







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Long Beach Owner’s Guide
We install and rebuild Sterling paver driveways for Long Beach homeowners at $7,000 – $18,000 for a full paver driveway, and we can usually get a written quote to you the same day you call. Sterling’s interlocking systems hold up well in Southern California, but the failure pattern is consistent once they do go: joints start shedding sand, individual units rock underfoot when you pull into the driveway, and the edge line along the curb or garage apron begins to wander. Most owners in Long Beach notice it first as a loose unit near the street where the delivery truck turns, or as a low spot holding water after the first real rain.
Which Sterling Models This Applies To

Sterling’s paver line has run through several profile families over the years, and knowing which one you have changes the replacement part. The identifying move is the same on every job: pull back one unit and measure the actual face dimensions and thickness, then measure the joint (the gap between units), because Sterling families differ in both. A 60mm profile and an 80mm profile are not interchangeable in a driveway that sees a loaded truck, even if they look the same from above. Check for a stamp or ink mark on the side of a unit; most Sterling pavers carry one, and a photo of it plus a tape measurement settles the question in a single call.
On the OEM front: genuine Sterling units match the existing texture and color lot most closely, which matters on a repair where the new pieces sit beside old ones in the middle of a driveway. Quality aftermarket equivalents from a manufacturer like Belgard or Unilock can be a sound choice when the driveway is being rebuilt in sections rather than patched, and the color and dimensional match is close enough that the repair doesn’t read as a patch. We’ll lay out the trade-off in plain terms: OEM for a repair that has to blend, aftermarket when you’re rebuilding a bay or the apron and want better value per square foot.
We are an independent installer and not affiliated with Sterling. We source to your measured spec, not to a catalog picture.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Joints shedding sand faster than normal. The bedding sand is migrating down through the base. It’s the earliest warning sign, and it means the base material is losing its grip, not that the sand was cheap.
- Units rocking underfoot or under the car. The bedding course has thinned or a base layer has settled. In Long Beach, the usual cause is a base that was compacted once instead of in lifts, and it shows up in the wheel path first.
- Weeds tracking the joint lines. Weeds grow where water sits, so a weed line tells you which sections of the driveway aren’t draining. Treat it as a map of the low spots, not just a maintenance chore.
- Edge units pushing out along the curb or apron. Edge restraint (the border that locks the field of pavers in place) has come loose or was set short. Once the edge goes, the units behind it work loose in a chain.
- Faded or chalky color on the sun-facing bays. UV exposure along a west-facing driveway is punishing, and Sterling’s color layer can thin where the sun hits hardest. If the surface is chalky and the color is gone, the wear layer is spent and the unit needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Long Beach, a full paver driveway installation for a standard two-car drive runs $7,000 – $18,000. A driveway replacement (removing and rebuilding the whole surface) runs $5,000 – $14,000. If we’re rebuilding a bay of Sterling pavers, matching the existing units and re-setting the edge, that’s priced per section rather than at the full-driveway numbers, and the quote will show the line items.
| Work | Typical installed range |
|---|---|
| Full paver driveway | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio (for a back-yard Sterling match) | $3,500 – $11,000 |
What drives the number: driveway square footage, base depth and whether we’re rebuilding base or reusing it, the paver profile and whether OEM or aftermarket, and how much edge restraint needs replacing. You get a written price before we start, and the number on day one is the number on the invoice. The work carries our 365-Day Done Right Promise: if it fails inside the year, we come back and fix it at no charge.
DIY or Call Us?
You can safely do the inspection: measure the units, photograph the side stamp, note which bays rock and where water stands, and pull one unit to see what’s underneath. What you shouldn’t take on yourself is the base. A paver driveway that fails at two years almost always failed at the base – too little depth, compaction done once instead of in lifts, or a subgrade that wasn’t drained. Getting that right behind a Sterling profile takes a plate compactor and enough patience to test the soil, and a bad base is exactly what you’d be patching over if you skip it.
Edge restraint in a high-traffic Long Beach driveway is also more than it looks. If the border isn’t anchored into a solid edge, the field of pavers will walk outward again within a season, and you’ll be back where you started. If you want a second opinion on your failure pattern before you buy anything, call (833) 510-6967. We’ll tell you plainly whether it’s a repair or a rebuild.
FAQs

A well-installed Sterling paver driveway should give you 20 to 30 years before the surface needs rebuilding. The pavers themselves will outlast the base and the joints in most cases, so base quality and drainage are the real variables. Long Beach’s sandy soil drains well, but the flat inland lots hold standing water after heavy winter rain, which is where most early failures start.
If the failure is localized, a section rebuild is often the right answer. If the rocking and sand loss run across the whole wheel path, replacement makes more sense than chasing it bay by bay. We’ll tell you which it is on a walk-through, and the quote will reflect one or the other, not both. Call (833) 510-6967 to set that visit up.
A full paver driveway install typically takes 3 to 5 working days for a standard two-car drive, depending on base depth and how much of the subgrade needs work. A section rebuild is often a single day. You get a defined arrival window on the schedule, and the site is left cleaner than we found it.
From your measurements and the side stamp photo, so the replacement matches your profile and thickness. We’ll also offer a quality aftermarket equivalent when it makes better sense for a rebuild, and put the number for each option in writing so you’re comparing real prices. Call (833) 510-6967 for a free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












