A Penhallow company - serving Long Beach, CA
An open living room and dining area after a whole-home remodel
C
CWS · Long Beach

CWS Windows & Doors in Long Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Windows & Doors: The Long Beach Owner’s Guide

We install, repair and replace CWS-compatible windows and doors across Long Beach, and typical installed pricing runs $4,500 – $15,000 for window replacement and $8,000 – $25,000 for impact window installation, with written pricing before any work starts. Most owners don’t go looking for a part until something stops doing its job: a sash that won’t stay up, a door that drags on the sill, or a hinge-side gap that lets the marine air in. By the time you’re reading this, you’ve usually already tried the reset, the lubrication, or the “close it gently” routine, and the problem came back. That’s normal. Coastal Long Beach homes take a beating from salt air and year-round humidity, and window hardware wears out on a predictable schedule.

Call (833) 510-6967

Which CWS Models This Applies To

A built-in window seat in a bay window

CWS has made windows and doors across several product lines over the years, and the part you need depends on the series, not just the brand name. The good news is that most CWS units carry a manufacturer’s label in the frame channel or on the sash edge, stamped with the series or model identifier and a date code. Pull that label information before you order anything. If the label is gone, we identify the unit by measuring the visible glass, the frame depth, and the balance or hinge configuration.

OEM versus aftermarket is the real decision. For balance assemblies, rollers, and weatherstrip specifically tuned to a CWS profile, OEM is worth the wait. For hinge sets, sill hardware, and screening, a quality aftermarket equivalent matched to the profile works well and saves money. Compatibility gotchas worth knowing: CWS vinyl single-hung and double-hung units often use a specific balance shoe depth that a generic replacement won’t seat correctly, and CWS patio door rollers vary by track width by as little as a sixteenth of an inch. We’re an independent service provider, not affiliated with CWS, so we source parts by spec rather than by badge. Long Beach homes built in the 1980s and 1990s frequently have the older CWS profiles that are the hardest to match off the shelf.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Windows & Doors Is Failing

  • The sash won’t stay open. The balance spring or block has lost tension, and the window drops as soon as you let go. This is the single most common CWS failure we see in Long Beach, and it’s almost always the balance rather than the sash itself.
  • The door drags or scrapes the sill. A worn or seized roller, or a hinge that has worked loose from the frame, is usually the cause. Left alone, the drag chews into the threshold and turns a small fix into a bigger one.
  • You feel a draft with the window closed. The weatherstrip has flattened or pulled from the channel. Salt air and sun dry the seal out faster in coastal Long Beach than inland, and the gap opens slowly enough that you notice the noise before the draft.
  • Condensation between the panes. The sealed glass unit has failed and the desiccant is saturated, which means the unit needs replacement, not just new hardware.
  • The lock won’t catch or the latch misaligns. Worn strike plates and hardware that has shifted with the frame are the usual culprits, and it’s a security gap you don’t want to sit on.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A powder room with botanical wallpaper and a stone sink

For Long Beach, window replacement typically runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000. Single-part hardware swaps cost far less than a full unit replacement, and we give you a written line-item price so you can see parts and labor separately. What drives the number: the series and how hard the part is to source, how many units are affected, whether the frame needs adjustment or the glass unit has to be replaced, and whether impact-rated hardware is required.

Every job comes with a written price before any work starts, technicians who are background-checked and arrive in uniform, and our 365-Day Done Right Promise in writing. If something we install fails inside the year, we come back and fix it at no charge, no service call fee. We also install KraftMaid, Cambria and Silestone cabinetry and stone if your project turns into a larger remodel, but window and door work stands on its own.

DIY or Call Us?

You can safely check the obvious things yourself: read the label, measure the visible glass and frame depth, look for a seized roller or a loose hinge screw, and note whether the balance moves at all. Where DIY goes wrong on windows and doors is anything involving tension, glass, or frame adjustment. Balance assemblies are under load, and a released spring can snap back hard; impact glass and sealed units are heavy and unforgiving if they slip. A mis-seated balance or a frame that’s out of square will fail again quickly. If you’ve reset it once and it failed, that’s your signal. Call (833) 510-6967 and we’ll schedule a free estimate and talk through the part you need.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

How long do CWS windows and doors last in Long Beach? Glass and frames typically hold up for 20 to 30 years, but hardware like balances, rollers, and weatherstrip usually needs replacing in 8 to 12 years in coastal Long Beach conditions. If you’re past that and the sash or door is dragging, the part is the fix, not the whole unit.

Can the part be repaired instead of replaced? Often, yes. A balance can sometimes be re-tensioned, a roller cleaned and re-seated, and weatherstrip refreshed, all for far less than a full replacement. We’ll tell you honestly whether a repair will hold or whether the failure is structural. Call (833) 510-6967 for an exact quote, and estimates are free.

How long does the swap take? Most single-part swaps, like a balance or roller replacement, take under an hour per unit. A full window replacement or a sealed glass unit swap is a larger job, and we give you a real arrival window and a written price before we start so you know what to expect.

How do you source the right CWS part? We match the part to your unit by label information, glass measurement, frame depth, and hardware configuration, not just the brand name. We don’t stock parts or carry them on a truck; we order the correct spec once we’ve identified it, so the part fits the first time.

Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.

Ready to price your CWS window or door work? Call (833) 510-6967 for a free estimate. A live person answers 24/7, and we put the price in writing before any work starts, backed by our 365-Day Done Right Promise.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-6967
Local Service Coverage

Request a Free Estimate in Long Beach

Tell us what you need - Penhallow Remodeling Long Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch