







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Long Beach Owner’s Guide
If you’re searching for Tamko kitchen remodeling in Long Beach, here’s the straight answer: we install Tamko-compatible kitchen components as part of full kitchen remodels that typically run $14,000 – $45,000 in this market, and we can usually get a technician out to look at a failing part within a few days of your call. We’re an independent remodeling contractor, not affiliated with Tamko, so we’ll tell you plainly whether a Tamko part is the right replacement or whether a different product makes more sense for your kitchen.
Most Long Beach owners discover a failed part the same way: a cabinet door that won’t stay aligned, a countertop seam that’s started to lift, or a backsplash tile that’s popped loose after a humid summer. You notice it on a Tuesday, you poke at it, and by the weekend you’re trying to figure out what’s actually behind the failure. That’s the moment this page is for.
Key Takeaways
- Tamko kitchen components fail on a predictable schedule in Long Beach’s coastal humidity – usually 7 to 12 years for exposed seals and substrates.
- Full kitchen remodels here run $14,000 – $45,000; a targeted part replacement runs far less.
- We give you a written price before any work starts, backed by our 365-Day Done Right Promise.
- Call (833) 510-6967 for a free estimate – a live person answers, 24/7.
Which Tamko Models This Applies To

Tamko’s kitchen-relevant product lines break down into a few families, and knowing which one you have changes both the part number and the price. Their underlayment and moisture-barrier products (often sold under the Tamko name at building supply yards across Long Beach) are the most common ones homeowners ask us about, because they sit under tile, behind backsplash, and beneath countertop edges where failures are invisible until they aren’t. Tamko-branded sealants and flashing components show up around kitchen windows and sink cutouts too.
To identify what you actually have, look for three things: the product label on the original packaging (if you kept it), the printed product code on the material itself – Tamko stamps or prints a code on most roll goods – and a physical measurement of the piece. Width and thickness matter more than the printed name; a 36-inch roll and a 39-inch roll are not interchangeable, and a quarter-inch difference in thickness will change how your substrate sits.
On the OEM-versus-aftermarket question, our honest position: Tamko’s own replacement components are the safest match when you’re patching an existing installation, because the formulation and dimensions are guaranteed to line up. A quality aftermarket equivalent is fine when you’re replacing a whole section rather than patching, and it’s often 20 to 30 percent less expensive. We’ll tell you which situation you’re in before we quote. We also work with KraftMaid cabinetry, Cambria quartz, and Silestone surfaces when a Tamko part failure turns into a broader kitchen project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
These are the five symptoms we see most often in Long Beach kitchens, and what’s usually causing each one.
- Lifted or curled edges on underlayment or moisture barrier. This is almost always adhesive failure from sustained humidity, not a defective product. Long Beach sits close enough to the water that interior humidity swings seasonally, and older adhesive formulations don’t tolerate that cycle forever.
- Dark staining or soft spots near the sink or dishwasher. Water is getting past a seal that’s already failed. By the time you see the stain on the surface, the substrate underneath has usually been wet for weeks.
- Grout cracking in a straight line above a backsplash. The substrate has shifted or swollen. That’s a moisture problem, not a grout problem, and re-grouting without fixing the cause means it cracks again in six months.
- Countertop seams that have opened or darkened. The seam adhesive has degraded, and moisture is wicking into the joint. Left alone, this is how a $2,000 countertop becomes a $6,500 replacement.
- A musty smell that won’t go away after cleaning. This one matters. Odor that persists means moisture is trapped behind a surface, and it’s worth having someone look before you spend money on a cosmetic fix.
Replacement Cost & What’s Included

Here’s what these jobs actually run in Long Beach, installed, with parts and labor together:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel (Tamko-compatible components) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the size and layout of the kitchen, whether cabinets are being replaced or refaced, which countertop material you choose, and whether we’re opening a wall. A single failed Tamko component in a small area sits at the low end. A failure that’s spread into the substrate and forced a partial tear-out sits closer to the middle or high end. You’ll get a written line-item quote before we touch a thing – parts, labor, and disposal listed separately – so the number on day one is the number on the invoice. Every project carries our 365-Day Done Right Promise in writing, and if something we installed fails inside that year, we come back and fix it at no charge. Cambria and Silestone quartz surfaces carry their own manufacturer warranties on top of ours.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check yourself without risk. Look for staining, feel for soft spots near the sink, shine a flashlight into the gap behind the backsplash, and check whether any sealant has visibly separated. Take photos. That’s genuinely useful information and we’ll ask for it anyway.
What we’d steer you away from is tearing into a moisture barrier or substrate to “see what’s going on.” That’s the kind of exploratory demolition that turns a repairable $800 problem into a $6,000 rebuild, because you can’t put the layer back the way it was once it’s cut. If a cabinet, countertop, or backsplash is attached to the area you’re investigating, stop there and let us look. We’re background-checked, uniformed, and we leave the site cleaner than we found it – the plain standard we operate by. Call (833) 510-6967 for a free estimate and we’ll tell you honestly whether you’re looking at a patch or a replacement.
FAQs

Expect 7 to 12 years for exposed seals, flashing, and moisture-barrier materials in Long Beach’s coastal climate, with the lower end applying to anything directly behind a sink or dishwasher where water exposure is constant. Inland neighborhoods like Bixby Knolls tend to run closer to the 12-year mark because the humidity swing is gentler than in Belmont Shore or along the bluff. If yours is past that window and showing any of the symptoms above, it’s worth a look before it fails completely. Call (833) 510-6967 for an exact quote – estimates are free.
Sometimes, yes. A localized seal failure or a single lifted section can often be repaired if the substrate underneath is still dry and solid. The deciding factor is moisture: if the material behind the failed layer is wet or soft, a repair is cosmetic and will fail again within a year. We check that before we quote, and we’ll tell you which one you’re looking at.
A targeted part swap in an open area typically takes a half day to a full day. If the failure has spread into substrate, backsplash, or countertop, plan on two to four days. We give you a real arrival window and a written scope before we start, so you know the schedule going in rather than finding out on day three.
We order through established building supply channels rather than keeping stock – we don’t carry parts on a truck, and we’ll say so plainly. That means the part is matched to your specific product code and dimensions before it arrives, which is exactly what prevents the wrong-roll problem that keeps a lot of Long Beach kitchens sitting half-finished for weeks. Materials come from recognized trade brands, and we confirm the match with you before ordering.
Get a Written Price Before Any Work Starts
If a Tamko component in your Long Beach kitchen has failed or is heading that way, the next step is simple: call (833) 510-6967 for a free estimate. A live person answers, day or night, and we’ll give you a written number you can hold us to – before a single tool comes out of the truck. Penhallow Remodeling Long Beach operates as part of the Kingswell family of companies, and each location is independently owned and operated.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












