







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Driveway & Pavers: The Long Beach Owner’s Guide
GAF is a roofing and waterproofing brand, not a paver manufacturer. So if you landed here searching for “GAF driveway and pavers,” here’s the honest answer first: GAF makes roofing underlayments, shingles, and leak barriers that often meet paver work at the roof-to-deck junction, but the pavers themselves come from brands like Belgard and Unilock. If your driveway or paver surface is failing and GAF appears somewhere in the paperwork, you’re likely looking at a GAF roof deck or waterproofing membrane detail at the edge of the hardscape, not a GAF-manufactured paver. In Long Beach, paver driveway installation typically runs $7,000 – $18,000 for full replacement, and we’re glad to look at what you have before you spend a dollar.
Owners usually discover the problem the same way. Water pools at the garage threshold after a rain, a GAF membrane detail at the roof-to-drive transition starts lifting, or joints between pavers wash out with sand and you can see the base course underneath. Some find it when a paver rocks underfoot and won’t seat. We see all three regularly in Long Beach, especially on the flat, low-slope lots that are common west of the 710.
Which GAF Models This Applies To

GAF’s relevant product families for hardscape-adjacent work are its roofing underlayments and waterproofing membranes, and the model designation matters because they’re spec’d differently at the perimeter. GAF’s roofing product lines (Timberline shingles, for example) include eave and valley membrane systems, and GAF’s Deck-Armor and similar underlayment products show up as the moisture barrier at the roof-to-hardscape junction. If you have a roofing invoice or product label from a GAF line, look for the product name and a series or SKU on the bundle wrapper or the underlayment roll end. That’s the identifier a supply house needs.
On the paver side, the actual matching work is for the paver brand and size: standard 4×8 units versus 6×9 or larger format, and the base course spec. Measure a single paver face-to-face and note the thickness. GAF-sourced material at the roof edge is typically replaced to the original membrane model; aftermarket equivalents exist, but the safe call for a waterproofing detail under a Long Beach marine-layer climate is to match the original spec rather than substitute. We source to the brand specified, not to whatever’s cheapest that day. We also work with KraftMaid, Cambria, and Silestone on the interior side of your remodel, if that’s part of the bigger picture.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Driveway & Pavers Is Failing
- Water pooling at the garage threshold. Poor slope or a failed perimeter membrane lets rain collect instead of draining. In Long Beach’s flat-lot neighborhoods, an inch of lost grade sends water under the garage slab.
- Pavers rocking or settling unevenly. The base course (the compacted stone layer under the pavers) has shifted or eroded. This is the most common failure on driveways older than 15 – 20 years.
- Joint sand washing out. Sand runs out with every storm if the joint pattern or drainage is wrong. If you’re re-sanding twice a season, the base is moving.
- Lifting or curling membrane at the roof-to-drive junction. A GAF underlayment detail debonding from the substrate. It’s a small, specific repair and easy to miss until the leak reaches the garage ceiling.
- Cracked or spalled pavers with visible color loss. UV and salt air wear on the surface. Long Beach coastal air is hard on unsealed pavers, and once the surface goes, sealers won’t bring it back.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Work | Long Beach Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, base-course depth (a driveway over a weak subgrade needs more compacted stone), whether the failing area is a spot repair or full replacement, and whether a GAF membrane detail at the roof edge is part of the job. We give you a written price before any work starts, itemized by material and labor, so the number on day one is the number on the invoice. Every job carries our 365-Day Done Right Promise in writing, and a free return visit if the work fails, no service call or re-inspection fee. Paver materials come from Belgard and Unilock standards.
DIY or Call Us?
What you can check yourself, safely: measure the paver face and thickness, photograph any lifting membrane at the roof edge, note where water pools after rain, and check whether the base course is exposed. Those details help us quote accurately by phone. Where DIY goes wrong with pavers: base compaction. The single most common reason a driveway fails in three years instead of twenty-five is an under-compacted base, and a hand tamper won’t do what a plate compactor will. You can also turn a small GAF membrane repair at the roof edge into a water intrusion problem if the substrate isn’t dried and prepped to spec. Paver work is not a dangerous DIY task in the way roofing can be, but the failure mode is a $7,000 mistake. Call (833) 510-6967 and we’ll tell you straight whether you need a spot repair or a replacement.
FAQs

How long does a paver driveway last in Long Beach? A properly installed paver driveway with a compacted base and correct drainage holds up 25 to 30 years. In Long Beach’s coastal air, the surface sealer needs redoing every 3 to 5 years to protect color and resist salt wear. Call (833) 510-6967 for an exact quote; estimates are free.
Can the failing area be repaired instead of replaced? Often, yes. A single settled section, a washed-out joint pattern, or a lifting GAF membrane at the roof edge can be repaired without tearing up the whole driveway. We inspect and tell you honestly which route makes sense. Call (833) 510-6967 to schedule the look.
How long does the swap or repair take? A localized paver repair or membrane detail runs a single day. A full paver driveway replacement typically takes 3 to 5 days depending on square footage and base prep. We confirm the timeline in the written price before we start.
How do you source the right GAF and paver material? We match the original GAF product model from the invoice or product label, and specify the paver brand and size to what’s already installed. We source to the brand specified, not a generic substitute. Call (833) 510-6967 and bring your paperwork; we’ll identify what you have.
Call (833) 510-6967 for a free estimate. A live person answers around the clock, and we’ll give you a written price before any work starts.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












