







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Long Beach Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Long Beach: kitchens, bathrooms, and standing seam metal roofing built to Dvele’s panel and module tolerances rather than field-built slack. Dvele homes are precision-assembled, so finish work has to line up with factory edges, not be forced to fit with trim and caulk. We’re an independent local remodeling provider, not affiliated with or authorized by Dvele. Call (833) 510-6967 for a written price before any work starts.
Long Beach is a coastal, heavily regulated port city, and that shapes Dvele work here more than it does inland. A kitchen in a shoreline neighborhood may sit in a coastal-zone overlay that pulls in California Coastal Commission review on top of city building review, while the same scope a few miles inland follows a shorter path. Add marine air, salt, and liquefaction-prone ground near the Port and you get a housing stock where Dvele panels, fasteners, and flashing all have to be specified for the coast, not the valley.
Why Trust Penhallow Remodeling Long Beach for Your Dvele Construction?

Our technicians have up to 22 years of experience, and the ones who work on Dvele structures read the panel and module spec sheets directly instead of guessing at what’s behind the drywall. That matters because a Dvele home isn’t a stick-built job with a different label. Stud spacing, panel joints, and connector locations are set by the factory. A cabinet that hangs fine on 16-inch-on-center framing can rack and gap when the mounting points don’t line up, so we map the panel layout before we drill anything.
Where structure is concerned, we use Dvele OEM panels, connectors, and factory-specified trim. Where code and fit allow, we use matching-profile or quality aftermarket hardware, glass, and cabinetry. That split protects the panel system and keeps the warranty conversation clean. Every job gets a written price before work starts, a real arrival window, and our 365-Day Done Right Promise in writing. Background-checked, uniformed technicians show up on every visit, and a live person answers the phone 24/7. Each Penhallow location is independently owned and operated as part of the Kingswell family of companies, operating to The Kingswell Way since 2004.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Long Beach
These are the Dvele failure modes we see most in Long Beach. None of them are mysterious once you understand how the panels move.
- Seam movement telegraphing through tile. Module-to-module and panel-to-foundation joints move slightly with seasonal temperature and soil moisture. When the original install laid tile, a backsplash, or a shower wall rigidly across that joint, the movement shows up as hairline cracks. The fix is a control joint or slip plane at the seam, not another layer of caulk.
- Out-of-plumb factory wall panels at cabinet and vanity mounting points. Dvele’s factory-finished wall panels can arrive slightly out of plumb with inconsistent stud spacing at the exact spots where cabinets and vanities hang. The result is racked cabinet boxes and a gap at the countertop wall. We shim and sister the mounting points to the panel system, then set the box true.
- Roof-to-wall and module-to-module roof transitions leaking. Flashing laps and sealant detailing at Dvele’s roof transitions are where marine air and heavy winter rain find weakness. On standing seam and other metal roofing, a failed lap at a module seam produces a leak that travels far from where it enters.
- Flat-panel modular cabinetry swelling at sink and shower splash zones. Dvele’s flat-panel modular cabinet and vanity runs delaminate or swell where moisture management and caulking at panel joints gets skipped. Coastal humidity accelerates it. Proper backer, sealant, and a splash-rated panel edge stop it.
- Corrosion at coastal fasteners and penetrations. Salt-laden air eats standard fasteners and unsealed metal penetrations faster than most homeowners expect. Any roof or wall penetration we touch gets a fastener and sealant rated for the coast.
A common Dvele problem is a kitchen or bath finish failing along a module joint: hairline cracks in tile, a backsplash separating from the wall, or a vanity pulling away. The panel seam moved and the original install spanned it rigidly. A qualified local pro maps the panel layout first, isolates the seam with a proper control joint or slip plane, then re-sets cabinetry, countertops, or tile with substrates and fasteners rated for the Dvele panel system. Where the same movement shows at a roof-to-wall transition, the usual fix is re-detailing the flashing lap and sealant rather than coating the leak.
Dvele Parts & Our Repair-vs-Replace Approach

