







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Home Additions & ADU: The Long Beach Owner’s Guide
If you’re planning a Tamko home addition or ADU in Long Beach, the realistic installed range is $45,000 – $130,000 for a home addition and a bit more for a detached unit, and we schedule these projects on a written timeline rather than a same-day promise, because nobody builds an addition in an afternoon. Most Long Beach owners land on this page after a storm has pushed water through a tie-in, after a contractor has told them their existing roof-to-wall connection won’t support the plan, or after an inspector has flagged a drainage or flashing detail on a Tamko roof assembly during an addition. Whatever brought you here, the question is usually the same: what has to be replaced, what does it cost, and who does it right.
We’re Penhallow Remodeling Long Beach, an independent remodeling company, and we are not affiliated with Tamko. We work alongside their roofing and building materials on additions and ADUs throughout Long Beach. Here’s what that looks like in plain terms.
Which Tamko Models This Applies To

Tamko is a building-materials manufacturer, so “Tamko” on an addition or ADU job usually refers to the roofing system, underlayment, or flashing that ties your new structure into the existing house. If your addition carries a Tamko shingle line like Titan XT or Heritage, or a low-slope membrane on a flat-roof section, the compatibility question isn’t about a single part number: it’s about matching the new roof plane to the old one correctly. That means identifying your existing shingle line, the exposure and pitch, and whether the product is still in current production. Some discontinued lines require a transition detail at the tie-in so the two roof surfaces meet cleanly.
The OEM-versus-aftermarket call matters here too. Genuine Tamko ridge caps and starter strips are made to match their shingle profiles, and going with a mismatched brand to save a few dollars can void the manufacturer’s material warranty on the whole roof section. We source recognized trade brands – including KraftMaid, Cambria, and Silestone for the interior finishes on an ADU – and we’ll tell you when a Tamko-matched component is worth the small premium and when a quality equivalent is functionally identical. To identify what you have, check the attic for a bundle label, or look for a brand stamp near the ridge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Home Additions & ADU Is Failing
Addition and ADU roofing and tie-ins fail in predictable ways, especially here. Long Beach sits close enough to the coast that salt air and onshore moisture accelerate corrosion on fasteners and flashing faster than inland buyers expect, and our occasional heavy rain events find any weak point fast. Watch for these:
- Water staining at the tie-in wall. Where the new roof meets the old house, failed step flashing lets water track behind the siding. You’ll see brown stains on interior drywall before you see anything outside.
- Curling or lifted shingle tabs on the new plane. Usually poor attic ventilation on the added section, which cooks the shingles from underneath and shortens their life dramatically.
- Rust streaks on flashing and fasteners. Common in Long Beach’s coastal air. Galvanized or coated flashing that wasn’t specified for the environment degrades within a few seasons.
- Sagging or soft spots along the addition roofline. Can indicate undersized framing or a leak that’s been soaking the deck for a while. Worth checking before it reaches the ceiling.
- Pooling water on flat-roof ADU sections. A pitch or drain problem, not just a roofing problem. Standing water will find the seams.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For an addition or ADU in Long Beach, the honest price range is $45,000 – $130,000 for a home addition and $30,000 – $80,000 for a garage conversion, with a full ADU running higher. What pushes you toward the top of that range: a complex roof tie-in, structural upgrades to carry the new load, and finish selections. What keeps it lower: a straightforward footprint and standard finishes.
| Project (Long Beach) | Typical Installed Range |
|---|---|
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
Our prices are line-item and written before work starts. That includes the roofing tie-in, flashing, and any Tamko-matched components, so the number on day one is the number on the invoice. Every project carries our 365-Day Done Right Promise in writing: if the work fails inside that year, we come back and make it right at no charge, with a free return visit if something needs a second look.
DIY or Call Us?
There’s a real line here, and it’s worth respecting. You can safely check your attic for the shingle bundle label, note where water is staining, and photograph the tie-in from the ground. What you shouldn’t do yourself is roof work at height or any structural framing on an addition. A roof tie-in gone wrong means water inside a finished addition, and a structural mistake on a load path is a genuine safety issue that only a trained professional should touch. The inspection itself is what protects your investment, and it’s the part that’s hardest to judge from a ladder.
If your project is beyond a simple visual check, the next step is a free estimate. Call (833) 510-6967 and we’ll walk the project with you, give you a written price, and explain exactly what the guarantee covers before anyone picks up a tool.
FAQs

How long does a Tamko addition or ADU take in Long Beach? A home addition typically runs several weeks to a few months depending on size, permits, and inspections, and an ADU runs longer. We give you a written schedule up front, not a verbal ballpark. Call (833) 510-6967 to talk through your timeline and get a free estimate.
Can you repair the tie-in instead of rebuilding the addition? Often yes. If the failure is localized to flashing or a roofing detail at the tie-in, a targeted repair can fix it without touching the whole structure. We’ll tell you honestly whether repair or replacement makes sense after we look.
Do you pull the permits? Yes. Permits and inspections are part of the job on additions and ADUs, and we handle them so nothing gets flagged later. Your written price reflects the full scope, including permitting.
How do you source Tamko-matched materials? We match your existing Tamko line and profile, and when a genuine component is worth the premium for warranty reasons, we say so. When a quality equivalent makes more sense, we explain why. Either way, it’s spelled out in your written quote. Call (833) 510-6967 for a free estimate.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












