







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Long Beach Owner’s Guide
We install and service Tamko-compatible windows and doors throughout Long Beach, and most whole-window replacement jobs here land between $4,500 and $15,000, while impact-rated units run $8,000 to $25,000. If you have a single failed sash, balance, or door sweep, the fix is usually a parts-and-labor visit rather than a full replacement, and we’ll tell you which one you’re facing after we look. Long Beach owners typically call us when a Tamko window won’t stay open, a door drags on the sill, or they spot condensation trapped between panes. Those three symptoms account for most of the Tamko calls we take, and each points to a different failed part.
Which Tamko Models This Applies To

Tamko makes windows and doors across several lines, and the part you need depends on which one is in your wall. The most reliable way to identify your unit is to find the manufacturer label on the sash frame or the top of the door slab, then measure the visible glass width and height and the frame depth. Those four numbers narrow the match faster than a model name alone, because Tamko has changed hardware suppliers over the years and two units with the same model name can carry different balances or hinges. On older Long Beach homes, we regularly find a Tamko window that was retrofitted into an original 1950s opening, which means the rough opening dimension matters as much as the unit itself.
When it comes to OEM versus aftermarket, here’s the honest answer. OEM parts are the guaranteed match, but some older Tamko lines have discontinued specific hardware, and waiting on a specialty order can stretch past a week. A quality aftermarket balance or sweep from a recognized supplier will function correctly if the dimensions match, and we’ll tell you plainly when that’s a fair trade and when it isn’t. We’re an independent service provider, not affiliated with Tamko, so our recommendation is based on what fits your unit, not on what’s easiest for us to order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
- The window won’t stay open or slams shut. A failed balance or spiral spring is the cause, and it’s the single most common Tamko window repair we handle. The sash gets heavy and unsafe to hold, especially on second-story units.
- Condensation or fog between the panes. This means the sealed glass unit has lost its seal, so the insulating gas has escaped and moisture is trapped inside. No amount of wiping fixes it; the glass unit has to be replaced or the whole window swapped.
- The door drags or won’t latch. A worn sweep, a sagging hinge, or a shifted threshold plate is usually behind it. In Long Beach’s marine air, we see this accelerate on south- and west-facing doors where salt and moisture work on the hardware faster.
- Drafts or water at the frame. Failed weatherstripping, a cracked glazing bead, or a perimeter seal that’s pulled away lets air and rain in. Left alone, that moisture reaches the framing behind the wall.
- The lock or latch won’t engage cleanly. A misaligned keeper or worn multipoint hardware means the door isn’t fully securing. That’s a functional and a security problem, and it’s worth fixing before it leaves the door sitting unlatched against the weather.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In the Long Beach market, a single failed part swap such as a balance, sweep, or hinge set typically runs a few hundred dollars with labor, while a full window replacement pushes into the ranges below. Here’s how the numbers break down for Long Beach homeowners:
| Service | Installed Range (Long Beach) |
|---|---|
| Single-part repair (balance, sweep, hinge) | Quoted per visit – parts plus labor |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
What drives the range up: impact-rated glass required on more Long Beach openings, second-story access, and the number of units in the job. A single replacement sits at the low end; a whole-home package with impact glass sits at the top. Every quote is a written price before any work starts, and it includes the part, the labor, disposal, and our written guarantee on the work. The number on day one is the number on the invoice. We also install KraftMaid, Cambria, and Silestone on our remodeling side, so if a window replacement turns into a larger project, you’re still dealing with one written scope.
DIY or Call Us?
Some things you can safely check yourself. Look for the label on the sash, measure the glass and frame, and confirm whether the window won’t stay up, won’t seal shut, or shows fog between the panes. That information helps us match the part before we arrive.
Where DIY goes wrong on Tamko windows and doors is the same place it goes wrong on every brand: forcing a balance that doesn’t match the sash weight, prying a sealed glass unit and cracking it, or adjusting a hinge without confirming the frame is square. The dangerous one is a window sash that’s held by a tired balance on an upper floor; if it releases while you’re leaning out, it can come down hard. We’d rather you not gamble with that. A failed balance replacement is a fast, low-cost visit, and we’ll confirm the match and the safety of the unit in the same trip. Background-checked, uniformed technicians handle it, and if a repair ever fails within the guarantee period, we come back at no charge with no service call or re-inspection fee. Call (833) 510-6967 to schedule your free estimate.
FAQs

A well-installed Tamko window typically lasts 20 to 30 years, but Long Beach’s coastal humidity shortens the life of the seals and hardware faster than in dry inland climates, so we often see balance and weatherstrip failures closer to 15 years on west-facing units. Call (833) 510-6967 for an exact quote – estimates are free.
Usually yes. A failed balance, sweep, hinge, or lock is a part swap, not a new window, and it costs a fraction of replacement. The exception is a sealed unit that’s lost its gas and fogged between the panes, which has to be replaced. Call (833) 510-6967 and we’ll tell you which side of that line your Tamko unit is on.
A single part repair is typically a same-visit job, often under an hour; a full window or door replacement is a scheduled project we give you a real arrival window for. Call (833) 510-6967 to set your free estimate and confirm timing.
We match the part to your unit using the label and measurements, then source it from reputable suppliers including OEM and quality aftermarket equivalents. We don’t claim to stock parts on a truck or hold local inventory, so if a specific order takes longer, you’ll know that before we commit. Call (833) 510-6967 to get started.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












