







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Long Beach Owner’s Guide
We install and repair Mr-Glass-compatible windows and doors for homeowners across Long Beach, with full window replacement typically running $4,500 – $15,000 and impact window installation $8,000 – $25,000 depending on the number of openings and frame specs. We’re an independent service provider, not affiliated with Mr-Glass, but our technicians have up to 22 years of experience matching parts to the right series. Most Long Beach owners discover a failing part the same way: a window that sticks halfway up in August, a door that won’t latch after the marine layer rolls in, or fog between glass panes that never clears. Call (833) 510-6967 for a free estimate and a written price before anything gets ordered.
Which Mr-Glass Models This Applies To

Mr-Glass hardware isn’t universal. The series matters more than the brand name on the glass, and the wrong part will bolt on but won’t seal or operate correctly. Here’s how to identify what you actually have:
- Find the label. Mr-Glass stamps a series or model code on the window sash edge, inside the frame channel, or on a sticker tucked behind the screen. Photograph it before you call anyone.
- Check the operator hardware. Casement and awning units use a specific roto-gear and arm length that varies by sash size. Measure the visible arm, not the whole assembly.
- Rollers and tracks differ by door weight. Sliding patio doors have at least three common roller profiles, and the tandem vs. single roller choice changes how smoothly a heavy glass panel tracks.
- Glass spec matters in Long Beach. Coastal homes near Belmont Shore and Alamitos Bay see salt air and constant humidity, so Low-E and laminated impact glass specs need to match what the frame was engineered for. A mismatched unit can void the assembly’s performance.
On the OEM-versus-aftermarket question: Mr-Glass factory parts fit guaranteed but cost more and can take longer to arrive. Quality aftermarket equivalents from established hardware makers often run 20 – 40% less and perform identically when the spec is matched correctly. We quote both, in writing, so you choose with the numbers in front of you. If you also have KraftMaid, Cambria, or Silestone finishes in the same room, we can coordinate the whole job under one written price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
Failures show up gradually, then all at once. Watch for these five:
- Fogging or condensation between panes. The sealed insulated glass unit (IGU) has lost its gas fill and moisture barrier. Once that seal breaks, no amount of wiping fixes it; the glass unit needs replacement.
- Sticking or hard-to-crank operators. The roto-gear, crank, or hinge is worn or misaligned. Left alone, a forced crank can crack the sash or strip the gear entirely.
- Doors that drag or won’t latch. Worn rollers or a sagging track, usually from years of Long Beach humidity swelling the frame or loosening the anchors. A dragging door is also a security gap.
- Drafts, water intrusion, or a whistling seal. Failed weatherstripping or a warped sash lets in both air and moisture. In our coastal climate, that moisture works on the frame and surrounding drywall.
- Cracks, chips, or a cloudy impact pane. Impact-rated laminated glass near the coast can delaminate or chip over time. Any break compromises the safety rating the window was installed for.
Replacement Cost & What’s Included

Long Beach window and door work falls into clear ranges based on scope and glass type. Every price we give is written before work starts, so the number on day one is the number on the invoice.
- Window replacement (standard, per-opening view): $4,500 – $15,000 for a typical whole-side or multi-window project.
- Impact window installation (laminated, coastal-spec): $8,000 – $25,000, driven by opening count, frame material, and glass rating.
- Door and hardware service (rollers, operators, seals): quoted line by line, parts and labor shown separately.
What moves the range up: impact-rated glass for hurricane and coastal zones, custom frame sizes, second-story access, and stucco repair after removal. What keeps it down: standard sizes, single-story access, and keeping existing trim intact. Our prices include removing the old unit, disposal, sealing, and cleanup, and the work is backed by our 365-Day Done Right Promise: if it’s not done right, we come back and make it right at no charge, in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can check safely. Confirm the series code, measure your sash or opening, tighten visible roller screws, and clean the tracks. That’s information gathering, and it’s useful.
Where DIY goes wrong: replacing a sealed glass unit means handling a heavy, fragile, gas-filled pane that has to seat perfectly or it fogs again; adjusting a misaligned sliding door can send a glass panel off its track; and any break in impact-rated glass near the coast means a safety-rated window is no longer doing its job. Windows and doors are heavy, and a dropped sash is a hazard to you and the floor beneath it. This is where a trained professional earns the call. Call (833) 510-6967 and we’ll tell you plainly whether your job is a five-minute fix or a real replacement, with a free estimate either way.
FAQs

Factory-sealed glass units typically hold their seal 10 to 20 years, and coastal humidity plus salt air near the water tends to push Long Beach units toward the shorter end. Mechanical parts like rollers and operators usually wear out faster, often within 8 to 15 years of daily use. Call (833) 510-6967 for an exact quote on your specific window or door; estimates are free.
Sometimes yes. Worn rollers, weatherstripping, and operators can often be replaced without touching the glass, which keeps the cost down. Fogged or cracked glass units generally need full replacement since the seal can’t be restored. We’ll tell you honestly which one your window or door needs.
A single hardware or roller replacement is usually a short job, and a full window replacement is typically half a day to a full day per set of openings depending on access and stucco repair. We give you a real arrival window and stick to it. Call (833) 510-6967 to schedule your free estimate.
We match your series code to the correct factory or quality aftermarket part and quote both in writing so you can compare. Whatever we install is covered by our written guarantee and the 365-Day Done Right Promise. Call (833) 510-6967 to start with a free estimate.
Get a Written Price on Your Mr-Glass Windows & Doors
Whether it’s one fogged window in a Bixby Knolls home or a full set of coastal-spec impact doors, we give you the number before any work starts: a written price, a real arrival window, and a written guarantee on every job. A live person answers (833) 510-6967 around the clock, and our background-checked technicians arrive in uniform. Call today for your free estimate on Mr-Glass-compatible windows and doors in Long Beach, and we’ll tell you exactly what your part needs.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












