







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Long Beach?
Walk-in shower installation in Long Beach typically costs $4,500 to $12,000. A straightforward swap using a prefab pan and acrylic surround lands near the low end, around $4,500 to $6,500. A fully tiled custom walk-in with a frameless glass panel, a linear drain and bench seating pushes toward $9,000 to $12,000. Most Long Beach homeowners we work with land somewhere near $7,000 for a tiled shower that fits the footprint of the tub or shower it replaces.
That range covers removal of the old unit, waterproofing, a new shower pan, tile, glass and the labor to put it all together. The number that matters is never the deposit. It’s the written price you get before demo day, and the guarantee that comes with it.
Key Takeaways
- Typical Long Beach walk-in shower installation runs $4,500 to $12,000.
- Tile choice, glass type and drain style move the number most.
- Long Beach’s coastal humidity makes waterproofing a cost driver, not an upgrade.
- You get a written price before any work starts, so the number on day one is the number on the invoice.
- Every installation is covered by our 365-Day Done Right Promise in writing.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how the $4,500 to $12,000 range breaks down in the Long Beach market. These are line-item ranges, not a single lump sum, so you can see where your money goes.
| Line Item | Typical Range | What Drives It |
|---|---|---|
| Demolition and haul-away | $400 – $900 | Whether it’s a tub, a tile shower or a prefab insert coming out |
| Plumbing rough-in and valve work | $600 – $1,800 | Moving the drain, relocating the valve, new shower diverter |
| Waterproofing and shower pan | $700 – $1,600 | Membrane system, cement board substrate, pre-sloped pan |
| Tile and setting materials | $900 – $3,500 | Porcelain vs. natural stone, tile size, grout and sealant |
| Glass enclosure | $700 – $2,800 | Frameless vs. semi-frameless, panel size, hardware finish |
| Fixtures (head, valve, drain) | $300 – $1,200 | Kohler, Moen and Delta lines, rain heads, linear drains |
| Labor and installation | $900 – $2,200 | Layout complexity, bench or niche, tile pattern |
A basic prefab walk-in keeps the tile, glass and labor lines low and lands near $4,500 to $6,500. Move to a fully tiled custom shower with a frameless glass panel and a bench, and the same job climbs to $9,000 to $12,000. The spread between those two numbers is almost entirely tile, glass and layout.
If you’re already planning a wider bathroom refresh, walk-in shower work often makes more sense bundled into a full bathroom remodel than done alone. And if you’re converting an existing tub, our Long Beach service area team can tell you up front whether a tub-to-shower conversion is the cleaner path.
What Affects Walk-In Shower Installation Pricing in Long Beach
Two showers with the same square footage can come in $4,000 apart. Here’s what moves the number in this city specifically.
- Tile material. Porcelain and ceramic run $3 to $12 per square foot. Natural stone like marble or travertine runs $10 to $30 and needs sealing. In Long Beach’s salt-air climate, porous stone needs resealing every year or so, which is a cost to plan for, not a surprise later.
- Glass enclosure type. A semi-frameless panel might run $700. A true frameless glass unit with custom-cut panels and a top-of-the-line hinge set climbs to $2,800. Curved or angled glass adds cutting cost.
- Subfloor and framing condition. Older homes in neighborhoods like Belmont Shore and Bluff Park often hide water damage under a decades-old shower pan. Replacing rotted framing or a soft subfloor adds $500 to $1,500. We open the wall and check before we quote the tile, not after.
- Drain relocation. Keeping the drain where it is saves money. Moving it to center the shower on a wall or to fit a linear drain means cutting into the slab or joists, which adds $600 to $1,800.
- Shower size and layout. A standard 36×60 alcove is the cheapest footprint because materials and glass are off-the-shelf. A 48×72 curbless walk-in with bench seating needs more tile, more glass and more labor.
- Waterproofing standard. Long Beach sits right on the coast, and interior humidity is real. A proper cement board substrate (the moisture-resistant layer behind your tile) plus a bonded membrane is non-negotiable here. Skipping it saves a few hundred dollars up front and costs thousands in mold remediation later.
