







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Driveway & Pavers: The Long Beach Owner’s Guide
Penhallow Remodeling Long Beach installs IKO-compatible driveway and paver systems across Long Beach, with paver driveway installation typically running $7,000 – $18,000 and sealing running $250 – $700. Most homeowners discover the problem the same way: a hairline crack that reappears after every rain, or pavers near the garage that heave out of level because the base underneath them stopped draining properly. In Long Beach, that’s rarely a surface issue. It’s almost always what’s happening below.
Key Takeaways
- Paver driveway installation in Long Beach runs $7,000 – $18,000 installed.
- Driveway sealing costs $250 – $700 and is the cheapest way to slow surface failure.
- IKO’s system is a layered one (base, drainage, surface units), so “failed pavers” usually means failed base prep.
- We’re an independent contractor, not affiliated with IKO. We install IKO-compatible systems and identify the right match to your existing product.
- Estimates are free and written before any work starts.
Which IKO Models This Applies To

IKO products reach Long Beach homeowners through two main channels: paver and hardscape units imported and distributed under the IKO banner, and IKO-adjacent driveway surfacing components sold through regional hardscape dealers. That matters because the “part” a Long Beach owner usually needs isn’t a numbered component from a schematic. It’s a matching surface unit, a compatible base aggregate, or a joint-sand spec that works with what’s already installed.
Here’s the compatibility gotcha: IKO pavers ship in nominal thicknesses (commonly 60mm and 80mm profiles) and their color batches shift slightly between production runs. If you replace four pavers from a new batch, they can read as a visible patch even though the SKU matches. The reliable move is to identify the original batch from the installer’s paperwork or the pallet label, then match thickness and chamfer before you match color.
OEM-vs-aftermarket: for IKO systems, the base and drainage layers should stay spec-identical to the original install. Surface units can often be substituted with a compatible aftermarket paver of the same thickness and edge detail if the original line is discontinued, which happens more than you’d think on older Long Beach installs. We’ll tell you honestly which components need the exact IKO match and which can flex.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Driveway & Pavers Is Failing
- Recurring cracks along the same line. The crack tracks a seam or a point load (usually the driveway apron where the car turns), which means the base didn’t compact evenly. Patching the crack alone won’t stop it from returning.
- Pavers rocking or dipping near the garage apron. Water is getting under the surface and washing out the bedding layer. In Long Beach, this often shows up first where the driveway meets the garage slab, since that junction takes the most runoff.
- Color fading or efflorescence (white mineral haze) that won’t wash off. The surface finish has begun to degrade, or trapped moisture is migrating through the units. Sealing slows it; it doesn’t restore a failed finish.
- Joint sand washing out after rain. The joint sand is too fine or was never stabilized. That’s a sign the system wasn’t finished to spec, and it accelerates the problem above.
- Weeds pushing up between units within a season. Organic material has colonized the joint and the drainage layer below is clogged. This is a base failure showing through the joints, not a weed problem.
Replacement Cost & What’s Included

In Long Beach, paver driveway installation runs $7,000 – $18,000 installed, and driveway sealing runs $250 – $700. What pushes you toward the top of that range: square footage, whether the existing base can be reused or must be excavated and re-compacted, drainage correction (French drain or regrade to the street), and whether you need to match a discontinued surface unit.
Every quote breaks out materials and labor separately, so you see what the IKO-compatible surface units cost versus the base prep and install. The number you get in writing before work starts is the number on the invoice. Every install carries a written guarantee, and if something fails inside the guarantee period we come back and fix it at no charge under the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do a few things: pull a loose paver and look at what’s underneath, check whether the joint sand is stabilized or loose, and hose the driveway to see where water actually pools. That last one tells you more than any inspection fee will.
Where DIY goes wrong: re-laying a paver without re-compacting the base, which fails again in one Long Beach wet season. And any driveway drainage work that ties into the garage slab is a job for someone who’ll pull the permits and stand behind it. If you’re seeing cracks that keep coming back or pavers that rock, call (833) 510-6967 for a free written estimate.
FAQs

A properly prepped IKO paver driveway should hold up for 25 to 30 years or more, but that lifespan depends almost entirely on base prep and drainage, not the surface unit itself. Coastal humidity in Long Beach makes drainage the deciding factor. Call (833) 510-6967 for an exact assessment – estimates are free.
Often yes. If the failure is isolated to a few units or a single drainage point, we can lift, correct the base and reset a match, which costs far less than a full replacement. Recurring cracks along a full seam usually mean full rebuild. We’ll tell you which one you’re looking at.
A local repair on a handful of units is a one-day job. A full IKO-compatible paver driveway install in Long Beach typically takes 3 to 5 days, depending on square footage and whether the base needs excavation. Sealing is a single-day job. Call (833) 510-6967 to get a written timeline with your estimate.
We identify your existing batch and thickness from pallet labels or installer paperwork, then source from hardscape distributors who stock IKO-compatible units and base aggregates. We don’t carry parts on a truck, so the match is confirmed before we order. Call (833) 510-6967 to start with a free estimate.
We also install cabinetry and stone from KraftMaid, Cambria, and Silestone on kitchen and bath projects across Long Beach, and we’re an independent contractor, not affiliated with IKO.
Get a Written Price Before Any Work Starts
If your IKO driveway or pavers are cracking, rocking, or letting water through, the fastest way to know what it’ll cost is a free written estimate. Call Penhallow Remodeling Long Beach at (833) 510-6967 – a live person answers 24/7, we’ll schedule a visit within a real window, and you’ll get the number in writing before we touch a thing. Our technicians have up to 22 years of experience, every tech is background-checked and arrives in uniform, and every job is backed by the 365-Day Done Right Promise and The Kingswell Way: say the price before the work, show up in the window we gave, leave it cleaner than we found it.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












