







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Long Beach Owner’s Guide
We install Boral-compatible windows and doors in Long Beach, and the parts your house actually needs depend entirely on which Boral line is in the wall. Installed window replacement in Long Beach typically runs $4,500 – $15,000 for a standard whole-home package, and $8,000 – $25,000 if you’re stepping up to impact-rated units for the coastal exposure zones around Belmont Shore and the Peninsula. Door hardware and glazing repairs sit well below those figures, often in the low hundreds once we know the series.
Owners rarely call us because they’ve read the spec sheet. They call because something stopped working: a slider that won’t seat against the jamb anymore, a door that swings past its stop in a Santa Ana wind, a sash that fogs from the inside and won’t clear. Long Beach sits close enough to the water that salt air speeds up corrosion on hinges, rollers and weatherstripping faster than inland homeowners expect. That daily marine layer does quiet damage for years, then one morning the door just doesn’t latch.
Which Boral Models This Applies To

Boral’s window and door catalog covers a lot of ground, and the part you need is determined by the series, not the brand name alone. Their vinyl new-construction and replacement lines, their aluminum series built for coastal jobs, and the patio door families all use different roller assemblies, balance cartridges, hinge styles and weatherstrip profiles. A roller from one series will not seat in another even when the two look identical at a glance.
Here’s how we identify the right part, and it’s the step most homeowners skip. First, find the certification label – it’s usually on the head jamb of the operable panel or tucked behind the screen track on a slider. It carries the series code, the glass package and the manufacture date. Second, measure the visible glass, not the frame: rough opening dimensions will send you to the wrong part every time. Third, look at the fastener pattern on the hinge or roller bracket. Boral has changed profiles within the same line across production years, so two doors from the same model family five years apart can take different hardware.
The OEM-versus-aftermarket call is where we’re honest with you. Genuine Boral parts are the safe match when the piece is structural or tied to a warranty claim – a roller carriage, a multi-point lock, a balance assembly. For weatherstripping, sweep gaskets and glazing tape, a quality equivalent from a recognized trade supplier performs identically and costs meaningfully less. We tell you which side of that line your part falls on before we order anything. On a recent Alamitos Beach job, a homeowner had already bought two OEM rollers that didn’t fit; the label showed a mid-production revision, and the correct carriage was a different part number entirely.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- The slider drags or needs a shoulder to close. That’s worn roller carriage or a track that’s collected grit and oxidized. Salt air accelerates the corrosion, so Long Beach sliders on the ocean side of the street show it years before inland homes do.
- Fogging between the panes that won’t clear. A failed seal in the insulated glass unit, not a cleaning problem. The whole IGU gets replaced; you can’t re-seal a failed unit from outside.
- The door swings, sags or won’t hold its stop. Settled hinge screws or a stripped hinge plate, usually from a heavy door hung on light hardware. In a Long Beach bungalow it often traces to years of ground movement plus a door that was never re-shimmed.
- Daylight or a draft around the frame. Compressed weatherstripping and a worn sweep, sometimes a jamb that’s pulled slightly out of square. You’ll feel it most on a windy afternoon.
- The lock or handle turns stiff or won’t engage. A dry or corroded multi-point mechanism, or a strike that’s drifted out of alignment. Left alone it stresses the panel and shortens the life of the whole assembly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Window replacement in Long Beach runs $4,500 – $15,000 for standard units, and impact window installation for homes in the coastal exposure areas lands at $8,000 – $25,000. What pushes you up the range: the number of openings, glass package (laminated or impact-rated adds cost), whether the frames need re-shimming, and how much trim and stucco repair a retrofit demands on an older Long Beach house.
We price the part and the labor separately so you can see both numbers before anything is ordered. Every job gets a written price before work starts – the number on day one is the number on the invoice. That price covers the part, the labor, cleanup, and the written guarantee on the work: if something we installed fails inside 365 days, we come back and make it right at no charge. If a repair we did doesn’t hold, the return visit is free – no service call, no re-inspection fee. Door hardware and glazing-only repairs are quoted individually once we’ve pulled the series code.
DIY or Call Us?
Some things you can safely check yourself, and it’s worth doing before you call. Read the certification label and write down the series code and date. Wipe the roller track and confirm the rollers spin. Tighten the visible hinge screws with a screwdriver – turn, don’t force. Feel the weatherstrip for compression and note where daylight shows.
Where DIY goes wrong: replacing an insulated glass unit, swapping a multi-point lock, re-shimming a door frame, or resetting a slider track that’s out of square. These jobs look simple and go sideways fast because a Boral assembly is a system – the panel, the frame and the hardware are matched, and a part installed slightly off stresses everything around it. A window that’s been re-hung wrong can leak at the sill and rot the wall cavity behind it before you notice. We’d rather you stop at the screwdriver and call us. Our technicians have up to 22 years of experience, they’re background-checked and arrive in uniform, and a live person answers the phone any hour. Call (833) 510-6967 and we’ll check the label details with you and quote the part honestly. We work independently of Boral and aren’t affiliated with them; we source genuine Boral parts where they’re the right match and quality equivalents where they aren’t. We also install KraftMaid cabinetry, Cambria and Silestone countertops for homeowners mid-remodel.
FAQs

How long should Boral windows and doors last in Long Beach?
A properly installed Boral assembly should give you 20 to 30 years, but hardware, weatherstripping and roller carriages wear out well before that – often in 8 to 12 years on the ocean side of Long Beach, given the salt air. The glass and frame outlast the moving parts every time. Call (833) 510-6967 for a quote on replacing just the worn hardware.
Can the part be repaired instead of replaced?
Often yes, and we’ll tell you which. Rollers, sweeps, weatherstrip and hinges are straightforward swaps. A fogged insulated glass unit or a stripped multi-point lock usually means replacement of that component, not the whole window. We check the series code first so we quote the right fix. Call (833) 510-6967 to schedule a free look.
How long does the swap take?
A hardware or weatherstrip repair is typically a single visit, an hour or two on site. An insulated glass unit swap depends on lead time for the correct glazing, which we confirm from your label before ordering. Whole-window replacement is a multi-day job we schedule and price in advance. Call (833) 510-6967 for a written timeline.
How do you source the part?
From the series code on your certification label, matched against Boral’s current part numbers. Where Boral has revised a profile mid-production, we confirm the correct revision before ordering – this is where most DIY mismatches happen. We order genuine parts for structural and locking pieces and quality equivalents for weatherstripping and sweeps. Call (833) 510-6967 and we’ll walk you through the label.
Boral windows and doors in Long Beach don’t have to stay stuck, sagging or drafty. We’ll read your label, price the part in writing and get your home sealed up again. Call Penhallow Remodeling Long Beach at (833) 510-6967 for a free estimate – a real person answers, day or night, and the written price comes before any work starts.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