That last point is where cheap bids fall apart. A low number that skips the membrane or uses drywall behind tile isn’t a bargain; it’s a repair waiting to happen. When we quote a walk-in shower, the waterproofing line is always in it, in writing.

How to Save on Walk-In Shower Installation
You don’t need to cut corners to bring the number down. A few decisions do most of the work.
- Keep the drain where it is. This single choice often saves $600 to $1,800 by avoiding slab or joist work.
- Choose porcelain over natural stone. Porcelain performs well in a wet environment, costs less per square foot, and doesn’t need annual sealing the way marble does.
- Pick a standard-size footprint. A 36×60 alcove uses off-the-shelf pans and glass. Custom dimensions mean custom glass, and custom glass is where budgets stretch.
- Go semi-frameless instead of fully frameless. You keep most of the clean look and save $800 to $1,500 on the glass line.
- Bundle the shower with other bathroom work. If the vanity or flooring needs attention too, doing it in one project spreads the demolition and prep cost across more of the job.
One more way to save: get the price in writing before anyone touches a tool. A written price means no surprise change order after demo day, which is where most bathroom budgets actually blow up. Free estimates are part of every job we quote, so call (833) 510-6967 and we’ll walk your shower through the numbers before you commit to anything.
Why the Written Price Matters More Than the Lowest Bid
Most homeowners we meet have already been burned once. The story is usually the same: a verbal ballpark, then a call on demo day that the number just went up. Our answer to that is simple. Every homeowner gets a written price before any work starts, so the number on day one is the number on the invoice. And every project carries our 365-Day Done Right Promise: if the work fails inside the guarantee period, we come back and fix it at no charge. That’s covered in writing, not promised over the phone.
We work to The Kingswell Way, which comes down to three things: say the price before the work, show up in the arrival window we gave you, and leave the place cleaner than we found it. Background-checked, uniformed technicians handle every job, so you know exactly who’s walking into your home. A live person answers the phone around the clock; no voicemail maze, no callback window.
Prefab vs. Custom Tile Walk-In Showers: What’s the Real Cost Difference?
A prefab walk-in shower lands around $4,500 to $6,500, while a custom tiled walk-in with frameless glass runs $9,000 to $12,000. The gap comes down to materials, labor and how much is built to fit your exact space.
- Prefab units use a molded pan and surround. Installation is fast, off-the-shelf sizes keep costs predictable, and there are fewer seams to maintain. The tradeoff is limited design range and standard dimensions that may not fit an odd alcove.
- Custom tile is built to your wall-to-wall dimensions. You pick the tile, the drain style and the glass, and you can add a bench or a niche. It costs more in labor and materials but delivers a shower no prefab unit can match.
If you’re weighing this against a full bathroom overhaul, our main remodeling page lays out how shower work fits into a larger project budget.
What Does a Tub-to-Shower Conversion Cost in Long Beach?
A tub-to-shower conversion in Long Beach typically runs $3,500 to $10,000. It’s often less than a from-scratch walk-in shower because you’re reusing the existing plumbing and footprint, which trims the rough-in and drain work.
Whether a conversion or a full walk-in install is the better move depends on your tub’s condition and your drainage. In older Long Beach homes, cast-iron tubs on a raised platform can complicate access, while a standard alcove tub converts cleanly. The honest answer comes from looking at what’s behind the wall, and that’s what our free estimate does.
Can You Install a Walk-In Shower Without Moving the Drain?
Yes. Most walk-in shower installations keep the existing drain in place, which is one of the biggest cost savers in the whole project. As long as the new shower footprint covers the current drain location, you avoid cutting into the slab or joists and save $600 to $1,800.
If the layout demands a centered drain or a linear drain, the cost goes up, but it’s a known, quotable number, not a mystery. We tell you which path your shower takes before the work starts.
How Long Does Walk-In Shower Installation Take?
A straightforward prefab walk-in install usually takes 2 to 4 days. A custom tiled shower with frameless glass runs 5 to 10 days, because the waterproofing has to cure before tile goes down and the glass is measured after the tile is set.
