







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Long Beach Owner’s Guide
Bathroom remodeling with Boral materials in Long Beach typically costs $9,000 – $28,000 installed, depending on bathroom size, tile and fixture choices, and whether the layout changes. We install Boral-compatible materials and match replacement parts to your existing Boral product line, and most projects can be scheduled without a long wait. Penhallow Remodeling Long Beach is an independent service provider and is not affiliated with Boral.
Owners usually discover a failing Boral component the same way: a hairline crack in tile that spreads after a shower, grout that crumbles at the floor line within a year, or a shower pan that stays damp for hours. In Long Beach homes near the water, salt air and year-round humidity speed up the wear on sealants and substrates. The material itself is rarely the problem. What fails first is what’s behind and around it.
Key Takeaways
- Full Boral bathroom remodels in Long Beach run $9,000 – $28,000 installed.
- Smaller bathroom remodels fall in the $5,000 – $12,000 range.
- Most Boral failures trace to substrate moisture, not the tile or fixture itself.
- Every job comes with a written price before work starts and our 365-Day Done Right Promise.
Which Boral Models This Applies To

Boral makes bathroom materials under several lines, and matching a replacement part to your specific product is where most homeowners get stuck. The three you’ll run into most in Long Beach bathrooms are Boral ceramic and porcelain wall tile, Boral natural stone (travertine and limestone are common in older coastal homes), and Boral’s manufactured stone veneer used on feature walls and tub surrounds. Each line has its own thickness and edge profile, and those differences matter when you’re replacing one section rather than the whole wall.
The fastest way to identify your product is to check the back of a loose tile or a scrap left in the garage: Boral stamps its name and often a series code on the reverse. If no scrap is available, measure the tile face and thickness precisely. Boral’s wall tile lines typically run in specific thickness bands, and a mismatch will show as a lip at the grout joint.
The OEM-versus-aftermarket call depends on what failed. For tile, matching the exact Boral series matters if you’re replacing part of a wall; for the substrate behind it, a quality aftermarket cement board performs as well as any branded panel. We source recognized brands because the guarantee only holds if the materials underneath it do. We also install KraftMaid, Cambria, and Silestone products on the cabinetry and countertop side of bathroom work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
These are the symptoms we hear about most from Long Beach homeowners. Each points to a specific cause, and knowing the cause tells you whether you’re looking at a patch or a tear-out.
- Hairline cracks that spread after showering. This usually means the substrate behind the tile is flexing. Boral tile doesn’t crack on its own; it cracks because the board under it moves or got wet.
- Grout that crumbles at the floor or shower line. Moisture is getting behind the tile and pushing the grout out. In coastal Long Beach humidity, this shows up faster than inland because the wall never fully dries.
- Tile that sounds hollow when tapped. A hollow sound means the thin-set didn’t bond across the full tile. That section is loose and will eventually pop. It’s a substrate or installation issue, not a Boral material defect.
- A shower pan that stays damp for hours. The waterproofing membrane under the pan has likely failed. Water sits in the mud bed and works its way into the framing, which is the most expensive kind of failure to ignore.
- Efflorescence (white powder) on stone or grout. Minerals are being pushed out as moisture moves through the material. On Boral natural stone in Long Beach, this often means the sealer has worn off and water is getting in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Long Beach, a full bathroom remodel with Boral materials runs $9,000 – $28,000 installed. A small bathroom remodel lands at $5,000 – $12,000. If you’re replacing a shower only, shower replacement is $3,000 – $8,500; a walk-in shower installation is $4,500 – $12,000; and a tub-to-shower conversion is $3,500 – $10,000. A vanity replacement alone is $800 – $3,000.
What drives the number up: tile removal and disposal (older Long Beach bathrooms sometimes have two layers of tile), substrate replacement when the board behind the tile is wet, and any plumbing or layout changes. What keeps it in range: keeping the footprint the same and choosing a standard Boral tile series over natural stone.
Every job gets a written line-item price before work starts, so you see the parts and labor broken out rather than a single ballpark. The work carries our 365-Day Done Right Promise in writing.
DIY or Call Us?
Some things you can safely check yourself. Run a finger along the grout at the shower floor and look for soft spots. Tap tiles with a screwdriver handle and listen for hollow sections. Check under the sink and around the toilet base for staining that suggests a slow leak. Those checks tell you the scope of the problem, and they’re safe to do.
Where DIY goes wrong is the tear-out. Waterproofing a shower correctly means a sloped pan, a proper membrane, and a flood test before any tile goes back on. Skip any of those steps and the new Boral tile fails the same way the old one did, usually within a year or two. Shower and tub work also involves the water supply and drain, and a mistake there causes damage that costs far more than the repair. This is a job worth having done by someone who’ll put the price and the guarantee in writing.
We send background-checked, uniformed technicians and answer the phone 24/7 with a real person. Call (833) 510-6967 to schedule a free estimate.
FAQs

A properly installed Boral tile or stone installation should last 20 years or more. The material itself holds up well; what limits lifespan on the coast is the waterproofing and substrate behind it. In Long Beach’s salt air and humidity, sealers on natural stone need refreshing more often than inland, and that maintenance is what keeps the install going the distance.
Sometimes. A single cracked tile over a sound substrate can usually be swapped. Crumbling grout alone can be raked out and regrouted if the board behind it is dry. But if the shower pan or the substrate is wet, a patch will fail again, and a full replacement is the honest answer. We’ll tell you which one you’re looking at during the estimate, and the estimate is free. Call (833) 510-6967 for an exact quote.
A shower replacement or tub-to-shower conversion in Long Beach usually takes about one to two weeks once work starts, including demo, waterproofing, tile, and cure time for the grout and sealant. A full bathroom remodel runs longer, typically three to five weeks, depending on tile removal and whether the layout changes. We give you a defined arrival window and a written schedule before work begins.
We start with the product identification: the stamp on the back of a tile, a series code, or precise measurements of face size and thickness. From there we match the Boral line and confirm the substrate and waterproofing products that go behind it. Because we’re an independent provider and not affiliated with Boral, we source through trade channels rather than a single factory line, which means we can match discontinued or older Boral series more reliably than a retail shelf. Call (833) 510-6967 to start with a free estimate.
If your Boral bathroom is showing cracks, loose tile, or a shower that won’t dry, the cost of waiting usually shows up as framing damage behind the wall. We’ll give you a written price before any work starts, a real arrival window, and a guarantee in writing through our 365-Day Done Right Promise. Every technician who comes to your door is background-checked and in uniform, and a live person answers the phone any hour. Call (833) 510-6967 for a free estimate and we’ll walk your Long Beach bathroom with you, explain what failed and why, and put the number in writing before a single tile comes down.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