Parts get sourced per job, matched to your Dvele model and spec. We don’t claim to stock Dvele parts locally, and we won’t pretend a generic connector is the same as the factory one. For anything structural, OEM Dvele panels, connectors, and factory-specified trim are the only right answer. For hardware, glass, and cabinetry where code and fit allow, matching-profile or quality aftermarket parts keep the job practical without compromising the system.
Cosmetic seam issues are repairable. A hairline crack at a control joint, a backsplash that needs re-setting, a vanity re-hung to true: those are fixable and we’ll tell you so. Compromised structural connectors or a failed module-to-module weather seal are a different conversation. Patching those hides a problem that comes back. That’s when replacement or a manufacturer-level fix is the honest call, and we’ll say that even when the smaller repair would be easier to sell you. Call (833) 510-6967 and we’ll look at the actual condition before recommending either path.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We inspect the Dvele structure before quoting, mapping panel and module layout, checking plumb and stud spacing at mounting points, and tracing roof-to-wall flashing. You get a written scope and a written price before any work starts.
- 2
Repair or install. We isolate seams with control joints, set substrates and fasteners rated for the Dvele panel system, and use OEM connectors where structure is involved. Cabinets, counters, and tile go in true to the factory edges.
- 3
Test and detail. Water test at shower and roof, check door and cabinet action, and confirm the flashing lap and sealant detailing hold at every module transition.
- 4
Warranty and handoff. Every job carries our written guarantee and the 365-Day Done Right Promise: if the work fails inside the guarantee period, we come back and fix it at no charge. If a repair fails, the return visit is free.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Long Beach
We work across Dvele’s prefabricated single-family home modules, panelized wall and floor systems, modular ADU builds, and addition or expansion modules. On those structures we handle full kitchen remodeling, full bathroom remodeling, and standing seam metal roofing, plus the finish work that ties them in: cabinetry, countertops, backsplashes, vanities, and walk-in showers. In Long Beach, where a lot of Dvele scope is additions and ADU conversions on older lots, we also plan for the framing and foundation era of the existing house the module ties into, since the two constructions don’t move the same way.
We Also Service These Brands
Dvele is one system among many. We also install and service KraftMaid cabinetry, Cambria quartz, Silestone surfaces, and Kohler fixtures, drawn from industry-recognized brands so the products behind the guarantee match the promise. If your Long Beach home mixes Dvele structure with conventional cabinetry and surfaces, we handle both sides of that line without handing you off to a second contractor.
FAQs – Dvele Construction Service in Long Beach

Is Penhallow Remodeling Long Beach authorized by Dvele? No. We’re an independent Dvele service provider, not affiliated with or authorized by the manufacturer. We read Dvele’s panel and module specs directly and adapt standard finish trades to that system, which is what a precision-built home needs.
Do you use genuine Dvele/OEM parts? Yes for structure. OEM Dvele panels, connectors, and factory-specified trim go in wherever the panel system is involved. Hardware, glass, and cabinetry can be matching-profile or quality aftermarket where code and fit allow.
How long does Dvele service take? A repair like re-setting a vanity or re-detailing flashing is often a day or two. A full kitchen or bath remodel on a Dvele structure runs weeks, depending on cabinet line, countertop material, and whether coastal-zone review applies to your Long Beach address. We give you a written schedule with the written price.
What Dvele models/series do you cover? Dvele prefabricated single-family home modules, panelized wall and floor systems, modular ADU builds, and addition or expansion modules. If you’re unsure which your home uses, tell us at the estimate and we’ll map it.
Will service void my Dvele warranty? Not when it’s done right. Using OEM structural parts and working within the panel system keeps the warranty intact. Cutting into panels improperly or spanning seams rigidly is what creates problems. We document what we did and why.
How much does Dvele construction cost in Long Beach? Typical ranges for Dvele finish work in Long Beach run from $800 for a backsplash up to $45,000 for a full kitchen and $40,000 for standing seam metal roofing; the table below breaks it down line by line. Call (833) 510-6967 for an exact quote on your Dvele project, estimates are free.
| Dvele Service in Long Beach | Typical Price Range |
|---|---|
| Kitchen Remodel | $14000 – $45000 |
| Small Kitchen Remodel | $9000 – $20000 |
| Cabinet Installation | $4000 – $13000 |
| Countertop Installation | $2000 – $6500 |
| Backsplash Installation | $800 – $2500 |
| Kitchen Island Installation | $3000 – $10000 |
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Vanity Installation | $800 – $3000 |
| Roof Replacement | $8000 – $20000 |
| Roof Repair | $400 – $1800 |
| Metal Roof Installation | $15000 – $40000 |
| Standing Seam Metal Roof | $15000 – $40000 |
Book Your Dvele Service in Long Beach, CA
Tell us what’s failing or what you want changed, and we’ll come out, look at the actual Dvele structure, and put a written price in your hands before work starts. Call (833) 510-6967 for a free estimate on your Dvele construction in Long Beach. A real person answers, day or night.
Written by the team at Penhallow Remodeling Long Beach.