Part of that timeline is deliberate. Waterproofing membranes need proper drying time, and rushing that step is how showers fail a year later. The wait is a feature, not a slowdown. For larger remodels, a small bathroom remodel and a shower install can often be sequenced to overlap, so you’re not waiting twice.
What Affects the Timeline and the Price Most
Two things hit both the schedule and the invoice: what’s behind the wall and how custom the design is. A shower hidden behind healthy tile finishes faster and cleaner than one with water damage underneath. A standard footprint moves faster than an L-shaped design with three glass panels.
We check the substrate and framing as part of the estimate, so the timeline we give you reflects reality, not a best-case guess. If we find rot or a soft subfloor, you hear about it before we start, with a written price for fixing it, not a surprise mid-project.
Frequently Asked Questions – Walk-In Shower Installation Cost
How much does walk-in shower installation cost in Long Beach?
Walk-in shower installation in Long Beach typically costs $4,500 to $12,000. A prefab unit with a standard footprint and semi-frameless glass sits near $4,500 to $6,500, while a fully tiled custom shower with a frameless panel runs $9,000 to $12,000. Call (833) 510-6967 for an exact quote; estimates are free.
Is it cheaper to repair or replace a walk-in shower?
If the pan or waterproofing has failed, replacement is usually cheaper than repeated repairs. A full replacement runs $4,500 to $12,000, while patching a leaking pan or re-tiling a section can run $1,500 to $4,000 and often fails again if the membrane underneath is the real problem. A repair makes sense when the failure is surface-level; a replacement wins when water has reached the substrate. Call us and we’ll tell you which one you’re looking at, with a written number either way.
Can you install a walk-in shower in a small Long Beach bathroom?
Yes. A 36×36 or 32×48 walk-in is a common fit for small bathrooms, and a curbless design can make a tight space feel larger. Costs land on the lower end, around $4,500 to $7,000, because smaller footprints use less tile and standard-size glass. Call (833) 510-6967 and we’ll measure your space before quoting.
Does a walk-in shower add value to a Long Beach home?
A walk-in shower is one of the most requested bathroom features in Long Beach because it works for every age and mobility level. While we don’t quote resale figures, the practical return is a bathroom that suits more buyers and needs less maintenance than a tub. What we can put in writing is the installation price and a guarantee that stands behind it.
Can you come today to look at my shower?
We take same-day estimate requests where the schedule allows, and a live person answers the phone around the clock at (833) 510-6967, so you’ll reach someone now, not a voicemail prompt. If today is full, we’ll give you a real arrival window, not a vague callback timeframe. Estimates are free, and the written price comes before any work starts.
Is a walk-in shower installation covered by a warranty?
Yes. Every walk-in shower we install carries our 365-Day Done Right Promise in writing: if the work fails inside the guarantee period, we come back and make it right at no charge. If a repair ever fails, the second visit is free, with no service call fee and no re-inspection charge. That’s part of every job, not an add-on.
Getting the Right Number the First Time
The cost of a walk-in shower in Long Beach is $4,500 to $12,000, and most of that spread comes down to three choices: tile, glass and layout. Get those choices and a clear check of what’s behind your wall before demo starts, and the price you’re quoted is the price you pay. Skip that step, and you’re back to the verbal ballpark that moves after the hammer swings.
We put the price and the guarantee in writing before a single tile is set. Materials come from brands we trust, including Kohler and Moen fixtures and Cambria and Caesarstone surfaces when a vanity or counter is part of the job. Our technicians bring up to 22 years of experience to every installation, arrive background-checked and in uniform, and leave the site cleaner than we found it. Call (833) 510-6967 for a free estimate, and we’ll walk your project through the numbers before you commit to anything. For a closer look at how we handle the broader job, see our bathroom and kitchen remodeling work.
Pricing reflects the Long Beach market as of 2026. Penhallow Remodeling Long Beach offers free estimates – call (833) 510-6967.
Written by the team at Penhallow Remodeling.
What Our Customers Say
"Gutted and redid the master bath. They gave me a schedule and actually stuck to it. Any time there was a choice to make they called me instead of guessing. Love the result."
- Kayla Benton"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson












