







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Bathroom Remodeling: The Long Beach Owner’s Guide
We handle CertainTeed-compatible bathroom remodeling throughout Long Beach, and a full bathroom remodel here typically runs $9,000 to $28,000 installed, depending on size, fixture grade and tile. Smaller bathrooms usually land between $5,000 and $12,000. CertainTeed isn’t a fixture brand you replace a cartridge on – it’s the Gypsum Company’s family of wallboard, tile backer and moisture-resistant panels that sit behind your tile and around your tub, and when one of those panels fails, you find out through a soft spot underfoot, a tile that rocks when you step on it, or grout that keeps cracking open along the same line no matter how many times you patch it. Long Beach owners usually spot it in the shower wall first, then trace it back to a panel that took on water years before anyone noticed.
To be clear about who we are: Penhallow Remodeling Long Beach is an independent remodeling company. We are not affiliated with CertainTeed, and we don’t manufacture or sell their products. We install and repair bathroom systems built around CertainTeed backer and board products and match the right panel, thickness and fastening method to the job.
Key Takeaways
- Typical CertainTeed-based bathroom remodel in Long Beach: $9,000 – $28,000 installed.
- Failures almost always start with moisture behind the tile, not with the tile itself.
- Panel thickness and fastening schedule have to match your wall assembly. Wrong thickness is the most common redo we see.
- We give you a written price before any work starts and stand behind it with our 365-Day Done Right Promise.
Which CertainTeed Models This Applies To

CertainTeed’s bathroom-relevant lineup breaks into a few families, and identifying yours is the first step before we can match anything. GlasRoc is their moisture-resistant gypsum board for walls in humid rooms. Diamondback Tile Backer is the cement-board-style panel that goes behind tile. ProRoc covers their standard and moisture-resistant gypsum. ShowerGuard is their coated glass for shower doors, a different beast from the panels and worth naming so you don’t order the wrong thing.
How to identify what you have: look for the printed edge tape or board stamp along the factory edge, usually visible in the attic, behind the toilet tank, or where a panel meets a stud. Write down the product name, the thickness (backer panels commonly come in 1/4-inch and 1/2-inch, and shower walls need the thicker panel on studs spaced no more than 16 inches on center), and the panel’s dimensions. If the stamp is painted over or gone, we measure the panel thickness directly at an exposed edge.
The OEM-versus-aftermarket call matters here. For CertainTeed backer and board, the “OEM” route means the matching CertainTeed panel for your assembly. Quality aftermarket cement backer boards are widely available and perform well when the thickness and fastening schedule are correct. Where we lean OEM is when the rest of your wall is CertainTeed and you want a continuous, warranted system; where we’re comfortable with an equivalent is a small patch where matching brand adds cost without adding performance. Either way, we tell you which one we’re recommending and why before we buy anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Bathroom Remodeling Is Failing
Long Beach sits close enough to the water that bathroom walls here take a steady moisture load, and the panels behind your tile are what absorb the consequences. Here’s what failure looks like:
- Soft or spongy spots underfoot near the tub or shower. Water has reached the panel or the subfloor behind it and broken down the gypsum core. By the time you feel it, the damage has usually been building for a season or two.
- A single grout line that keeps cracking. The panel behind that line is moving or swelling, and the grout is telling you so. Patching the grout treats the symptom, not the panel.
- Tiles that pop loose or rock when stepped on. The bond between tile and backer has failed, almost always because the backer got wet and lost its grip. This is the classic sign of a backer panel that wasn’t meant for a wet area, or one that was fastened to studs spaced too far apart.
- Discoloration, bubbling paint, or a musty smell on the wall opposite the shower. Moisture has migrated through the assembly. Long Beach’s marine air makes this worse in bathrooms with poor ventilation.
- Visible swelling or crumbling at a panel edge near the floor or a valve cutout. The core is exposed and drinking water. This is the point where a patch stops being honest and a section replacement makes more sense.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For CertainTeed-based bathroom work in Long Beach, here’s how the numbers break down. A full bathroom remodel with new backer panels behind new tile runs $9,000 to $28,000 installed. A small bathroom remodel lands between $5,000 and $12,000. If the panel failure is isolated to a shower wall and the fixtures and floor are sound, a targeted shower replacement runs $3,000 to $8,500, and a walk-in shower installation from scratch runs $4,500 to $12,000. A tub-to-shower conversion, which is often the moment owners discover the panel behind the tub surround, runs $3,500 to $10,000.
What drives the range: panel size and thickness, how much of the existing assembly has to come out, whether the studs need sistering or the subfloor needs repair, tile selection and the fixture grade you choose. We hand you a written price before any work starts, itemized so you can see the panels and fasteners line by line rather than buried in a lump sum. The number on day one is the number on the invoice. Every project is covered by our 365-Day Done Right Promise: if something we installed fails inside that year, we come back and fix it at no charge, and that commitment is in writing.
DIY or Call Us?
There’s real value in what you can safely check yourself. An owner can look for the board stamp, measure panel thickness at an exposed edge, confirm stud spacing with a stud finder, and photograph the grout cracks so you can show us exactly where the problem lives. That information makes the estimate sharper.
Where DIY goes wrong is at the point of removal. Prying off tile and backer to see what’s behind it is how a small panel repair turns into a full shower rebuild, and it’s easy to damage the tub, the valve, the drain connection and the adjacent drywall in the process. We’ve also seen plenty of re-dos where a homeowner or a previous contractor used the wrong panel thickness or fastened it on too-wide stud spacing, and the tile cracked within a season. If the wall is soft or the grout keeps reopening, the sensible next step is an inspection, not a pry bar. Call us at (833) 510-6967 and we’ll tell you straight whether it’s a patch or a rebuild. Estimates are free.
FAQs

A properly installed backer panel, on studs at the correct spacing with the joints taped and sealed, should serve the life of the tile job, which in practice is 20 to 30 years. The failures we see aren’t the panel’s fault so much as the assembly’s: missed fastener spacing, unsealed joints, or a standard gypsum board used where a wet-area panel belonged. Call (833) 510-6967 for an inspection if your tile is older than that or has started moving.
Often yes. If the water damage is confined to one section, we can sometimes cut out the failed panel, replace it with a matched panel, and re-tile just that area. A full rebuild usually makes more sense when moisture has spread along a whole shower wall or the subfloor has softened. We’ll tell you which case you’re in after we look at it, and give you a written price either way.
A targeted shower panel and tile repair is typically a few days on site. A full bathroom remodel in Long Beach usually takes two to four weeks, with the bulk of the time going to panel installation, waterproofing and tile setting, since each layer needs to cure before the next goes on. We give you a defined arrival window and a written schedule before work starts.
We match the panel to your existing assembly by product name, thickness and fastening schedule, then order it from a recognized supplier for delivery on the job, timed to the schedule. We also work with KraftMaid, Cambria and Silestone for cabinetry and countertop components when a bathroom remodel includes them, so the whole job stays on one written plan. We don’t claim to stock parts or carry them on a truck; when a part needs to match a specific assembly, we source it to spec.
If you’ve found soft spots, a recurring grout crack, or tiles that no longer sit flat, the answer is a look, not a guess. We give you a written price before any work starts, send background-checked technicians in uniform, and back the work with our 365-Day Done Right Promise. A live person answers our line around the clock. Call (833) 510-6967 today to schedule your free estimate for your Long Beach bathroom.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












