







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Long Beach Owner’s Guide
Owens Corning kitchen remodeling in Long Beach typically runs $14,000 to $45,000 installed, depending on layout, cabinet line and countertop material, and most projects are scoped with a written price before any demo begins. You’re likely here because something in an Owens Corning-backed kitchen assembly has failed – a cabinet box that swelled at the toe kick, a laminate countertop seam that lifted, or an underlayment board that went soft near the sink. In Long Beach, we see this most often in homes within a mile or two of the water, where marine humidity and the occasional roof leak find the weakest layer first.
Key takeaways:
- Installed kitchen remodeling in Long Beach: $14,000 – $45,000, with a written line-item price before work starts.
- Every repair carries our 365-Day Done Right Promise in writing.
- We’re an independent remodeler, not affiliated with Owens Corning – we install and repair assemblies built around their products.
Which Owens Corning Models This Applies To

Owens Corning is best known in kitchens for its insulation and sheathing products, not for finished cabinetry – so when an owner says “my Owens Corning kitchen part failed,” they’re usually pointing at one of three things: foam board insulation behind an exterior kitchen wall, acoustic batt insulation in an interior partition, or a rigid underlayment/substrate board set beneath tile or laminate. Each has its own identification path. The foil or kraft facing carries a printed product code and R-value, and the board’s thickness in inches tells you which series you’re matching. Measure twice: a 1-inch foil-faced board and a 1.5-inch board look similar on a shelf but fit nowhere near the same cavity.
For Owens Corning specifically, the OEM-versus-aftermarket decision usually breaks toward a compatible equivalent rather than a factory part, because these are commodity building materials with published R-values and dimensions. Any substitute must match the R-value, thickness and facing type. We install Cambria quartz and Silestone counters over properly prepped substrates, and we source KraftMaid cabinetry when a box itself needs replacing. If you’re unsure which product you have, a photo of the printed facing code settles it faster than guesswork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
Failure shows up at the edges and the wet zones first. Here’s what owners in Long Beach report, and what’s usually underneath it.
- Soft or stained toe kick near the sink. Water has wicked into the substrate or cabinet box, usually from a slow supply-line weep or a dishwasher gasket. By the time the stain shows, the board is often already compromised.
- Tile or laminate that feels spongy underfoot. The underlayment has absorbed moisture and lost its bond to the subfloor. In Long Beach’s humid coastal air, an unsealed edge is enough to start it.
- Condensation or dampness on an exterior kitchen wall. The insulation facing may have been punctured during a past repair, letting vapor through where it shouldn’t.
- A seam that lifts or telegraphs through a countertop. The substrate beneath wasn’t flat or was the wrong thickness for the span.
- Musty smell that returns after cleaning. Moisture is trapped in an assembly rather than venting, which points to a barrier or facing problem, not the surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Long Beach, here’s what the work typically runs. These are installed ranges – material plus labor – not bare parts prices.
| Scope | Installed range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number up: exterior-wall insulation work that requires opening and re-sealing a wall, cabinet-line upgrades, and natural stone versus laminate. What drives it down: a single-zone repair rather than a full remodel. Every homeowner gets a written price before any work starts, so the number on day one is the number on the invoice. The labor and installation carry our 365-Day Done Right Promise in writing.
DIY or Call Us?
You can safely check a few things yourself: photograph the printed product code on the insulation facing, note the board thickness, and press a screwdriver handle into soft spots to map where the damage spreads. Stop there for anything involving an exterior wall cavity, a wet substrate under tile, or gas and electrical near the cabinet run. Cutting into a moisture barrier or a vapor-facing board the wrong way traps water where it can’t dry, and that’s how a small repair becomes a mold problem. Insulation and substrate work is less dangerous than door springs or panel wiring, but it’s unforgiving of mistakes made behind a finished wall. Call (833) 510-6967 and we’ll tell you honestly whether it’s a check-it-yourself situation or a job for us.
FAQs

How long should an Owens Corning-insulated kitchen wall last in Long Beach? A properly installed assembly should hold for decades, but coastal humidity and any roof or plumbing leak shorten that fast – we routinely see facings fail early in homes near the water. Call (833) 510-6967 for a free estimate on assessing yours.
Can it be repaired instead of replaced? Often yes – if the damage is a single compromised zone and the surrounding facing is intact, a targeted repair saves real money over a full remodel. Call us and we’ll tell you which you’re looking at.
How long does the swap take? A focused substrate or insulation repair is typically a one- to two-day job; a full kitchen remodel runs weeks, planned around your written schedule. Call (833) 510-6967 to get your timeline in writing.
How do you source the part? We match R-value, thickness and facing type to your existing assembly and source through recognized trade suppliers – never off a truck. Call for a free estimate and we’ll confirm the exact match before any work starts.
We also work with KraftMaid, Cambria and Silestone when a kitchen needs more than a single-part fix. If something in your Long Beach kitchen has failed and you want a straight answer and a written price, call Penhallow Remodeling Long Beach at (833) 510-6967 for a free estimate. A live person answers around the clock, and every job carries our 365-Day Done Right Promise in writing.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












