A Penhallow company - serving Long Beach, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Boral · Long Beach

Boral Home Additions & ADU in Long Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A second-story addition that matches the existing roofline
A wide opening with a new beam where the kitchen wall was removed
A home office with a built-in desk and shelves
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Home Additions & ADU: The Long Beach Owner’s Guide

If your Boral addition gets installed well, the product delivers – the challenge is almost never the panels themselves. Home additions and ADU construction in Long Beach run $45,000-$130,000 depending on foundation, framing, roof tie-in and finish level, and a standalone ADU typically lands $90,000-$220,000. We’re an independent provider, not affiliated with Boral, but we install Boral-compatible assemblies every month and quote them in writing before anyone touches the site.

Call (833) 510-6967

Owners usually find a problem before the warranty letter arrives. A laundry-to-ADU conversion in a 1920s Belmont Heights bungalow reads fine on paper until the rains come and the tie-in wall starts wicking moisture behind the siding. A garage conversion in Long Beach off a rear alley shows a hairline crack at the curb plate the first summer. The pattern repeats: a junction between old structure and new addition that never got the flashing or substrate details right.

Which Boral Models This Applies To

A finished backyard cottage with a small covered porch

Boral’s North American building products span several lines, and the chapter that matters for additions is the cladding, trim and wall assembly side rather than the roof tile most homeowners picture first. Boral siding and trim products are specified by profile and thickness, not by a single model number, so the first job is identifying what’s actually on the wall. Peel back one corner of trim, or look at the original submittal package from the developer if you have it. Stamps, installers’ chalk marks and fastener spacing tell you more than any label.

The OEM-versus-aftermarket decision turns on one question: can the profile and finish be matched? Boral-specific trim and siding need the correct substrate behind them – a cement board substrate (the moisture-resistant layer the cladding sits on) rather than a bare stud face – or the material voids its own performance. We aim to source within the same product family first, then step to a quality equivalent only when the original profile is discontinued. That’s the conversation we have with every Long Beach homeowner before ordering: which piece, which thickness, which finish.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Home Additions & ADU Is Failing

Failing isn’t usually a dramatic failure. It’s small, and it’s almost always about water. Here’s what to watch for:

  • Water staining or soft spots along the tie-in wall. The flashing where new meets old has lifted or was never lapped correctly. In Long Beach’s marine air, that shows up within a couple of wet seasons, not immediately.
  • Caulk lines pulling away from trim joints. Thermal movement plus a substrate that wasn’t fastened tight enough. If the caulk opens every spring, the joint underneath is the real problem.
  • Visible cracking at foundation or curb transitions. A garage-to-ADU conversion sits on a new slab meeting an old one; differential movement opens the seam. Early cracks are worth a look before they become framing damage.
  • Stains or discoloration in the wall cavity behind the cladding. Moisture is getting trapped. Boral cladding needs a drainage plane behind it – if the builder skipped it on the addition side, you’ll see the cost later.
  • Door or window frames that stick after heavy rain. A sign the addition’s envelope is moving or taking on water. It’s the closest thing to an early warning you’ll get.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A room opened to the studs with new wiring and plumbing

Additions and ADUs aren’t a one-part swap, so pricing reflects scope. Typical figures in Long Beach:

Scope Price range
Home addition $45,000-$130,000
ADU construction $90,000-$220,000
Garage conversion $30,000-$80,000

What moves the number: foundation conditions, the complexity of the roof tie-in, whether the addition needs a full mechanical and electrical upgrade to meet current code, and finish level. Every quote is a written line-item price, not a range with an asterisk – so you see the cladding, substrate and flashing as separate lines. The work itself is backed by the 365-Day Done Right Promise: if something we installed fails inside the year, we come back and fix it at no charge, and that’s in writing.

DIY or Call Us?

Some things you can check yourself. Walk the tie-in wall after heavy rain and look for staining. Run your hand along the interior near the junction for soft drywall. Watch the caulk lines for a full wet season and photograph what opens. That’s diagnosis, and it’s useful.

What we don’t recommend is having a go at flashing, substrate or a structural tie-in yourself. Those details are where a quick repair becomes a long repair – and because this is real construction work, not a part swap, the cost of getting it wrong is measured in thousands. If you’re seeing water intrusion or movement, call (833) 510-6967. A background-checked, uniformed technician walks the site and tells you plainly what’s failing and what it costs to fix. Live person answers, any hour.

Frequently Asked Questions

A framer checking new wall framing on a home addition

How long should a Boral addition assembly last? A properly installed Boral cladding and wall assembly should perform for decades. The real life limit in Long Beach is usually the flashing and substrate, not the cladding – and those outlive the box-store caulk holding the seams. If the tie-in details were done right, you’ll get the full service life out of the material.

Can the failing part be repaired instead of replaced? Often, yes. A failed flashing or a lifted trim joint can be reworked without pulling the whole addition. If the substrate behind it has gone soft, that’s a larger repair. We quote both paths so you can choose – and estimates are free.

How long does the work take? A flashing and tie-in repair is a day or two. A full cladding replacement on an existing addition runs around a week depending on square footage and access. We give you a written arrival window rather than a vague week, and stick to it.

How do you source the Boral part? We match the profile and thickness from your existing installation first, source within the Boral family where it’s current, and use a quality equivalent only when a profile is discontinued. You’ll see the product and its price in the written quote before we order.

Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.

Ready to price your Boral addition or ADU? Call (833) 510-6967 to schedule your free estimate. We’ll give you a real number in writing before work starts, a defined arrival window, and the 365-Day Done Right Promise covering the work. We also install KraftMaid cabinetry, Cambria quartz and Silestone countertops on finished spaces.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-6967
Local Service Coverage

Request a Free Estimate in Long Beach

Tell us what you need - Penhallow Remodeling Long Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch