







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Driveway & Pavers: The Long Beach Owner’s Guide
We install Boxabl-compatible driveway and paver packages in Long Beach, and a full paver driveway installation here typically runs $7,000 – $18,000 depending on square footage, base prep and whether we’re tying into an existing apron. If you’re replacing a failed concrete section rather than starting fresh, concrete driveway installation in Long Beach sits at $4,500 – $12,000, and we can usually walk the site and give you a written number within a few days of your call.
Owners rarely call us because a driveway “looks old.” They call because something specific broke: a slab section heaved after a wet winter, pavers settled into ruts where the base wasn’t compacted, or a crack ran from the Boxabl unit’s corner footing straight across the apron. Boxabl’s units are factory-built, but the ground they sit on is still Long Beach ground, and that’s where the failures show up.
Key Takeaways
- Paver driveway installation runs $7,000 – $18,000 in Long Beach; concrete replacement runs $4,500 – $12,000.
- Most Boxabl driveway failures trace back to base prep and drainage, not the surface material.
- We’re an independent remodeling company, not affiliated with Boxabl.
- Every job gets a written price before work starts and our 365-Day Done Right Promise in writing.
Which Boxabl Models This Applies To

Boxabl’s Casita is the model most Long Beach owners have on their lot, and the driveway and paver work around it is largely model-agnostic in the sense that it’s about the site, not the box. What changes between a Casita and a stacked or multi-unit configuration is the load path: where the unit’s structural footings transfer weight to the ground, how much apron you need for a vehicle to clear the entry, and how drainage must fall away from the unit rather than toward it.
To identify what you’re dealing with, check the unit’s data plate (usually inside the entry, on a frame member) for the model and serial line, then measure the existing footprint, apron width and slope. Bring those numbers to a site visit. There’s no such thing as an “OEM driveway” the way there’s an OEM window or door latch – pavers and slabs are site-built, so the OEM-versus-aftermarket question for a Boxabl driveway really comes down to base material, paver line and drainage design, not a factory part number. We spec base and pavers from recognized trade brands like Belgard and Unilock so the materials behind the work are as solid as the guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Driveway & Pavers Is Failing
- Heaving or lifting at the slab edge. Water is getting under the slab and freezing or swelling the soil. In Long Beach this is less about frost and more about poor drainage pooling against the unit.
- Pavers settling into ruts or dips. The base wasn’t compacted in lifts, or the subgrade wasn’t stable. Paving stone doesn’t fail on its own; the layer beneath it does.
- Cracks running away from the unit’s corner footing. A load-path or base-thickness problem. If the crack starts at the corner of the Boxabl unit, that’s a flag worth a close look.
- Weeds and sand loss between joints. Joint sand has washed out and the locking layer is gone. Left alone, pavers start to shift and the surface loses its structure.
- Standing water after rain. Slope is wrong or a drain is blocked. Long Beach’s coastal moisture and occasional heavy rain events make this the most common complaint we hear.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Paver driveway installation in Long Beach runs $7,000 – $18,000 for a typical residential apron and drive, including base prep, compaction, pavers and joint sand. Concrete driveway installation runs $4,500 – $12,000, and driveway replacement (tearing out and rebuilding the full run) runs $5,000 – $14,000. If you’re sealing an existing paver driveway, that’s $250 – $700.
What drives the number up: existing material that has to be demoed and hauled, poor subgrade that needs stabilization, drainage corrections, and paver line choice. What’s included in our written quote: demo and disposal, base material and compaction, the pavers themselves, joint sand, and cleanup. We give you a written price before any work starts, so the number on day one is the number on the invoice. Every job carries our 365-Day Done Right Promise: if the work fails inside the guarantee period, we come back and fix it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check your own slope with a level or a string line, look for cracks and pooling, and note where water is running. That’s a homeowner’s inspection, and it’s useful information to have before you call.
What we’d steer you away from is the paver installation itself, not because it’s dangerous in the way springs or electrical work is, but because the failure mode of DIY pavers is almost always the base. Getting three to four inches of compacted, properly graded base right takes equipment and know-how; skipping that step is why so many paver driveways look great for one season and settle by the next. If you want the number before you decide, call us at (833) 510-6967 for a free estimate with a written price.
FAQs

A properly installed paver driveway typically lasts 25 to 30 years or more; the pavers themselves often outlast the base, and re-sanding and re-leveling are the maintenance that keeps it solid. Long Beach’s coastal moisture means drainage matters more than sun exposure here. Call (833) 510-6967 for an assessment.
Often, yes. Settled pavers can be lifted, the base re-graded and re-compacted, and the stones re-laid, which is far less costly than a full replacement. Whether repair makes sense depends on how much of the base has failed; we’ll tell you plainly which it is. Call (833) 510-6967 for a free estimate.
Most residential paver driveway replacements in Long Beach run three to six days, weather permitting, with base compaction and curing time built in. We give you a defined arrival window and keep the site clean. Call (833) 510-6967 to schedule.
We specify pavers from recognized trade brands like Belgard and Unilock, along with the aggregate base and joint sand that hold them, and we write the material spec into your quote so you know exactly what’s going in the ground. We’re an independent remodeling company and not affiliated with Boxabl. Call (833) 510-6967 for a written price.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












