







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Long Beach Owner’s Guide
Tremron bathroom remodeling in Long Beach typically runs $9,000 – $28,000 installed, depending on the bathroom’s size, tile selection and whether we’re replacing fixtures or reworking the layout. We handle the full scope: demolition, waterproofing, tile setting, vanity and fixture install, and final finish work. We’re an independent remodeling company, not affiliated with Tremron, and we install to spec with a written price before work starts.
Owners usually discover a failing Tremron installation the same way. A grout line over the shower curb starts darkening within a week of cleaning. A floor tile sounds hollow underfoot near the toilet. Or the caulk joint where the wall meets the tub pan pulls away for the third time, and someone finally lifts a tile to find damp thinset and a swollen subfloor beneath it. In Long Beach, with our marine air and summer humidity, those symptoms show up faster than most inland homeowners expect.
Which Tremron Models This Applies To

Tremron is a Florida-based tile and paver manufacturer, so the product most Long Beach owners ask us about is their porcelain and ceramic floor and wall tile. That matters because Tremron tile lines are sold by series, and each series carries its own nominal size, thickness and shade variation range. A “12×24” from one Tremron series may measure 11⅝ by 23⅝, which throws off your layout math if you’re matching an existing floor. Check the carton label or the ink-stamp on the tile back: it lists the series, the caliber (a firing-shrinkage batch code) and the nominal size. Caliber matching is the compatibility gotcha most owners miss. Two tiles from the same series but different calibers will sit at slightly different thicknesses, and the grout joint telegraphs it.
On the OEM-vs-aftermarket question: for current Tremron tile, we source through tile distributors who carry the actual series, not lookalikes. For discontinued series, we explain the trim and bullnose options honestly before quoting, because matching an old dye lot is often impossible and a close aftermarket porcelain may be the better value. We also work alongside KraftMaid, Cambria and Silestone when the job turns into a full vanity or countertop replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
Here’s what a failing tile installation actually looks like, and what’s causing it underneath:
- Hollow sound when you tap a floor tile. That’s a void in the thinset, usually from a trowel-notched bed that wasn’t back-buttered. Left alone, the tile cracks at the corner first.
- Grout cracking in a straight line across the floor. Straight-line cracks trace a movement joint that wasn’t honored, or a subfloor deflection problem that tile can’t bridge.
- Dark or damp-looking grout around the shower floor. Water is getting past the surface and sitting in the setting bed. On a proper install, the waterproofing membrane handles that; when it’s missing, the grout is the only barrier and it’s losing.
- Recurring caulk failure at the tub or shower pan edge. Silicone pulling away repeatedly usually means moisture is behind it or the joint is moving more than the caulk can flex.
- Grout haze that won’t come off, or efflorescence (white powder) on the grout. Mineral salts migrating out as moisture moves through the assembly. It’s a water problem, not a cleaning problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a bathroom remodel in Long Beach, expect $9,000 – $28,000 installed. A small bathroom remodel (roughly a half bath or a tight five-by-eight) runs $5,000 – $12,000. If the scope is limited to tile, a shower replacement is $3,000 – $8,500, a walk-in shower installation $4,500 – $12,000, and a tub-to-shower conversion $3,500 – $10,000. A vanity installation is $800 – $3,000; countertop installation $2,000 – $6,500.
What drives the number up: tile that needs full removal and a new substrate, waterproofing that was never there, and layout changes that move plumbing. What keeps it down: keeping the fixture locations and re-tiling over sound, properly prepared substrate. Every job gets a written price before demolition, parts and labor broken out, so the number on day one is the number on the invoice. Every project carries our 365-Day Done Right Promise, and if something fails inside that window, we come back and fix it at no charge.
DIY or Call Us?
Some checks are safe and worth doing yourself. Tap each tile with a screwdriver handle to find hollow spots. Run a level across the floor to check for deflection. Look at the carton label or tile back-stamp to identify the series and caliber before you buy replacement tile. Re-caulking a tub edge with 100% silicone is a reasonable weekend task.
Where it goes wrong is the tile itself. Setting over a failed substrate hides the problem for a season and then fails again, and by then you’ve paid twice. This is also where a safety note belongs: there’s nothing high-voltage in tile work, but demo of a shower assembly can expose old electrical, and a botched waterproofing job leads to rot in framing that’s far costlier than the tile. For anything beyond a caulk line, call us at (833) 510-6967. Estimates are free and the written price comes before the work.
FAQs

A properly installed porcelain floor lasts 30 to 50 years. The tile itself almost never fails; the installation does. In Long Beach, our coastal humidity and the moisture a bathroom holds mean the weak points are the waterproofing and the grout, and a bad membrane will show up in 3 to 7 years. Call (833) 510-6967 for a free estimate if yours is showing early signs.
Sometimes, yes. A handful of hollow or cracked tiles can be removed and reset if the substrate under them is sound and you can source a matching caliber. Once the failure is across the floor or the waterproofing has given out, a repair is temporary and a replacement is the honest call. We’ll tell you which one you’re looking at after we look. Call (833) 510-6967 to schedule.
Most single-bathroom tile replacements take 5 to 10 working days from demo to final grout, depending on square footage, curing time for the waterproofing, and whether plumbing moves. We give you a defined arrival window and leave the site cleaner than we found it, per The Kingswell Way. Call (833) 510-6967 for a written schedule with your estimate.
We source current Tremron series through tile distributors who stock it, and we match caliber and dye lot at purchase so your floor is consistent. For discontinued series, we’ll show you the honest options, including a compatible aftermarket porcelain, before you commit. We don’t stock parts or carry tile on a truck, but we quote the material as a line item so you see exactly what you’re paying for. Call (833) 510-6967 with your series name and we’ll confirm availability.
If your Tremron tile is showing hollow spots, dark grout or a caulk line that won’t stay put, the smartest next step is a free estimate. We’ll show up on time, in uniform, and hand you a written price before any work starts, backed by our 365-Day Done Right Promise. Call Penhallow Remodeling Long Beach at (833) 510-6967. A real person answers, day or night.
Written by the team at Penhallow Remodeling Long Beach, serving Long Beach and nearby areas.












