenty of pure wear – a family kitchen that’s been opened and closed several thousand times a year for fifteen years is going to need hardware.
Replacement Cost & What’s Included

For Long Beach homeowners, kitchen projects with Barrette-compatible cabinetry typically run $14,000 to $45,000 installed. Here’s how the numbers break down:
| Scope | Installed range (Long Beach) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet line (stock vs. semi-custom), door style and finish, countertop material, whether the layout changes, and whether plumbing or electrical need to move. Countertop material alone can swing a project by thousands – quartz sits higher than laminate, and the brand you pick matters.
Parts plus labor is quoted as a line item, so you see the hardware cost and the install cost separately. Every project gets a written price before any work starts – the number on day one is the number on the invoice. And every job we do is backed by the 365-Day Done Right Promise: if something fails inside the year, we come back and fix it at no charge, in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is safe to check yourself. You can measure the hinge bore, write down the overlay, photograph the sticker inside the cabinet, and tighten a loose hinge screw with a screwdriver. That information is genuinely useful and saves time on the phone.
What goes wrong with DIY is the swap itself. A replacement hinge that looks identical but has a different overlay will pull the door out of alignment with the rest of the run, and once you’ve oversize-drilled a screw hole, the repair involves filling, redrilling and rehanging – more work than the original job. Door and drawer front replacement is where we see the most rework. Cabinet work at counter height is not dangerous the way electrical or gas work is, but moisture and structural repairs at the cabinet box are where a small problem becomes a larger one fast.
If you’re not sure whether it’s a hardware fix or the start of something bigger, call us at (833) 510-6967. A live person answers 24/7, and we’ll tell you honestly whether you’re looking at a part swap or a project.
FAQs

Most Barrette hardware lasts 10 to 15 years with normal use in a Long Beach home, and shorter in coastal kitchens where salt air accelerates corrosion on the metal. A home within a few blocks of the water often needs hardware replaced sooner than the same cabinets inland. Call (833) 510-6967 to schedule a free estimate – we’ll tell you what’s actually at the end of its life.
Sometimes yes. A hinge that’s simply loose can be re-tightened or re-anchored, and a drawer glide that’s out of adjustment can often be realigned without a new part. When the spring has fatigued or the bore has cracked, replacement is the honest answer. We check both before quoting. Call (833) 510-6967 for a free estimate and we’ll tell you which one you’re looking at.
A single door or drawer hardware swap is usually an hour or two. A full hardware replacement across a kitchen run is typically a day. A cabinet installation as part of a kitchen remodel takes days to weeks depending on scope. We give you a real arrival window before the visit, not an all-day block, and we back every job with the 365-Day Done Right Promise.
We match against your series name, the cabinet dimensions on the label, and your measurements – hinge bore, overlay and glide mount spacing. From there we quote OEM and quality aftermarket equivalents so you can see the cost difference. We don’t stock parts; we source them to your model and install on the scheduled visit. Call (833) 510-6967 to start with a free estimate.
Get a Written Price Before Any Work Starts
Whether you’re replacing one failed hinge on a Barrette cabinet or planning a full kitchen remodel in Long Beach, the process is the same. We measure, match against your model, and give you a written price before anyone picks up a tool. Background-checked, uniformed technicians arrive in the arrival window we gave you, and if a repair fails inside a year, we come back and fix it at no charge. Materials come from recognized trade brands – KraftMaid, Cambria, Silestone and others – so the products behind the guarantee hold up as well as the promise. Call (833) 510-6967 for a free estimate. A live person answers any time.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












