







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Long Beach Owner’s Guide
Home additions in Long Beach typically run $45,000 – $130,000, and ADU construction runs $90,000 – $220,000, installed with fixtures and finish materials drawn from brands like Blanco, KraftMaid, and Cambria. We pull the permits, pass the inspections, and hand you a written price before work starts. Penhallow Remodeling Long Beach is an independent service provider and is not affiliated with Blanco.
Most owners don’t discover the Blanco side of an addition project through a catalog. They find it during the planning walk-through, when the sink they want is a Blanco and the footprint it needs has to be framed into the addition before the slab is poured. The other common discovery: a Blanco sink specified at rough-in turns out to be the wrong bowl depth for the ADA clearances in a converted garage, and the cabinet run has to be re-detailed. Either way, the Blanco product and the addition plans have to agree early, or the schedule pays for it later.
Which Blanco Models This Applies To

Blanco’s residential lineup breaks into a few families you’ll meet on Long Beach addition and ADU drawings. The Ikon and Precis lines are the apron-front and undermount favorites for ADU kitchens; the Diamond and Valea lines show up in rental-grade builds where a smaller bowl and a tighter budget matter. The compatibility gotcha that trips people up most: apron-front depths vary by series, and the cabinet face-frame cutout for a 30-inch Ikon is not interchangeable with a 30-inch farmhouse sink from another line. Measure the apron height, the exterior width, and the bowl depth on the spec sheet before a cabinet shop cuts anything.
Identifying your model is straightforward. The Blanco name and model number sit on a laser-etched mark on the underside of the sink or on the original packaging insert. If yours is set and sealed, the rough-in cutout dimensions in the cabinet are your second-best identifier. From there it’s the OEM-versus-equivalent decision. Blanco’s own sinks and accessories carry the company’s finish and dimensional warranty; a matched third-party sink can work in the same aperture, but confirm the warranty you’re relying on sits with the part you actually install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
When we’re called into a Long Beach addition or ADU where the Blanco element is the complaint, the symptoms usually point at planning and framing problems, not the product itself:
- Water pooling at the sink edge. A Blanco undermount set into a rebuilt countertop without a proper reveal lets water sit against the seam. In Long Beach’s marine air, that seam is where staining and caulk failure start first.
- Cabinet face cracking around an apron-front sink. The apron sink adds weight the cabinet wasn’t framed for. If the sink base was original to the house and reused in an addition, the frame can split within a year of the heavier install.
- Drain misalignment after a slab or floor change. New floors in a converted garage raise the finished height, and a Blanco sink drain that lined up at rough-in now sits off the trap arm.
- ADA clearance shortfalls in a converted garage ADU. The sink and faucet placement doesn’t meet the knee and reach clearances the plan assumed, and the whole vanity run needs rework.
- Rough-in that doesn’t match the spec sheet. The most common failure: the sink specified in the plans isn’t the sink that was framed for, and the cutout has to be redone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Home additions in Long Beach run $45,000 – $130,000. ADU construction runs $90,000 – $220,000. Garage conversions, the most common path to an ADU here, run $30,000 – $80,000. Those are installed ranges, and they include fixture and finish materials from brands like Blanco, KraftMaid, Cambria, and Silestone.
What drives the number up or down: square footage, whether the addition is framed onto an existing slab or needs new foundation work, the ADU path you choose (conversion versus new detached structure), and the fixture line. A Blanco sink swapped into a smaller bowl keeps the kitchen line lower; an apron-front sink in a newly framed cabinet run adds framing and finish. The written price we give you before any work starts separates materials and labor line by line, so you can see exactly what the Blanco product costs and what the install costs. Every project is covered by our written guarantee and the 365-Day Done Right Promise: if something we installed fails inside the guarantee period, we come back and fix it at no charge, and we make a free second visit if a repair fails, with no service call and no re-inspection fee.
DIY or Call Us?
There’s a fair amount you can check yourself before calling. Measure the sink aperture. Photograph the model mark on the underside. Confirm the cabinet face-frame width against the spec sheet. Read the plans for the rough-in dimensions. Those four checks save real time and often answer the question outright.
Where it goes wrong for an addition or ADU project: cutting a cabinet face for an apron-front sink, re-framing a sink base, or moving a drain trap arm after a floor height change. Those are framing and plumbing decisions where a few inches of error means a re-cut cabinet or a leak inside a new wall. We’d rather see you spend the visit on the planning side and let us handle anything that involves a cut or a connection. Call (833) 510-6967 and we’ll schedule a free estimate.
FAQs

Fifteen to twenty-five years is a realistic range for a Blanco sink under normal use in Southern California. The finish is the telling detail: Blanco’s own finish warranty covers many of its lines for a set period, so check the warranty card that came with yours. The installation is what shortens a sink’s life more often than the product. A sink set into a countertop without proper support, or an undermount without a clean reveal, fails at the seam years before the sink itself does. Long Beach’s coastal humidity speeds up mild wear at exposed seams.
Often yes, and the sink is rarely the part that fails. What fails is the seal, the caulk line, the drain basket, or the cabinet framing under the sink. Those are repairable and usually far cheaper than swapping the sink. If the finish is chipped or the bowl has a crack, replacement is the answer. The best way to decide is a quick call: we’ll tell you which repair applies, or confirm a replacement is the right move. Call (833) 510-6967 and we’ll quote it.
The swap itself is a half-day to a day of work once the cabinet aperture and countertop are ready. In an active addition or ADU, the sink install slots into the finish phase, after cabinets are set and the countertop is templated. The realistic constraint is the cabinet and counter schedule, not the sink. That’s why we want the Blanco product locked in before the cabinet order goes out, so the aperture is cut for the sink that actually goes in.
We specify Blanco, KraftMaid, Cambria, and Silestone through recognized trade channels, which means your sink comes from the manufacturer’s distribution network rather than a resale listing. That matters because the warranty attaches to the part and the channel it came through. We confirm the model and spec against your plans before ordering. If a size or finish is back-ordered, we tell you the lead time up front so it lands in the schedule rather than pushing the finish phase back after cabinets are already set.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












