







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Long Beach Owner’s Guide
Therma-Tru fence installation in Long Beach typically runs $3,500 – $9,000 installed, depending on fence length, gate count, and how much old fencing has to come out first. Most full-yard jobs take two to four days once the line is marked and the permit is in hand. We install Therma-Tru-compatible fencing systems and materials no daily, so this is planned work, not an emergency call.
Owners usually notice the problem the same way: a gate sags and drags on the walk, a post starts leaning after the first winter rain, or a section of pickets near a sprinkler head turns soft under the thumb. On the Long Beach side of the harbor, that third one shows up fast. Salt air off the water and sun on the inland blocks of Belmont Shore and Bluff Park age fence components differently than a dry inland yard would.
Which Therma-Tru Models This Applies To

Therma-Tru is best known for entry door systems, and it builds compatible exterior trim, railing, and fencing components through its exterior products lines. If you’re matching an existing gate or fence run, the starting point is the original label. Look on the inside face of the top rail, the post cap, or the gate stile for a manufacturer tag with a series name and a part or profile number. If the tag has faded or peeled off, measure the rail height and picket thickness with a tape and bring those numbers to the conversation; profile size is what tells us which system you have.
The OEM-versus-aftermarket call is a real decision here. Factory-matched components keep the profile and color consistent with the rest of your fence and preserve any finish warranty Therma-Tru offers on its parts. Quality aftermarket rails and caps cost less and work fine on a fence that’s already weathered, especially if you’re replacing one run and the rest is due for attention anyway. We’ll tell you which one makes sense for your yard rather than pushing the expensive option by default. We’re an independent installer, not affiliated with Therma-Tru, so the recommendation is ours, not theirs.
One compatibility gotcha worth knowing: components sold for one Therma-Tru series won’t always drop into another, even when the profiles look similar. Rail heights that differ by a quarter inch will leave a gate sitting proud of its post and out of square once it swings. Measure twice before you order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
- Posts leaning after rain. Usually a footing set too shallow or in soil that drains poorly. Long Beach lots near the water can sit on sandy fill that shifts, and a post that moves once will keep moving.
- Soft or spongy pickets. Moisture wicking up from ground contact or from a sprinkler that hits the same spot every morning. Once the material goes soft at the base, it can’t be saved.
- Gates that drag or won’t latch. Hinge screws backing out of a weathered stile, or the gate frame has racked out of square. Left alone, the next thing that fails is the hinge itself.
- Peeling or chalky finish. Sun exposure on the south face of a Long Beach fence will do this first. Chalking is cosmetic at first, but a finish that’s cracked all the way through lets moisture into the material.
- Loose or missing fasteners. Corrosion on coastal hardware is normal within a few years. Replacements need to be rated for the salt air, or you’ll be back at the same repair next season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Long Beach, a full Therma-Tru-compatible fence installation typically falls between $3,500 and $9,000. The number moves with fence length, gate count, hardware grade, and whether old fencing and posts need demolition and haul-away. A single-run repair or gate rebuild lands at the low end; a whole-property install with new footings and multiple gates sits at the high end.
- Removal and disposal of old fencing and failed posts
- New footings set to depth for your soil conditions
- Fence materials and Therma-Tru-compatible components, matched to your existing run
- Coastal-rated hardware and gate hardware
- Permit pull where the city requires one, and the inspection to close it out
- Written workmanship guarantee, plus a free return visit if anything we installed fails inside the guarantee period
Every job starts with a written price before anyone picks up a tool. The number on day one is the number on the invoice, and the guarantee is written down, not promised over the phone.
DIY or Call Us?
Some of this is safe to check yourself. Walk the fence line after a rain and look for lean. Press a screwdriver into the base of a few pickets to test for softness. Note which gate drags and where. That’s useful information to have when you call, and it costs you nothing.
Where it goes wrong is in the digging and the footings. A post set too shallow or in poorly drained Long Beach soil will lean again within a season or two, and redoing it means paying twice. Gate frames that have racked need re-squaring before new hardware goes on, or the same drag comes right back. And if any part of the run is load-bearing or close to a property line, the setback rules matter. A contractor pulls the permit and handles the inspection; a homeowner doing it themselves owns that mistake.
Call (833) 510-6967 and we’ll walk the yard with you and give you a written number. Estimates are free, and a live person answers the phone any hour.
FAQs

A well-installed fence with proper footings and coastal-rated hardware typically lasts 15 – 20 years in Long Beach conditions, though sun exposure and salt air will shorten that on the west-facing runs. Regular washing and a touch-up of the finish every few years adds years to the back half. Call (833) 510-6967 if you want an honest read on what’s left in your current fence.
Sometimes, yes. A single leaning post, a dragging gate, or one soft section can often be repaired and matched to the rest of the run at a fraction of the replacement cost. Once the material has gone soft through the thickness, or multiple posts have shifted, repair stops making financial sense. We’ll tell you which one you’re looking at.
A single gate or short run is usually a one-day job, while a full-yard replacement takes two to four days depending on length, gate count, and how much demolition is involved. We give you a defined arrival window and stick to it. Call (833) 510-6967 to get your project on the schedule.
We source through recognized trade brands, including Therma-Tru, and we match components to your existing profile and series rather than guessing. If the original label is gone, we measure the rails and stiles before we order.
Our technicians have up to 22 years of experience, and we install materials from KraftMaid, Cambria, and Silestone on the remodeling side of the business when a project calls for them.
Penhallow Remodeling Long Beach operates under the Kingswell Guarantee: a written price before any work starts, a defined arrival window, a clean job site, and a written guarantee on every project. The 365-Day Done Right Promise means if the work fails inside the guarantee period, we come back and fix it at no charge, and if a repair fails, we make the return visit free. Every technician is background-checked and arrives in uniform. Call (833) 510-6967 for a free estimate on your Long Beach fence project.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












