







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Long Beach Owner’s Guide
Kohler-tied home additions and ADUs in Long Beach typically run $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU, with the fixture package (Kohler toilet, sink, shower valve and trim) built into the written price before work starts. We install Kohler fixtures as part of the build, not as an afterthought. That matters because most failed additions and ADU builds don’t fail at the framing stage. They fail at the wet wall: a shower valve that drips six months after the tile goes up, a toilet that rocks on an uneven closet flange, a sink drain that weeps into the cabinet floor. Long Beach owners usually find out when a downstairs ceiling stains, a baseboard swells, or a bathroom door starts sticking from hidden moisture.
Which Kohler Models This Applies To
Kohler fixture lines aren’t interchangeable, and the model number on the box is what tells you what you’re dealing with. The most common residential lines in a Long Beach addition or ADU are the Memoirs and Persuade toilets, the Archer and Verticyl sinks, and the Rite-Temp and Katalyst shower valves and trim. Each has a rough-in spec that has to match the plumbing you’re installing: toilet rough-in is usually 12 inches but some Kohler models offer 10- and 14-inch options, and a mismatch means the toilet sits off the wall or crowds the door swing. Shower valves differ by series (Rite-Temp versus older 1/2-inch thermostatic bodies), and trim kits from one series won’t fit another. Check the label inside the tank lid, under the sink rim, or on the valve body behind the trim plate. For an OEM-versus-aftermarket call on Kohler specifically: the valve cartridge and the flush valve are the two places we stay OEM, because aftermarket copies of the Rite-Temp cartridge and the AquaPiston can. Washlet seats and trim can go aftermarket if the buyer wants to save, but the wet parts are where Kohler’s own parts hold up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
An addition or ADU doesn’t fail all at once. It shows you the failure through the Kohler fixtures you put in it. These are the five symptoms Long Beach owners call us about most:
- Shower valve drips or won’t shut off. The Rite-Temp cartridge has a worn seal or mineral buildup from hard water. In an addition with a slab or second-floor wet wall, that drip finds drywall fast.
- Toilet runs or refills on its own. Usually the AquaPiston can or the fill valve, not the toilet itself. A running Kohler in an ADU can add real money to a tenant’s water bill before anyone notices.
- Water stain on the ceiling below. This is the failure that points back to a Kohler drain or supply connection in the new bathroom. In Long Beach, the ceiling stain shows up after the first heavy rain or the first hot week when the joint expands.
- Toilet rocks or leaks at the base. A closet flange set too high or too low during the addition, or a wax ring that didn’t seat. Rocking eventually breaks the seal and the leak goes into the floor.
- Sink drains slowly and the cabinet floor is damp. A tailpiece or P-trap joint that wasn’t tightened to spec on the Kohler sink. Slow drain plus damp cabinet means a leak, not a clog.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a home addition in Long Beach, plan on $45,000 – $130,000. For an ADU, $90,000 – $220,000. Those numbers assume a Kohler fixture package in the new bathroom or bathrooms, and they’re broken out line by line in the written price we give you before any work starts. What drives the range: foundation and grading, whether the ADU is detached or attached, the number of bathrooms, and how much Kohler fixture you spec (a basic Memoirs toilet and Archer sink versus a full Katalyst shower system). A garage conversion runs $30,000 – $80,000 and is often the cheapest path to an ADU if your Long Beach lot has the garage and the setback. Parts plus labor are shown separately so you can see what the Kohler cartridge or the closet flange actually costs versus the install. Every job carries the 365-Day Done Right Promise: if a Kohler fixture or a drain we installed fails inside that year, we come back and fix it at no charge. The first return visit is free either way, and that’s in writing.
DIY or Call Us?
What you can safely check yourself: the model number on the tank lid or sink rim, whether the toilet rocks when you sit on it, whether the shower valve drips with the handle fully off, and whether the cabinet under the sink is damp. Take a photo. That’s information we can use.
Where DIY goes wrong: the shower valve cartridge and the closet flange. The Rite-Temp cartridge sits behind the trim plate and needs a specific removal tool and the water shut off at the right valve; force it and you crack the valve body inside the wet wall, which means opening the tile. The closet flange is worse because reseating it means pulling the toilet and resetting the wax ring, and if the flange is wrong you’re into the floor, not just the fixture. Neither is a weekend job for a first-timer. Call (833) 510-6967 and we’ll tell you honestly whether it’s a cartridge, a flange, or something else, and what the fix costs.
FAQs

How long should a Kohler fixture last in a Long Beach addition or ADU? A Kohler toilet or sink body should last 20 years or more. The cartridge, flush valve, and wax ring are the wear parts and typically go 5 – 15 years depending on the water. Long Beach water runs hard, so mineral buildup shortens cartridge life; a shower used every day in an ADU will need the cartridge sooner than one in a guest bath.
Can the Kohler part be repaired instead of replaced? Often yes. A dripping Rite-Temp valve is usually a cartridge replacement, not a whole-valve swap, and a running AquaPiston toilet is usually a can and seal kit. The exception is a cracked valve body or a broken closet flange, which needs more than a part. Call (833) 510-6967 for an exact quote, and estimates are free.
How long does the swap take? A cartridge or flush valve is a same-visit repair, usually under an hour once the water’s off. Pulling and resetting a toilet on a new wax ring is a few hours if the flange is sound. If the flange or wet wall is the problem, we’ll tell you before we start, not after.
How do you source the Kohler part? We source from Kohler and recognized trade suppliers by the model number off your fixture, so the part matches the series. We don’t claim to stock parts or carry them on the truck; we confirm the part, get it in hand, and give you a real arrival window. We’re an independent service provider, not affiliated with Kohler. We also fit KraftMaid cabinetry and Cambria and Silestone countertops into additions and ADUs when the scope includes a kitchenette or a full kitchen.
Penhallow Remodeling Long Beach works to the Kingswell standard: written price before work starts, a real arrival window, background-checked and uniformed technicians, and a live person answering the phone 24/7. Each Penhallow location is independently owned and operated as part of the Kingswell family of companies. If you’re building an addition or ADU in Long Beach and want the Kohler side done right, call (833) 510-6967 to schedule your free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












